KIEE International Transactions on Power Engineering

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Resistive Hts-Fcl Emtdc Modeling By Using Probabilistic Design Methodology

  • Yoon, Jae-Young (Power System Research Group, Korea Electrotechnology Research Institute) ;
  • Kim, Jong-Yul (Power System Research Group, Korea Electrotechnology Research Institut) ;
  • Lee, Seung-Ryul (Power System Research Group, Korea Electrotechnology Research Institute)
  • Published : 2004.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Nowadays, one of the serious problems in the KEPCO system is a much higher fault current than the SCC (Short Circuit Capacity) of the circuit breaker. Since superconductivity technology has become more developed, the HTS-FCL (High Temperature Superconductor-Fault Current Limiter) may become an attractive alternative to solving the fault current problem. In order to achieve the best performance, the parameters of HTS-FCL should be designed optimally. Under this setting, this paper presents the optimal design method of parameters for resistive type HTS-FCL using the Monte Carlo technique.

Keywords

References

  1. KEPCO, A report on the reduction of fault current, 1995.11
  2. KERI, A basic study for the development of HVDC transmission system, 2002.6
  3. KERI, Comparisons of HTS-FCL, 2002.6
  4. M. Noe, B. R. Oswald, Technical and economical benefits of superconducting fault current limiters in power systems, IEEE Transactions on applied superconductivity, 1999.6
  5. J. N. Nielsen, J. J. Ostergaard, Applications of HTS fault current limiters in the Danish utility network
  6. H. Kameda, Setting method of specific parameters of a superconducting fault current limiter considering the operation of power system protection' IEEE Transactions on applied superconductivity, 1999.6
  7. Charles A. Gross, Power System Analysis
  8. EMTDC Manual, Custom Model, 1986