Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지

The Effect of Shot Peening on Corrosive Behavior of SAE 5155 in $3.5\%$ NaCl Solution

$3.5\%$ NaCl수용액에서 SAE 5155의 부식거동에 미치는 쇼트피닝의 영향

  • 안재필 (부경대학교 기계공학부 대학원) ;
  • 박경동 (부경대학교 기계공학부)
  • Published : 2005.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study. investigated the effect of shot peening on the corrosion of SAE 5155 steel immersed in $3.5\%$ NaCl solution and corrosion characteristics by the heat treatment during shot peening process. The immersion test was Performed on the four kinds of specimens. Corrosion Potential, polarization curve, residual stress etc. were investigated from experimental results. From these test results, the effect of shot peening on the corrosion was evaluated The important results of the experimental study on the effects of shot peened SAE 5155 on the corrosion are as follows; Shot peened specimens show the low of corrosion current as compared with un peened specimens. In the case of corrosion potential, shot Peened specimen shows more negative Potential as compared with that of parent metal Surface of specimen, which is treated with shot peening Process. is Placed as more activated state against inner parent metal. Corrosion rate is shown that shot Peened specimens have less corrode than un peened specimens. But non heat treated shot peened specimens show the biggest weight loss owing to variable compressive residual stress layer by shot ball.

Keywords

References

  1. 박경동, 정찬기, 'DIN50CrV4-SAE9254강의 피로강도에 미치는 압축잔류응력의 영향', 한국해양공학회지, 제15권, 제3호, pp. 93-99, 2001
  2. W. F. Brown, and J. E. Strawley, 'Plane Crack Toughness Testing of High Strength Metallic Materials'. ASTM STP 410, pp. 92-98. 1996
  3. 정성균, 이승호, 정석주, '쇼트피닝 가공조건이 피닝강도에 미치는 영향,' 대한기계학회지, 제25권, 제10호, pp.1590-1596, 2001
  4. ASTM, 'Standard Test Method for Determining The Effective Elastic Parameter for X-ray Diffraction Measurement of Residual Stress' ASTM E 1426-94, pp.932-935. 1994
  5. ASTM, 'Standard Test Method for Verifying The Alignment of X-ray Diffraction Instrumentation for Residual Stress Measurement,' ASTME 915-90, pp.691-693, 1990
  6. D. A. Jones, Principles and Prevention of Corrosion, 2nd Edition, Prentice Hall Company, New Jersey. pp.31-34. 1995
  7. 임우조, 양학회, 인현만, 이진열, 부식과 방식, 원창출판사, pp.133-137, 1996
  8. M. G. Fontana, Corrosion Engineering, 3rd Edition, McGraw-Hill Book Company, New York. pp. 320-340. 1986