Abstract
Precise orbit determination of satellite is essential process for broad utilization of satellite imagery. The errors of satellite orbit make significant distortions to the result of geometric correction and DEM (Digital Elevation Model) generated by radargrammetry. If accurate ephemeris data from header information of satellite image are available, precise satellite orbit can be determined without control points. If not, satellite orbit must be refined by using the well defined control points. For orbit refinement, the acquisition of sufficient control points is the most tedious and time consuming step and obstacle to near realtime applications, especially for SAR(Synthetic Aperture Radar) imagery. This paper describes orbit refinement method using only a single control point and ephemeris data to resolve the problem and applies the proposed method to RADARSAT-1 images of which ephemeris information is not accurate to directly use for accurate geometric modeling. Geocoding and generation of DEM is performed using the refined orbit by a single control point. For the comparative analysis of accuracy, traditional method using many control points is performed. As a result, the satellite orbit parameters of RADARSAT-1 SAR were accurately determined by only the single control point.
정확한 위성의 궤도를 결정하는 것은 위성영상의 처리에 있어 매우 중요한 과정이다. 위성 궤도가 정확하지 않으면 기하보정이나 3차원 위치결정 시 많은 오차가 발생한다. 만약 영상의 헤더정보에서 정확한 천체력 자료를 제공한다면 기준점 없이 정확한 위성궤도를 결정할 수 있다. 그러나 제공되는 천체력 자료가 부정확하면 잘 분포된 다수의 기준점을 이용하여 궤도를 보정해야 한다. 위성궤도의 보정을 위해서 잘 분포된 다수의 정확한 기준점을 취득하는 일은 SAR 영상의 처리에 있어 광학영상에 비해 어려울 뿐만 아니라 시간과 비용이 많이 소모되는 작업이다. 본 연구에서는 이러한 문제점을 해결하기 위해서 단일 기준점 위성궤도 보정기법을 제시하였고, 제시된 기법을 비교적 천체력 자료가 정확하지 못한 RADARSAT-1 SAR 영상에 적용하였다. 정확도 분석을 위해서 단일 기준점으로부터 보정된 위성궤도 파라미터를 이용하여 기하보정 및 수치고도모형을 생성하고, 그 결과를 기존의 방법인 다수의 기준점을 이용한 결과와 비교하였다. 정확도를 분석한 결과 단일 기준점만으로도 정확한 RADARSAT-1 SAR의 위성궤도 파라미터가 결정될 수 있음을 알 수 있었다.