Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A New Way to Manufacture Ultra Light Metal Structures

초경량 금속구조재의 제작을 위한 새로운 방안

  • 강기주 (전남대학교 대학원 기계공학과) ;
  • 전계포 (전남대학교 기계시스템공학부) ;
  • 나성준 (전남대학교 기계시스템공학부) ;
  • 주보성 (전남대학교 기계시스템공학부) ;
  • 홍남호 (전남대학교 기계시스템공학부)
  • Published : 2004.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, the ultra light metal structure with periodic and three dimensional truss elements takes attention because of its multi-functionality and substantial heat resistance. However, the complicated fabrication process leading to high cost has been a major obstacle to wide applications. In this paper, a new idea to construct an ultra light structure with periodic, three dimensional truss using metal wires is presented. To prove the practical validity, a Kagome-like structure was fabricated from stamped wires and punched face sheets. It was assembled by soldering. Through three-point bending and compression tests, the strength was evaluated and compared with the theory.

Keywords

References

  1. Evans, A.G., Hutchinson, J.W. and Ashby, M.F., 1999, 'Multifunctionality of Cellular Metal Systems,' Progress in Materials Science, Vol. 43, pp. 171-221 https://doi.org/10.1016/S0079-6425(98)00004-8
  2. Evans, A.G., Hutchinson, J.W., Fleck, N.A., Ashby, M.F. and Wadleyal, H.N.G., 2001, 'The Topological Design of Multifunctional Cellular Metals,' Progress in Materials Science, Vol. 46, pp. 309-327. https://doi.org/10.1016/S0079-6425(00)00016-5
  3. Ashby, M.F., Evans, A.G., Fleck,N.A., Gibson,L.J.;Hutchinson,J.W. and Wadley, H.N.G. 2001, Metal Foam:A Design Guide, Butterworth Heinemann
  4. Deshphande, V.S., Fleck, N.A. and Ashby, M.F., 2001, 'Effective Properties of the Octet-Truss Lattice Material,' Journal of Mechanics and Physics of Solids, vol. 49, pp. 1747-1769 https://doi.org/10.1016/S0022-5096(01)00010-2
  5. Chiras, S., Mumm,D.R, Wicks,N., Evans, A.G., Hutchinson, J.W., Dharmasena, K. Wadley, H.N.G. and Fichter, S. 2002, 'The Structural Performance of Near-Optimized Truss Core Panels,' International Journal of Solids and Structures, Vol. 39, pp. 4093-4115 https://doi.org/10.1016/S0020-7683(02)00241-X
  6. Sypeck, D.J. and Wadley, H.N.G., 2001, 'Cellular Metal Truss Core Sandwich Structures,' Proceedings of the 2nd International Conference on Cellular Metals and Metal Foaming Technology(MetFoam 2001) editedby J. Banhart, M.F. Ashby, N. A. Fleck, pp. 381-386 https://doi.org/10.1002/1527-2648(20021014)4:10<759::AID-ADEM759>3.0.CO;2-A
  7. Sypeck, D.J.and Wadley, H.G.N., 2001, 'Multifuctional Microtruss Laminates:Textile Synthesis and Properties,' J. Mater. Res. Vol. 16, pp. 890-897. https://doi.org/10.1557/JMR.2001.0117
  8. Hyun, S., Karlsson, A. M., Torquato, S.and Evans, A.G., 2003, 'Simulated Properties of Kagome and Tetragonal Truss Core Panel,' Int. J. Solids and Structures, Vol. 40, pp. 6989-6998 https://doi.org/10.1016/S0020-7683(03)00350-0
  9. Howard G. Allen, 1969, Analysis and Design of Structural Sandwich Panels1st ed, Pergamon Press
  10. James M. Gere, 2001, Mechanics of Material 5th ed, Brooke/cole
  11. Bleich, F., 1952, Buckling Strength of Metal Structures, McGraw-Hill, p. 14
  12. Wicks, N. and Hutchinson, J.W., 'Optimal Truss Plates,' International Journal of Solids and Structures, Vol. 38, pp. 5165-5183 https://doi.org/10.1016/S0020-7683(00)00315-2
  13. Deshpande, V.S. and Fleck, N.A., 2000, 'High Strain Rate Compressive Behaivor of Aluminum Alloy Foams,' Int. J. of Impact Engineering, Vol. 24, pp.277-298 https://doi.org/10.1016/S0734-743X(99)00153-0

Cited by

  1. Design and Construction of a Loom for Obtaining Ultra-Light Metal Structure vol.34, pp.9, 2010, https://doi.org/10.3795/KSME-A.2010.34.9.1235