Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Excimer Laser Ablation of Polymer for Electroformed Mold

전주금형 제작을 위한 폴리머의 엑시머 레이저 어블레이션

  • 이제훈 (한국기계연구원 레이저응용시스템그룹) ;
  • 신동식 (한국기계연구원 레이저응용시스템그룹) ;
  • 서정 (한국기계연구원 레이저응용시스템그룹) ;
  • 김도훈 (연세대학교 금속공학과)
  • Published : 2004.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Manufacturing process for the microfluidic device can include such sequential steps as master fabrication, electroforming, and injection molding. The laser ablation using masks has been applied to the fabrication of channels in microfluidic devices. In this study, manufacturing of polymer master and mold insert for micro injection molding was investigated. Ablation of PET (polyethylene terephthalate) by the excimer laser radiation could be used successfully to make three dimensional master fur nickel mold insert. The mechanism fur ablative decomposition of PET with KrF excimer laser $({\lambda}: 248 nm, pulse duration: 5 ns)$ was explained by photochemical process, while ablation mechanism of PMMA (polymethyl methacrylate) is dominated by photothermal process, the .eaction between PC (polycarbonate) and KrF excimer laser beam generate too much su.face debris. Thus, PET was adopted in polymer master for nickel mold insert. Nickel electroforming using laser ablated PET master was preferable for replication method. Finally, it was shown that excimer laser ablation can substitute for X-ray lithography of LIGA process in microstructuring.

Keywords

References

  1. Madou, Marc, 'Fundamentals of Microfabrication,' CRC Press, pp. 275-323, 1997
  2. Erdogan, T., Mizrahi, V., 'Fiber Phase Gratings Reflect Advances in Lightwave Technology,' Laser Focus World Vol. 30, No. 2, pp. 73-80, February 1994
  3. Dong, L., Archambault, J.L., 'Single Pulse Bragg gratings Written during Fiber Drawing,' Electronics Letters Vol.29, No. 17, pp. 1577, 1993 https://doi.org/10.1049/el:19931051
  4. Duley, W.W., 'UV Lasers: Effects and Applications in Materials Science,' Cambridge, pp. 148-199, 1996
  5. Rumsby, P. T., Harvey, E. C., Thomas, D. W., 'Laser Microprojection for Micromechanical Device Fabrication,' proc. SPIE Vol. 2921, pp. 684-692, 1996 https://doi.org/10.1117/12.269796
  6. Harvey, E. C., Rumsby, P. T., 'Fabrication Techniques and Their Application to Produce Novel Micromachined Structures and Devices using Excimer Laser Projection,' proc. SPIE Vol.3223, pp. 26-33, September 1997 https://doi.org/10.1117/12.284497
  7. Rizvi, N. H., Rumsby, P. T., Gower, M. C., 'New Developments and Applications in the Production of 3D Micro-structures by Laser Micro-machining,' proc. SPIE Vol.3898, pp.240-249, November 1999 https://doi.org/10.1117/12.368513
  8. Ptleging, W., Hanemann, T., 'Laser Micromachning of Mold Inserts for Replication Techniques-State of the art and Applications,' proc. SPIE Vol.4274, 2001 https://doi.org/10.1117/12.432527
  9. Choi, J. H., Park, Y. S., 'UV/Vis and Atomic Absorption Spectrometry,' Woo-Yong, pp. 34-64, 1998
  10. Tosto, S., 'Modeling and Computer Simulation of Pulsed-laser Induced Ablation,' Appl. phys. A 68, pp. 439-446, 1999 https://doi.org/10.1007/s003390050920
  11. Goodman, J. W., 'Introduction to Fourier Optics,' McGraw-Hill, pp. 83-125, 1996