Journal of Biosystems Engineering

Korean Society for Agricultural Machinery (한국농업기계학회)
권호 표지
DOI QR코드

DOI QR Code

Extrusion-cooking Using Twin-screw Extruder on Cordyceps Pruinosa

이축 압출 성형기를 이용한 붉은자루 동충하초의 압출 성형

  • Kim D. E. (Graduate Student, Biological System Engineering, Kangwon National University) ;
  • Sung J. M. (Div. of Environmental Biology, Kangwon National University) ;
  • Kang W. S. (Biological System Engineering, Kangwon National University)
  • Published : 2005.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

The extrusion-cooking condition on Cordyceps pruinosa was designed using twin-screw extruder. Response surface methodology (RSM) was used to investigate extrusion-cooking using a central composition design with varying die temperature $(114-146^{\circ}C)$, feed moisture $(22-38\%)$, feed rate (4-14 ka/h) and screw speed (120-280 rpm). System parameters (die pressure and specific mechanical energy (SME)) and extrudate parameters (density and water solubility index (WSI)) were statically analyzed using RSH. Die pressure was significantly affected by temperature, moisture contents and feed rate. SM was affected by screw speed and feed rate. When die temperature is $130^{\circ}C$ and moisture content $25\%$, the optimum pressure is shown. SME is about 20 Wh/kg, when feed rate is $10\~12kg/min$ and screw speed $200\~250rpm$. WSI was affected by temperature and moisture contents. Density was not affected by any factor. WSI increases by $7\%$ from about $23\%$ to about $30\%$, as temperature is raised from $120^{\circ}C\;to\;140^{\circ}C$. The WSI of Cordyceps pruinosa pulverized after extruding (PE) is about $26.97\%$ higher than that of raw material and $10\%$ higher than that of pulverized after drying (PD). The content of unsaturated fatty acid were not significantly different in PD and PE. Anti-oxidative activity of PE was 1.67-2.2 times higher than that of PD in Cordyceps pruinosa using 1- dipheny1-2-picrylhydrazyl method (DPPH).

Keywords

References

  1. 강위수, 김태웅, 김호경, 성재모, 양기숙. 2004. '붉은자루 동충하초 생리활성 및 산업화 연구에 관한 연구' 최종 연구보고서. 농촌진흥청. pp. 128-129
  2. 김동은, 성재모, 김태웅, 심태흠, 양승기, 강위수. 2003. 동방향 이축 압출 성형기를 이용한 붉은자루 통충하초 가공 연구. 강원대학교 농업과학연구소 논문집. 제 14호 49-58
  3. 김종태, 황재관, 조성자, 김철진, 김해성. 1996. 스크류 조합과 공정변수 조절에 따른 밀기울 압출물의 특성. 한국 식품과학회지, Vol. 28, No. 1
  4. 김지용, 김종태, 김철진 1991. 옥분 압출 가공시 이축압출성형기의 System Parameters에 따른 압출물의 특성변화. 한국식품과학회지, Vol. 23. No. 1
  5. 류기형, S.J Mulvaney. 1997. 탄산가스 주입에 의한 유제품 강화 옥수수 압출성형물의 성질과 기계적 에너지 투입량의 분석. 한국식품과학회지, Vol. 29, No. 5, pp. 947-954
  6. 신재철. 2003. 붉은자루 동충하초의 배양적 특생 및 인공 자실체 형성에 관한 논문. 강원대학교 대학원 석사학위 논문
  7. 신해헌, 박보선, 이혜림, 최문정, 황재관. 2001. 반응표면분석법에 의한 전곡립의 압출성형공정 분석, 한국식품과학회지, Vol. 33, No. 6, pp. 686-692
  8. 성내경. 2000. SAS/STAT 회기분석 제 2판. 자유아카데미
  9. 성재모, 이현경, 유영진, 최영상, 김상희, 김용옥, 성기호. 1998. 단백질 분석을 기초로 한 Cordyceps속 동충하초의 분류. 한국 균학회, Vol. 26, No. 1
  10. 성재모. 1999. 동충하초의 생태와 분류. 한국 균학회
  11. 이기동, 이정은, 권중호. 2000. 식품공업에서 반응 표면분석의 응용. 식품과학과 산업, Vol. 33, No. 1
  12. 오세욱, 김선희, 송효남, 한대석. 2003. 동충하초 품종별 영양 성분 비교. 한국식품과학회지, Vol. 35. No. 1
  13. 황재관, 김종태, 홍석인, 김철진. 1994. 압출성형에 의한 식물 세포벽의 수용화. 한국영양식량학회지, 23(2), 358-370
  14. Anderson, R.A., Conway, H. F., Pfeifer, V. F. & Griffin Jr., E. J. 1969. Gelatinization of corn grits by roll and extrusion cooking. Cereal Sci. Today 14
  15. Binoy K. Gogoi, Gour S. Choudhury & Aaron J. Oswalt, 1996, Effect of location and spacing of reverse screw and kneading element combination during twin-screw extrusion of starchy and proteinaceous blends. Food Research International. Vol. 29, Nos 5-6, 505-512 https://doi.org/10.1016/S0963-9969(96)00051-8
  16. G. Sacchetti, G.G. Pinnavaia, E. Guidolin, M. Dalla Rosa. 2004. Effects of extrusion temperature and feed composition on the functional, physical and sensory properties of chestnut and rice flour-based snack-like products. Food Research International 37, 527-534 https://doi.org/10.1016/j.foodres.2003.11.009
  17. C. Mercier, P. Linko, Harper, J.M., 1989. Extrusion Cooking. American Association of Cereal Chemists, Inc., pp. 1-16
  18. Junjie Guan, Milford A. Hanna. 2003. Functional properties of extruded foam composites of starch acetate and corn cob fiber. Industrial crops and products, 1-15 https://doi.org/10.1016/j.indcrop.2003.10.007
  19. Narpinder Singh, Andrew C. Smith. 1997. A comparison of wheat starch, whole wheat wheat meal and oat flour in the extrusion cooking process. 1997. Journal of Food Engineering 34, 15-32 https://doi.org/10.1016/S0260-8774(97)00069-1
  20. Suvendu Bhattacharya. 1997. Twin-Extrusion of Rice-Green Gram Blend: Extrusion and Extrudate Characteristics. Journal of Food Engineering 32, 83-99 https://doi.org/10.1016/S0260-8774(97)00004-6
  21. Suvendu Bhattacharya, M.L. Sudha, A. Rahim. 1997. Pasting characteristics of an extruded blend of potato and wheat flours. Journal of Food Engineering 40, 107-111 https://doi.org/10.1016/S0260-8774(99)00046-1
  22. S. Ilo, Y. Liu, and E. Berghofer. 1999. Extrusion Cooking of Rice Flour and Amaranth Blends. Lebensm.-Wiss. u-Technol., 32, 79-88 https://doi.org/10.1006/fstl.1998.0497
  23. Qing-Bo Ding, Paul Ainsworth, Gregory Tucker, Hayley Marson. 2004. The effect of extrusion conditions on the physicochemical properties and sensory characteristics of rice-based expanded snacks. Journal of Food Engineering https://doi.org/10.1016/j.jfoodeng.2004.03.019
  24. Thava Vasanthan, Jiang Gaosong, Judy Yeung, Jihong Li. 2002. Dietary fiber profile of barley flour as affected by extrusion cooking. Food Chemistry, 77 Page 35-40 https://doi.org/10.1016/S0308-8146(01)00318-1
  25. V.D. Miladinov, M.A. Hanna, 2000, Starch esterification by reactive extrusion, Industrial Crops and Products 11 51-57 https://doi.org/10.1016/S0926-6690(99)00033-3

Cited by

  1. Pelletizing Performance of Food Waste Compost by An Extrusion Process vol.35, pp.5, 2010, https://doi.org/10.5307/JBE.2010.35.5.336