Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Endochronic simulation for viscoplastic collapse of long, thick-walled tubes subjected to external pressure and axial tension

  • Lee, Kuo-Long (Department of Mechanical Engineering, Far East College) ;
  • Chang, Kao-Hua (Department of Engineering Science, National Cheng Kung University)
  • Received : 2003.11.07
  • Accepted : 2004.06.04
  • Published : 2004.11.25
⟨ Previous Next ⟩

Abstract

In this study, the endochronic theory was used to investigate the collapse of thick-walled tubes subjected to external pressure and axial tension. The experimental and theoretical findings of Madhavan et al. (1993) for thick-walled tubes of 304 stainless steel subjected to external pressure and axial tension were compared with the endochronic simulation. Collapse envelopes for various diameter-to-thickness tubes under two different pressure-tension loadings were involved. It has been shown that the experimental results were aptly described by the endochronic approach demonstrated from comparison with the theoretical prediction employed by Madhavan et al. (1993). Furthermore, by using the rate-sensitivity function of the intrinsic time measure proposed by Pan and Chern (1997) in the endochronic theory, our theoretical analysis was extended to investigate the viscoplastic collapse of thick-walled tubes subjected to external pressure and axial tension. It was found that the pressure-tension collapse envelopes are strongly influenced by the strain-rate during axial tension. Due to the hardening of the metal tube of 304 stainless steel under a faster strain-rate during uniaxial tension, the size of the tension-collapse envelope increases.

Keywords

Acknowledgement

Supported by : National Science Council

References

  1. Corona, E. and Kyriakides, S. (1988), "On the collapse of inelastic tubes under combined bending and pressure", Int. J. Solids Struct., 24(5), 505-535. https://doi.org/10.1016/0020-7683(88)90005-4
  2. Corona, E. and Kyriakides, S. (1991), "An experimental investigation of the degradation and buckling of circular tubes under cyclic bending and external pressure", Thin-Walled Struct., 12, 229-263. https://doi.org/10.1016/0263-8231(91)90048-N
  3. Dyau, J.Y. and Kyriakides, S. (1993), "On the propagation pressure of long cylindrical shells under external pressure", Int. J. Mech. Sci., 35, 675-713. https://doi.org/10.1016/0020-7403(93)90018-P
  4. Fan, J. (1983), "A comprehensive numerical study and experimental verification of endochronic plasticity", Ph.D. Dissertation, Department of Aerospace Engineering and Applied Mechanics, University of Cincinnati.
  5. Ikegami, K. and Ni-Itsu, Y. (1983), "Experimental evaluation of the interaction effect between plastic and creep deformation", Proc. of Plasticity Today Symposium, Udine, Italy, 27-30.
  6. Im, S. and Atluri, S.N. (1987), "A study of two finite strain plasticity models: An internal time theory using Mandel's director concept and a general isotropic/kinematic-hardening theory", Int. J. Plasticity, 3, 163-191. https://doi.org/10.1016/0749-6419(87)90005-2
  7. Krempl, E. (1979), "An experimental study of room-temperature sensitivity, creep and relaxation of AISI 304 stainless steel", J. Mech. Phys. Solids, 27, 363-375. https://doi.org/10.1016/0022-5096(79)90020-6
  8. Kujawski, D. and Krempl, E. (1981), "The rate(time)-dependent behavior of $Ti_7Al_2Cb_1Ta$ titanium alloy at room temperature under quasi-static monotonic and cyclic loading", J. Appl. Mech., ASME, 48, 55-63. https://doi.org/10.1115/1.3157592
  9. Kyogoku, T., Tokimasa, K., Nakanishi, H. and Okazawa, T. (1981), "Experimental study on the effect of axial tension load on the collapse strength of oil well casing", OTC 4108, 387-395.
  10. Kyriakides, S. and Ju, G.T. (1992a), "Bifurcation and localization instabilities in cylindrical shells under bending, - I. Experiments", Int. J. Solids Struct., 29(9), 1117-1142. https://doi.org/10.1016/0020-7683(92)90139-K
  11. Kyriakides, S. and Ju, G.T. (1992b), "Bifurcation and localization instabilities in cylindrical shells under bending, - II. Predictions", Int. J. Solids Struct., 29(9), 1143-1171. https://doi.org/10.1016/0020-7683(92)90140-O
  12. Kyriakides, S. and Shaw, P.K. (1982), "Response and stability of elastoplastic circular pipes under combined bending and external pressure", Int. J. Solids Struct., 18(11), 957-973. https://doi.org/10.1016/0020-7683(82)90086-5
  13. Kyriakides, S. and Shaw, P.K. (1987), "Inelastic buckling of tubes under cyclic loads", J. Press. Vessel Tech., ASME, 109, 169-178. https://doi.org/10.1115/1.3264891
  14. Kyriakides, S. and Yeh, M.K. (1988), "Plastic anisotropy in drawn metal tubes", J. Engng. Ind., ASME, 110, 303-307. https://doi.org/10.1115/1.3187886
  15. Lee, K.L. and Pan, W.F. (2001), "Viscoplastic collapse of titanium alloy tubes under cyclic bending", Int. J. Struct. Engng. Mech., 11(3), 315-324. https://doi.org/10.12989/sem.2001.11.3.315
  16. Madhavan, R., Babcock, C.D. and Singer, J. (1993), "On the collapse of long, thick-walled tubes under external pressure and axial tension", J. Press. Vessel Tech., 115, 15-26. https://doi.org/10.1115/1.2929488
  17. Murakami, J. and Read, H.E. (1989), "A second-order numerical scheme for integrating the endochronic plasticity equations", Comp. Struct., 31, 663-672. https://doi.org/10.1016/0045-7949(89)90200-9
  18. Pan, W.F. (1997), "Endochronic simulation for finite viscoplastic deformation", Int. J. Plasticity, 13(6/7), 571-586. https://doi.org/10.1016/S0749-6419(97)00026-0
  19. Pan, W.F. and Chern, C.H. (1997), "Endochronic description for viscoplastic behavior of materials under multiaxial loading", Int. J. Solids Struct., 34(17), 2131-2159. https://doi.org/10.1016/S0020-7683(96)00118-7
  20. Pan, W.F. and Chiang, W.J. (1998), "Endochronic simulation for muitiaxial creep", Int. Journal, Series A, JSME, 41(2), 204-210. https://doi.org/10.1299/jsmea.41.204
  21. Pan, W.F., Chiang, W.J. and Wang, C.K. (1999), "Endochronic analysis for rate-dependent elasto-plastic deformation", Int. J. Solids Struct., 36, 3215-3237. https://doi.org/10.1016/S0020-7683(98)00145-0
  22. Pan, W.F. and Her, Y.S. (1998), "Viscoplastic collapse of thin-walled tubes under cyclic bending", J. Engng. Mat. Tech., ASME, 120, 287-290. https://doi.org/10.1115/1.2807015
  23. Pan, W.F. and Hsu, C.M. (1999), "Viscoplastic analysis of thin-walled tubes under cyclic bending", Int. J. Struct. Engng. Mech., 7(5), 457-471. https://doi.org/10.12989/sem.1999.7.5.457
  24. Pan, W.F. and Lee K.L. (2002), "The effect of mean curvature on the response and collapse of thin-walled tubes under cyclic bending", Int. J., Series A, JSME, 45(2), 309-318. https://doi.org/10.1299/jsmea.45.309
  25. Pan, W.F., Lee, T.H. and Yeh. W.C. (1996), "Endochronic analysis for finite elasto-plastic deformation and application to metal tube under torsion and metal rectangular block under biaxial compression", Int. J. Plasticity, 12(10), 1287-1316. https://doi.org/10.1016/S0749-6419(95)00054-2
  26. Pan, W.F. and Leu, K.T. (1997), "Endochronic analysis for viscoplastic collapse of thin-walled tube under combined bending and external pressure", Int. J., Series A, JSME, 40(2), 189-199.
  27. Park, T.D. and Kyriakides, S. (1996), "On the collapse of dented cylinders under external pressure", Int. J. Mech. Sci., 38(5), 557-578. https://doi.org/10.1016/0020-7403(95)00065-8
  28. Peng, X. and Ponter, A.R.S. (1993), "Extremal properties of endochronic plasticity, Part I: Extremal path of the constitutive equation without a yield surface, Part II: Extremal path of the constitutive equation with a yield surface and application", Int. J. Plasticity, 9, 551-581. https://doi.org/10.1016/0749-6419(93)90019-M
  29. Shaw, P.K. and Kyriakides, S. (1985), "Inelastic analysis of thin-walled tubes under cyclic bending", Int. J. Solids Struct., 21(11), 1073-1110. https://doi.org/10.1016/0020-7683(85)90044-7
  30. Stuiver, W. and Tomalin, P.F. (1959), "The failure of tube under combined external pressure and axial load", SESA Proc., 16(2), 39-48.
  31. Tamano, T., Mimura, H. and Yanagimoto, S. (1982), "Examination of commercial casing collapse strength under axial loading", Proc. of the 1st Offshore Mechanics/Artic Engineering/Deep Sea Systems Symposium, ASME 1, 113-118.
  32. Valanis, K.C. (1980), "Fundamental consequence of a new intrinsic time measure-plasticity as a limit of the endochronic theory", Arch. Mech., 32, 171-191.
  33. Watanabe, O. and Atluri, S.N. (1985), "A new endochronic approach to computational elasto-plasticity: An example of cyclically loaded cracked plate", J. Appl. Mech., 25, 857-864.
  34. Watanabe, O. and Atluri, S.N. (1986), "Constitutive modeling of cyclic plasticity and creep, using an internal time concept", Int. J. Plasticity, 2(2), 107-134. https://doi.org/10.1016/0749-6419(86)90008-2
  35. Wu, H.C., Lu, J.K. and Pan, W.F. (1995), "Endochronic equations for finite plastic deformation and application to metal tube under torsion", Int. J. Solids Struct., 32(8/9), 1079-1097. https://doi.org/10.1016/0020-7683(94)00184-X
  36. Wu, H.C. and Ho, C.C. (1995), "Strain hardening of annealed 304 stainless steel by creep", J. Engng. Mat. Tech., ASME, 117, 260-267. https://doi.org/10.1115/1.2804538
  37. Wu, H.C., Wang, T.P., Pan, W.F. and Xu, Z.Y. (1990), "Cyclic stress-strain response of porous aluminum", Int. J. Plasticity, 6, 207-230. https://doi.org/10.1016/0749-6419(90)90022-7
  38. Yeh, M.K. and Kyriakides, S. (1986), "On the collapse of inelastic thick-walled tubes under external pressure", J. Energy Res. Tech., ASME, 18, 35-47.

Cited by

  1. Buckling failure of 310 stainless steel tubes with different diameter-to-thickness ratios under cyclic bending vol.10, pp.3, 2010, https://doi.org/10.12989/scs.2010.10.3.245
  2. Endochronic simulation for the response of 1020 carbon steel tubes under symmetric and unsymmetric cyclic bending with or without external pressure vol.8, pp.2, 2004, https://doi.org/10.12989/scs.2008.8.2.099
  3. Time-dependent and inelastic behaviors of fiber- and particle hybrid composites vol.34, pp.4, 2004, https://doi.org/10.12989/sem.2010.34.4.525