Application of Phase-shifting Method using fourier Transform to Measurement of In-plane Displacement by Speckle Interferometry

  • Kim, Myung-Soo (School of Electronics and Information Engineering, Kunsan National University) ;
  • Baek, Tae-Hyun (School of Mechanical Engineering, Kunsan National University) ;
  • Morimoto, Yoshiharu (Department of Opto-Mechatronics, Faculty of System Engineering, Wakayama University) ;
  • Fujigaki, Motoharu (Department of Opto-Mechatronics, Faculty of System Engineering, Wakayama University)
  • Published : 2005.06.30

Abstract

Phase-shifting method using Fourier transform (PSM/FT) has been applied to measurement of in-plane displacement of a specimen. Thirty-two interference fringe patterns each of which has different phase of ${\pi}/16$ radian have been gathered from a specimen with in-plane displacement. Low-pass filtering by 2-D Fourier transform is used to suppress spatial noise of the fringe patterns. ${\alpha}-directional$ Fourier transform for PSM/FT is performed by use of the low-pass filtered 32 fringe patterns. Two kinds of specimens are used for experiment. One is a rectangular steel plate and the other one is a rectangular steel plate containing a circular hole at the center. In-plane displacement of each specimen is measured by PSM/FT, and calculated by finite element method (ANSYS) for comparison. The results are quite comparable, so that PSM/FT can be applied to measurement of in-plane displacement.

Keywords

References

  1. Proceedings of the Symposium, Novel Applications of Experimental Methods in Mechanics Application of ESPI to Measurement of Out-of-plane Displacement in a Spot Welded Cantilevered Plate Baek, T.H.;Kim, M.S.;Na, E.G.;Koh, S.K.
  2. Optical Methods of Engineering Analysis Cloud, G.L.
  3. Applied Optics v.24 no.18 Phase-shifting speckle interferometry Creath, K. https://doi.org/10.1364/AO.24.003053
  4. Laser Speckle and Related Phenomena Dainty, J.C.
  5. Experimental Stress Analysis Dally, J.W.;Riley, W.F.
  6. Optical Engineering v.27 no.3 Application of moire analysis of strain by Fourier transform Morimoto, Y.;Seguchi, Y.;Higashi, T.
  7. Optical Engineering v.33 no.11 Fringe pattern analysis by a phase-shifting method using Fourier transform Morimoto, Y.;Fujisawa, M. https://doi.org/10.1117/12.181923
  8. Experimental Mechanics v.38 no.1 Whole-field strain measurement in a pin-loaded plate by electronic speckle pattern interferometry and finite element method Scalea, F.L.;Hong, S.S.;Cloud, G.L. https://doi.org/10.1007/BF02321268