Modeling and Design Algorithm of Conducted EMI Filter Using a Noise Separation Method

노이즈 분리 기법을 이용한 진도EMI 필터의 모델링 및 설계 알고리즘

  • 정용채 (남서울대 전자정보통신공학부)
  • Published : 2004.06.01

Abstract

Because the EMI filter is mainly designed by trial and error method, it takes many times to reduce the conducted EMI noise in a power converter. Thus, a newly analytical design procedure is proposed to overcome the problem in this paper. High frequency models of each component are built, md, using the modeling circuits, the filter design is carried out applicable to each mode. Based on the accumulated database for practical components, and the measurement data of EUT with a standard filter, the filler design algorithm is presented. Finally, the validity of the Proposed models and design method is verified through the measurement results.

EMI필터는 주로 시행착오 법에 의해서 설계하기 때문에, 전력변환기기의 전도 EMI를 감쇠시키기 위해서는 많은 시간을 요하게 된다. 따라서 본 논문에서는 이러한 문제를 극복하기 위해서 EMI 필터에 대한 새로운 분석적인 설계절차를 제안한다. 각 부품에 대한 고주파 모델을 구성하고, 이러한 모델링 회로를 이용하여 각 모드에 적용할 수 있는 필터를 설계한다. 실제 사용되는 부품에 대한 축적된 데이터 베이스와 표준필터를 적용한 EUT(Equipment Under Test)의 측정 데이터를 기초로 해서 필터를 설계하는 알고리즘을 제안한다. 끝으로, 측정결과를 통해서 제안된 모델과 설계방법의 타당성을 확인한다.

Keywords

References

  1. 전력전자학회 논문지 v.6 no.2 저전력 스위칭 전원회로에서의 EMI 분석 및 대책 정용채
  2. IEEE Transactions on Electromagnetic Compatibility v.30 no.4 Diagnosis and Reduction of Conducted Noise Emissions Clayton R.Paul;Keith B.Hardin
  3. IEEE Transactions on Power Electronics v.11 no.3 Separation of the Common-mode- and Differential-Mode-Conducted EMI Noise Ting Guo;Dan Y.Chen;Fred C.Lee
  4. IEEE APEC'02 Devices for the Separation of the Common and Differential Mode Noise: Design and Realization Marco C.Caponet;Francesco Profumo
  5. IEEE APEC'98 Computer-Aided Analysis and Reduction of Conducted EMI in Switched-Mode Power Converter Philip F.Okyere;Lothar Heinemann
  6. IEEE PESC'02 High Frequency Characteristic Analysis of EMI Filter in Switch Mode Power Supply (SMPS) D.H.Liu;J.G.Jiang
  7. IEEE Transactions on Power Electronics v.11 no.1 A Procedure for Designing EMI Filters for AC Line Applications F.Y.Shih;D.Y.Chen;Y.P.Wu;Y.T.Chen
  8. IEEE IAS'00 Systematic Design of EMI Filters for Power Converters A.Nagel;R.W.DeDoncker
  9. IEEE PESC'02 EMI Filters Design for Power Electronics Marco C.Caponet;Francesco Profumo;Alberto Tenconi
  10. IEEE APEC'03 EMI Filter Design Method for Communication Power SubSystem Sheng Ye;Yan Fei Liu
  11. Electromagnetic Compatibility in Power Electronics L.Tihanyi