DOI QR코드

DOI QR Code

Flux Pinning Enhancement and Irreversibility Line of Sm doped YBCO Superconductor by Zone Melt Growth Process

  • Kim, So-Jung (Department of Electrical and Electronic Engineering, Dong Hae University)
  • Published : 2004.04.01

Abstract

High T$\_$c/ (Sm/Y)$\_$1.8/Ba$\_$2.4/Cu$\_$3.4/O$\_$7-$\delta$/ [(Sm/Y)] superconductor, a combination of Y and Sm(50% each), was systematically investigated by the zone melt growth process. A sample prepared by this method showed well-textured microstructure, and (Sm/Y)$_2$BaCuO$\_$5/[(Sm/Y)211]inclusions were uniformly dispersed in large (Sm/Y)Ba$_2$Cu$_3$O$\_$y/ [(Sm/Y)123]matrix. The sample showed a sharp superconducting transition at 91 K. The magnetization measurements of the (Sm/Y)1.8 sample exhibited the enhanced flux pinning, compared with Y$\_$1.8/Ba$\_$2.4/Cu$\_$3.4/O$\_$7-$\delta$/(Y1.8) sample without Sm. Critical current densities of (Sm/Y) 1.8 sample was 3.5${\times}$10$^4$A/$\textrm{cm}^2$ at 1 T and 77 K.

Keywords

References

  1. P. McGinn, W. Chen, N. Zhu, M. Lanagan, and U.Balanchandran, 'Microstructure and critical current density of zone melt textured $$YBa_2Cu_3O_6_+_x$$', Appl. Phys. Lett., Vol. 57, No. 14, p. 1455, 1990 https://doi.org/10.1063/1.104125
  2. Donglu Shi, H. Krishnan, J. M. Hong, and D. Miller, 'Transport critical current density and microstructure in extruded $YBa_2Cu_3O_7_-_x$ wires processed by zone melting', J. Appl. Phys., Vol. 68, No.1, p. 228, 1990 https://doi.org/10.1063/1.347122
  3. F. Giovannelli, S. Marinel, and I. Monot-Laffez, 'Melt processing of (light rare earth) $Ba_2Cu_3O_y$ materials by the floating zone method', Supercond. Sci. Technol., Vol. 15, p. 533, 2002 https://doi.org/10.1088/0953-2048/15/4/309
  4. P. McGinn, N. Zhu, W. Chen, S. Sengupta, and T. u, 'Microstructure and critical current density of zone melt textured $$YBa_2Cu_3O_6_+_x$$ with $Y_ $BaCu$O_5$ additions', Physica C, Vol. 176, p. 203, 1991 https://doi.org/10.1016/0921-4534(91)90714-A
  5. M. Murakami, S. Gotoh, H. Fujimoto, K. Yamaguchi, N. Koshizuka, and S. Tanaka, 'Flux pinning and critical currents in melt processed YBaCuO superconductors', Supercond. Sci. Technol., Vol. 4, p. 43, 1991 https://doi.org/10.1088/0953-2048/4/2/001
  6. S. I. Yoo, N. Sakai, T. Higuchi, and M. Murakami, 'Melt processing for obtaining $NdBa_2Cu_3O_y$ superconductors with high $T_c$ and large $J_c$', Appl. Phys. Lett., Vol. 65, No.5, p. 633, 1994 https://doi.org/10.1063/1.112254
  7. S. I. Yoo, M. Murakami, N. Sakai, T. Higuchi, and S. Tanaka, 'Enhanced $T_c$ and Strong Flux Pinning in Melt-Processed $NdBa_2Cu_3O_y$ Superconductors', Jpn. J. Appl. Phys., Vol. 33, p. LlOOO, 1994
  8. M. Murakami, S. I. Yoo, T. Higuchi, N. Sakai, M. Watanabiki, N. Koshizuka, and S. Tanaka, 'A new type of pinning center in melt grown Nd123 and SmI23', Physica C, Vol. 235, p. 2781, 1994 https://doi.org/10.1016/0921-4534(94)92611-5
  9. S. J. Kim and H. G. Kim, 'Effects of 211 inclusions on zone melt-textured (RE/Y)-Ba-Cu-O superconductors', Physica C, Vol. 338, p. 110,2000 https://doi.org/10.1016/S0921-4534(00)00211-2
  10. S. J. Kim, 'Melt Textured Growth and Superconducting Properties of $RE^3^+$ Elements Doped YBCO Superconductors', J. of KIEEME(in Korea), Vol. 16, No.3, p. 231, 2003
  11. E. M. Gyory, R. B. van Dover, K. A. Jacson, L. F. Schneemeyer, and J. V. Waszczak, 'Anisotropic critical currents in TEX>$Ba_2YC_3O_7$ analyzed using an extended Bean model', Appl. Phys. Lett., Vol 55, No.3, p. 283, 1989 https://doi.org/10.1063/1.102387
  12. N. Ihara and T. Matsushita, 'Effect of flux creep on irreversibility lines in superconductors', Physica C, Vol. 257, p. 223, 1996 https://doi.org/10.1016/0921-4534(95)00534-X

Cited by

  1. Crystal growth and transport current properties of cylindrical (YSmNd)-Ba-Cu-O superconductors by zone melt growth method vol.21, pp.5, 2011, https://doi.org/10.6111/JKCGCT.2011.21.5.199