Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

Magnetic Abrasive Polishing for Internal Face of Seamless Stainless Steel Tube Using Sludge Abrasive Grain

슬러지 연마입자를 이용한 이음매 없는 스테인리스강 튜브내면의 자기연마

  • Published : 2004.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper deals with behavior of the magnetic abrasive using sludge on polishing characteristics in a new internal finishing of seamless stainless steel tube applying magnetic abrasive polishing. The magnetic abrasive using sludge-abrasive grain WA and GC used to resin bond fabricated low temperature. And sludge of magnetic abrasive powder fabricated that sludge was crused into 200 mesh. The previous research have made an experiment in the static state the movement of magnetic abrasive grain is nevertheless in the dynamic state. In this paper, We could have investigated into the changes of the movement of magnetic abrasive grain. In reference to this result, we could have made the experiment which is set under the condition of the magnetic flux density, polishing velocity according to the form of magnetic brush.

Keywords

References

  1. G. H. Kim, J. H. Kang, S. O. An and J. K. Park, 'A Study on the Internal Grinding to Improvingthe Grinding Efficiency,' Transactions of KSAE, Vol.2, No.6, pp.87-93, 1994
  2. H. Yamaguchi, T. Shinmura and T. Kaneko,'Development of a New Internal Finishing Process Applying Magnetic Abrasive Finishingby Use of Pole Rotation System,' Int. Journal of JSPE, Vol.30, No.4, pp.317-322, 1966
  3. M. Anzai and T. Nakagawa, 'Improve the Efficient of Magnetic Finishing,' SEISANKENKYU, Vol.45, No.12, pp.816-820, 1993
  4. T. Shinmura and H. Yamaguchi, 'Study on a New Internal Finishing Process by Applying Magnetic Abrasive Machining,' Journal of JSME, Vol.59, No.560, pp.293-299, 1993
  5. T. Shinmura, Y. Hamano and H. Yamaguchi,'A New Precision Deburring Process for Inside Tubes by the Application of Magnetic Abrasive Machining,' J. of JSME, Vol.64, No.620,pp.312-318, 1998
  6. T. Shinmura and T. Aizawa, 'Study on Internal Finishing of a Non-ferromagnetic Tubing by Magnetic Abrasive Machining Process,' Journal of JSPE, Vol.54, No.4, pp.767-773, 1987
  7. M. Anzai, T. Sudo and T. Nakagawa, 'Development of Magnetic Abrasive and It's Finishing Characteristics,' SEISAN KENKYU, Vol.43, No.11, pp.13-22, 1991
  8. H. N. Kim, Y. K. Yun and J. W. Shim, 'Ultra Finishing by Magnet-abrasive Grinding for Internal-face of STS304 Pipe,' Proceedings of the Korean Society of Precision Engineering Conference, pp.947-952, 2001.10
  9. H. N. Kim, Y. K. Yun and J. W. Shim, 'Super Precise Finishing of Internal-face in STS304 pipe Using The Magnetic Abrasive Polishing,' Journal of the Korea Institute of Industrial Safety, Vol.17, No.3. pp.30-35, 2002
  10. H. N. Kim, S. K. Song, Y. J. Chung, Y. K. Yun, H. W. Kim, S. W. Cho and J. W. Shim, 'Development of The Magnetic Abrasive Using Ba-Ferrite,' Journal of the Korea Institute of Industrial Safety, Vol.18, No.2. pp.46-49, 2003
  11. H. N. Kim, S. K. Song, Y. K. Yun, H. W. Kim,B. S. Kim, H. J. Ahn and J. W. Shim, 'The Effects of Ba-Ferrite Magnetic Abrasive Beha-vior on Polishing Characteristics,' Proceedingsof the Korean Society of Precision Engineering Conference, pp.565-568, 2003.6
  12. H. N. Kim, D. W. Soh, Y. K. Yun, S. B. Kim and H. S. Choi, 'Magnet-abrasive Polishing for Internal- face of Seamless Stainless Steel Tube Using Sludge-abrasive Grain,' 2003 KSAE Fall Conference, pp.867-872, 2003