Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Prediction of the Dynamic Characteristics of a Bolt-Joint Plates According to Bolting Conditions

볼트 체결 조건에 따른 두 판재의 동적 특성 예측

  • 홍상준 (삼성전자 메카트로닉스센터) ;
  • 이동진 (삼성전자 메카트로닉스센터) ;
  • 유정훈 (연세대학교 기계공학부)
  • Published : 2005.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

General systems have many substructures assembled at joints. The bolted joint is generally used in assembling the mechanical parts. However, there are no effective modeling methods to analyze the dynamic characteristics of bolt jointed structure using the finite element (FE) analysis, especially in case of large area contact. Moreover, the design methods for the appropriate bolt locations and the number of bolts considering the dynamic characteristics are not guided properly. In this study, a proper modeling method is developed to simulate the dynamic characteristics of a structure with the large interfaced area using the cone frusta method and spring elements. The natural frequencies are also controlled by adjusting the bolt-joint location and the number of bolts considering relative distances in mode shapes at the interface of bolt-jointed plates. The Modeling method and the optimized design method are verified based on the experimental and the FE analysis results.

Keywords

References

  1. Wang, J. H. and Liou, C. M., 1990, 'Experimental Substructure Synthesis with Special Consideration of Joint Effects,'The international Journal of Analytical and Experimental Modal Analysis, pp. 13-24
  2. Jung, J. H.,Jee, T.H. and Park, Y.P., 1994, ' Modal Analysis of plate by Substructure Synthesis method,'Journal of the Korean Society of Precision Engineering, Vol. 11, No.6.,pp264-74
  3. Kim, J. G., Park, S. S., Kim, Y. Y., Choi, S. H. and Kim, B. K,, 1996, 'Finite Element Modelling and Experimental Verification of the Structres with bolted Joins, ' Trans. of KSME (A), vol. 20, No. 6, pp. 1854-1861
  4. Ahmadian, H. and Ebrahimi, M., 2002, 'Identification of Bolted -joint interface models,' ISMA 27, pp. 1741-1747
  5. Kim, S. M., Ha, J. H. and Lee, S. K. 1999, 'Effects of Flange Hoint on the Vibrational Characteristics of the External Cylindrical Grinding Wheel Spindle,'Journal of the Korean society of Precision Engineering, Vol. 16,No.10,pp.108-125
  6. Kwon, Y. D., Goo, N. S. M., Kim, S. Y. and Cho, M. H., 2002,'Finite Element Modeling for Static And Dynamic Analysis of Structures with Bolted Joints,' Trans. of KSME (A), Vol.26, No.4, pp.667-676 https://doi.org/10.3795/KSME-A.2002.26.4.667
  7. Shigley, J. E. and Mischke, C. R., 1998, Mechanical engineering design, Mc Graw-Hill, Inc., New York
  8. Wileman J., Choudhury M. and Green I., 1991, 'Computation of member stiffness in Bolted Connections,' Trans. ASME, J. Mech. Design, Vol. 113,pp.423-437
  9. Merovitch, L., 1967, Analytical Methods in Vibration, The Macmillan Company, New York
  10. Hong, S.-J., Yoo, J.H., Kim, Y.Y., Lee, D. J. and Lee, S. W., 2004,'The Modeling Method of Bolted-Joints with Linear Spring Considering Dynamic Characteristics,' The 3^rd International conference on Advances in Structural Engineering and Mechanics, pp. 1514-1525
  11. Hong, S.-J., Yoo, J. H., Kim, Y.Y., Lee, D.J. and Lee, S. W., 2004 'The Dynamic Characteristics of Bolt Jointed Plates Using the Finite Element Method,' Trans. of KSNVE. Vol. 14. No. 10, pp.990-998 https://doi.org/10.5050/KSNVN.2004.14.10.990