A Study on the Optimal Installation of Solar Photovoltaic System in Korea

국내 태양광발전시스템의 최적 설치에 관한 연구

  • Published : 2004.09.30

Abstract

The measured solar radiation incident on tilted surfaces by all directions has been widely used as important solar radiation data in installing photovoltaic modules. To maximize the incident beam radiation, the slope, which is the angle between the plane of the surface in question and the horizontal, an4 the solar azimuth angles are needed for these solar photovoltaic systems. This is because the performance of the solar photovoltaic systems is much affected by angle and direction of incident rays. Recognizing those factors mentioned above are of importance, actual experiment has been performed in this research to obtain the an91e of inclination with which the maximum incident rays can be absorbed. The results obtained in this research could be used in installing optimal photovoltaic modules.

Keywords

References

  1. J.A. Duffie and W.A. Beckman, Solar Engineering of Thermal Process, Wiley New York, pp. 3-145, 1991
  2. D. Feuermann, and A. Zemel, Validation of Models For Global Irradiance, on Inclined Planes, Solar Energy, Vol. 48, No. 1, pp. 59-66, 1992 https://doi.org/10.1016/0038-092X(92)90177-C
  3. T.M. Klucher, Evaluation of Models to Predict Insolation on Tilted Surface, Solar Energy, Vol. 23, pp. 111-114, 1992
  4. J.L. Wise, Analysis of Solar Radiation Measurements on An Inclined Surface in Anchorage Alaska, AEIDC Publication, 1980
  5. H. P Garg, Treatise on Solar Energy, John Wiley & Sons, Inc., 1982