Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Vibration Analysis of Flexible Rotor Having a Breathing Crack

개폐균열이 존재하는 유연 회전체의 진동해석

  • 전오성 (전주대학교 기계자동차공학과)
  • Published : 2005.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The dynamic response due to the unbalance and crack and the quasi-static response due to gravity are analytically derived based on the complex transfer matrix. The additional slope is expressed as function of the bending moment at crack position based on the fracture mechanics concept, and inversely the bending moment is expressed as function of the additional slope at the crack Position. At each angle step during the shaft revolution, the additional slope and bending moment are calculated by an iterativemethod. The transient behavior is considered by introducing Fourier series expansion concept for the additional slope. Simulation is carried out for a simple rotor similar to those available in the literature and comparison of the basic crack behavior is shown. Using the additional slope, the cracked rotor behavior is explained with the crack depth increased: the magnitude of the additional slope increases and the closed crack duration during a revolution decreases as the crack depth increases. The direction of unbalance is also shown as a factor to affect the crack breathing. Whirl orbits are shown near the sub-critical speed ranges of the rotor.

Keywords

References

  1. Dimarogonas, A. D. and Paipetis, S.A., 1983, Analytical Methods in Rotor Dynamics, London: Applied Science Publishers Ltd, Chapter 6
  2. Dimarogonas, A. D. and Papadopoulos, C. A., 1983, 'Vibration of Cracked Shafts in Bending,' Journal of Sound and Vibration, 91, pp, 583-593 https://doi.org/10.1016/0022-460X(83)90834-9
  3. Choi, S. -H., Hong, S. -W. and Lee C. -W., 2003, 'An Efficient Dynamic Model of General Rotor Systems with Open Cracks,' KSNVE 2003 Spring Conference, pp. 88-93
  4. Jun, O. S., Eun, H. J., Earmme, Y. Y. and Lee, C. -W., 1992, 'Modelling and Vibration Analysis of a Simple Rotor with a Breathing Crack,' Journal of Sound and Vibration, 155(2), 273-290 https://doi.org/10.1016/0022-460X(92)90511-U
  5. Prohl, M. A., 1945, 'A General Method for Calculating Critical Speeds of Flexible Rotors,' ASME Journal of Applied Mechanics, 67, A-142-A-148
  6. Lund, J. W., 1974, 'Stability and Damped Critical Speeds of a Flexible Rotor in Fluid-film Bearings,' ASME Journal for Engineering for Industry, pp. 509-517
  7. Rao, J. S., 1996, Rotor Dynamics, 3rded., New Age International Ltd., Chapter 8
  8. Jun, O. S., 2004, 'Influence Coefficients on Rotor Having Thick Shaft Elements and Resilient Bearings,' Journal of Sound and Vibration, 272, pp. 657-673 https://doi.org/10.1016/S0022-460X(03)00393-6
  9. Tada, H., Paris, P. C. and Irwin, G. R., 2000, The Stress Analysis of Cracks Handbook, 3rd ed., ASME Press
  10. Lee, C. -W., 1993, Vibration Analysis of Rotors, Kluwer Academic Publishers, The Netherlands, Chapter 8