Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on the Optimum Shape of Rope Brake

로프 브레이크의 최적형상에 관한 연구

  • 이종선 (대진대학교 기계설계공학과)
  • Published : 2005.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

The objective of this study is structural analysis and optimum shape of rope brake. The finite element model was implemented to compute the stress, strain and friction force for rope brake. The ANSYS code was used for this analysis. Structural analysis are effected by position and height of reinforcement figure. The structural safety was examined by an establishment angle of the rope brakes which made apply to housing of the most suitable shape. The optimum shape of the rope brake was decided after stress and strain results were compared and examined.

Keywords

References

  1. Korea Machinery Meter and Petrochemical Testing and Research Institute, 1999, A Study on the Technical Safety Rules of Rope Brake use for Elevator , pp. 1-67
  2. Vlahovic, C. E., 1989, Rationale for New Rules in CSAB44 Safety Code for Elevators, Elevator World
  3. Nederbragt, J. A., 1989, Rope Brake, Elevator World
  4. Chandrupatla, T. R., and Belegundu, A. D., 1991, Introduction to Finite Elements in Engineering, Prentice Hall
  5. Weaver, Jr. W., and Johnston, R., 1993, Finite Elements for Structural Analysis, Prentice Hall
  6. ANSYS User's Manual Revision 7.0, 2000, Swanson Analysis System, Inc
  7. Lee, J. S., Kim, J. H., and Bag, I. J., 2003, 'Structural Analysis of Rope Brake for Elevator,' Proceedings of the KSMTE fall conf. 2003, pp. 9-13
  8. Kim, H. G., Yang, S. M., Noh, H. G, Nah, S. C., You, K. H., and Cho, N. I., 2003, 'A Study on the Optimal Shape Design of 2-D structures,' Journal of the Korean Society of Machine Tool Engineers, Vol. 12, No. 2, pp. 9-16