Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

The Effects of Torsional Characteristics according to Mounting Method of the Frame of a Large-sized Truck on Dynamic Performance

대형트럭 프레임의 결합방법에 따른 비틀림 특성이 동적 성능에 미치는 영향

  • Published : 2005.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper evaluates dynamic performance of a cab over type large-sized truck for estimating the effects of frame's torsional characteristics using a computer model. The computer model considers two mounting methods of frame, flange mounting and web mounting. Frame is modeled by finite elements using MSC/NASTRAN In order to consider the flexibility of frame. The torsional test of the frame is conducted In order to validate the modeled finite element model. A load cell is used to measure the load applied to the frame. An angle sensor is used to measure the torsional angle. An actuator is used to apply a load to the frame. To estimate the effects of frame's torsional characteristics on dynamic performance, simulations are performed with the flange mounting and web mounting frame. Simulation results show that the web mounting frame's variations of roll angle, lateral acceleration, and yaw rate are larger than the flange mounting frame's variations, especially in the high velocity and the second part of the double lane course.

Keywords

References

  1. 이상범, 2002, 차량 동특성에 대한 프레임의 유연성 효과, 한국공작기계학회, 제11권, 제2호, pp.80-86
  2. 문일동, 오재윤 2003. 프레임을 유연체로 고려한 대형트럭 컴퓨터 모델 개발, 한국자동차공학회, 제11권. 제6호, pp. 197-204
  3. 이병림, 2002, 프레임 강성이 차량의 조종안 정성에 미치는 영향, 한국자동차공학회, 제10권, 제4호, pp. 100-105
  4. Kang, D. K, Yoo, W. S., 1997, Effects of Suspension Compliance and Chassis Flexibility in Handing Performance, KSPE Vol. 14, No.7, pp.137-143
  5. McNitt. L. F., 1969, Truck Frame Side Rail Bulking Stresses, SAE Paper 690176
  6. ADAMS User's Manual, 2001, MacNeal-Schwendler Corporation, USA
  7. MSC.NASTRAN User's Manual, 1994, MacNeal-Schwendler Corporation, USA
  8. Antoun, R. J., Hackert. P.B., O'Leary, M. C., Sitchin, A., 1986, Vehicle Dynamic Handling Computer Simulation Model Development. Correlation, and Application Using ADAMS, SAE Paper 860574
  9. MSC.PATRAN User's Manual, 1994, MacNeal-Schwendler Corporation, USA
  10. SAE, 1975, Test Procedure for a Severe Lane Change Manoeuvre, ISO Technical Report 3888