DOI QR코드

DOI QR Code

Feasibility Verification of Cryogenic Ball Bearings for a Turbopump

터보펌프용 극저온 볼 베어링의 성능검증

  • 곽현덕 (한국항공우주연구원 터보펌프개발그룹) ;
  • 전성민 (한국항공우주연구원 터보펌프개발그룹) ;
  • 김진한 (한국항공우주연구원 터보펌프개발그룹) ;
  • 조광래 (한국항공우주연구원 우주발사체사업단) ;
  • 김선용 ((주)로템 기술연구소) ;
  • 우관제 ((주)로템 기술연구소)
  • Published : 2004.08.01

Abstract

In a turbopump cryogenic ball bearings are used to carry static and hydraulic loads, and these ball bearings must stand up to high load and speed in cryogenic circumstance. Verification of bearing performance is crucial to successful development of a turbopump. In this paper, focusing on the turbopump under developing by KARI, the performances of 203 and 207 bearings are verified through the series of tests simulating the real operating condition of turbopump.

Keywords

References

  1. 이용복, 김창호, 곽현덕, 하태웅, 우유철, '탄성 링을 갖는 볼 베어링 지지의 터보 펌프 임계속도에 관한 연구', 유체기계공업학회 유체기계저널, 제4권 제2호, pp. 22-28, 2001
  2. H.D. Kwak, Y.B. Lee, C.H. Kim, T.W. Ha and Y.C.Woo, 'Prediction of Rotordynamic Stability for the High Pressure, High Speed Turbopump Unit,'IFToMM 6th Int'l Conf. on Rotordynamics, Univ. of New South Wales, Sydney, pp. 478-485, 2002
  3. D.W. Childs, 'The Space Shuttle Main Engine High-Pressure Fuel Turbopump Rotordynamic InstabilityProblem,' ASME Journal of Engineering for Power,No. 100,pp. 49-57, 1978
  4. 전성민, 김진한, '30 ton급 터보펌프의 회전체 동역학 설계 및 해석,' 한국항공우주학회 2003년도 추계학술대회, pp. 976-979, 2003
  5. 김진한, 이은석,홍순삼, 최창호, 전성민,정은환, '액체로켓엔진용 터보펌프 개발현황,' 제5회 우주발사체기술 심포지움, KAIST, 발표예정, 2004
  6. 우관제,김경호,우유철, '터보펌프 시스템용 베어링/실 시험설비 개발,' 한국추진공학회 2003년도 추계학술대회, pp. 25-28, 2003

Cited by

  1. 회전체 동력학 및 회전기 요소의 연구동향 vol.8, pp.1, 2004, https://doi.org/10.5293/kfma.2005.8.1.067
  2. 액체로켓 터보펌프의 임계 속도 해석 vol.33, pp.6, 2004, https://doi.org/10.5139/jksas.2005.33.6.092
  3. 케이징 구조 유연성을 고려한 터보펌프 임계 속도 해석 vol.34, pp.6, 2004, https://doi.org/10.5139/jksas.2006.34.6.092
  4. 터보펌프 볼 베어링의 마찰 토크 평가 vol.27, pp.1, 2004, https://doi.org/10.9725/kstle.2011.27.1.025