Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Cutting Characteristics of Dry Turning Using Compressed Air

압축공기를 이용한 건식 선삭가공의 절삭특성

  • 송춘삼 (국민대학교 자동차공학전문대학원) ;
  • 김주현 (국민대학교 기계자동차공학부)
  • Published : 2005.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

The purposes of using cutting fluid during cutting have been cooling, lubricating, chip washing, and anti-corroding. However, the present manufacturing industry restricts the use of cutting fluid because cutting fluid contains poisonous substances which are harmful to the human body. Therefore dry cutting becomes an unavoidable assignment and a lot of researches have studied cutting methods without using cutting fluid. Because dry turning is a continuous work, tools life is reduced by continuous heat generation and surface gets rough due to reduced lubrication, so it is important to consider these situations. In this paper, the way of selecting the optimal machining condition by the minimum number of experiments and the effectiveness of using compressed air in high hardness materials through Taguchi method have been found. Dry cutting using compressed air showed better cutting characteristics than normal dry cutting with respect to by cutting force, tool wear, and surface roughness. Also, the optimal machining condition f3r dry cutting using compressed air could be selected through Taguchi method.

Keywords

References

  1. Aronson, R. B., 1994, 'Why Dry Machining', Manufacturing Engineering, Vol. 114, pp. 33-36
  2. National Institute for Occupational Safety and Health, February 1998, Criteria for a Recommended Standard Occupational Exposures to Metalworking Fluids, US. Dept. of Health and Human Services, CDC. NIOSH
  3. Klocke, F., and Eisenblatter, G., 1997, 'Dry cutting', Keynote papers, Annals of CIRP, Vol. 46, No. 2, pp. 519-526
  4. Cselle, T., 1995, 'New Directions in Drilling', Manufacturing Engineering, Vol. 115, No. 2, pp. 77-80
  5. Koelsch, J. R., 1997, 'Lubricity VS. the Environment: Cascades of Cleaniness', Manufacturing Engineering, Vol. 118, No. 5, pp. 50-58
  6. Jin, M., Noguchi, H., and Murakawa, M., 2001, 'Environmentally friendly dry cutting using heat absorption tool', Transactions of NAMRI/SME, Vol. 29, pp. 235-242
  7. Hafenbraedl, D., and Malkin, S., 2000, 'Environmentally- conscious minimun quantity lubrication(MQL) for internal cylinderical grinding', Transaction of NAMRI/SME, Vol. 28, pp. 149-154
  8. El-Wardany, T. I., Mohammed, E., and Elbestawi, M.A., 1996, 'Cutting Temperature of Ceramic Tools in High Speed Machining of Difficult-to-cut Materials', Int. J. Mach. Tools Manufact, Vol. 36, No. 5, pp. 611-634 https://doi.org/10.1016/0890-6955(95)00043-7
  9. Kim, S. W., Ahn, C. S., and Lee, D. W., 2000, 'Evaluation of Machinability by Cutting Environments in High-Speed Machining of Difficult-to-cut Materials', Journal of the Korean Society of Machine Tool Engineers, Vol. 9, No. 6, pp. 158-163
  10. Kitagawa, T., Kubo, A., and Meakawa, K., 1997, 'Temperature and wear of cutting tools in high-speed machining of Inconel718 and Ti-6Al-6V-2Sn', Wear , Vol. 202, pp. 142-148 https://doi.org/10.1016/S0043-1648(96)07255-9