A Study on Electrodewatering Filter Press Technology for Improvement of Dewarterability of Waterworks Sludge

정수슬러지 탈수효율 향상을 위한 전기필터프레스탈수에 관한 연구

  • 이정언 (부산대학교 산학협력중심대학) ;
  • 이재근 (부산대학교 기계공학부)
  • Published : 2006.10.31

Abstract

The elcetrodewatering filter press(EDFP) which had anode and cathod plates to be set between filter plates was built for reducing the waterworks sludge and improving performance of dewatering equipment. Several tests to compare the dewaterability with conventional mechanical filter press dewatering(MDEP) and EDFP was conducted through this equipment. As test results, filtration amount discharged from EDFP measured 43.2 kg which increased against MDFP, and cake weight measured 4 kg which was two times against MDFP. The water content of dewatered cake from EDFP was 55wt% and dewatering velocity was 2.3 $kg/m^2{\cdot}cycle$. This water content decrease 20% and dewatering velocity increased 30% with compare to the MDFP. That is to say, EDFP constructed from electrodewatering mechanism increase filtrate discharging amount, which make dewatering velocity increase and produce the low water content dewatered cake against MDFP. Energy consumption of EDFP is analysed to 400 kwh/DS ton. The results to analysis the economical aspect considering the power consumption and the handling cost decline as sludge volume reduction due to producing the low water content cake showed that expenses to handle sludge of 1 ton by dry solid base cut down on 20,000 won. If considering several test aspects, it was analysed that EDFP was excellent in the side of performance as well as economical suitability.

정수 슬러지의 감량화와 탈수장치의 성능향상을 위하여 필터프레스 탈수장치의 각 Plate 사이에 음극판과 양극판을 설치하여 케이크 층에 전기장을 투입하는 전기식 필터프레스 탈수장치(EDFP)를 구축하여 기존의 기계식 필터프레스 탈수장치(MDEF)와의 탈수성 비교, 그리고 EDFP의 탈수성 향상에 따른 경제적인 측면 등을 분석하였다. 동일조건에서 탈수실험을 수행한 결과 EDFP를 통해 배출된 여액량은 43.2 kg으로 MDFP에 비하여 증가하였으며, 케이크 무게는 4 kg으로 MDFP에 비해 2배 증가하였고 탈수 케이크의 함수율은 55 wt%로 MDFP에 비하여 약 20% 감소하였으며 탈수속도는 2.3 $kg/m^2{\cdot}cycle$로 약 30% 증가하였다. 즉 전기탈수(Electrodewatering)의 원리로 구축된 EDFP는 기계탈수(Mechanical Dewatering)에 의한 MDFP 비하여 여액배출량을 증가시키고 저함수율 탈수 케이크를 생산하며 탈수속도를 증가시키는 특성이 있다. EDFP의 소모된 전력량은 400 kwh/DS ton으로, 투입된 전력량과 저함수율 탈수 케이크 생산에 따른 부피 감소로 인한 처리경비 저하의 효과를 서로 고려하여 경제성을 분석한 결과 1 ton(Dry Solid base) 처리하는데 약 20,000원 경제적 절감 효과가 있었다. 이 외 탈수속도가 빨라진 부가적 이점을 감안하면, EDFP는 탈수 성능 면에서 우수할 뿐만 아니라 경제적 타당성이 있는 장치로 평가할 수 있다.

Keywords

References

  1. 이정언, '정수슬러지의 특성이 탈수성능에 미치는 영향,' 대한환경공학회지, 25(8), 1059-1066(2003)
  2. Lockhart, N. C., 'Electro-osmotic Dewatering of Fine Tailings from Mineral Processing,' International Journal of Mineral Processing, 10, 141-160(1983) https://doi.org/10.1016/0301-7516(83)90039-X
  3. Ju, S., Weber, M. E., and Mujumdar, A. S., 'Electroosmotic Dewatering of Bentonite Suspension,' Separations Technology, 1, pp. 214-221(1991) https://doi.org/10.1016/0956-9618(91)80016-S
  4. Orsat, V., Raghavan, G. S. V., Sotocinal, S., Lightfoot, D. G., and Gopalakrishnan, S., 'Roller Press for Electroosmotic Dewatering of Bio-Materials,' Drying Technology, 17(3), 523-538(1999) https://doi.org/10.1080/07373939908917549
  5. Barton, W. A., Miller, S. A., and Veal, C. J., 'The Electrodewatering of Sewage Sludge,' Drying Technology, 17(3), 497 - 522(2000)
  6. Ruth, B. F., 'Studies in filtration, III derivation of general filtration equation,' Ind. Eng. Chem., 27, 708-723 (1935) https://doi.org/10.1021/ie50306a024
  7. 이정언, '혼합 슬러지의 탈수성에 관한 연구,' 대한환경공학회지, 26(8), 925 -932(2004)
  8. Vijh, A. K., 'Electroosmotic Dewatering(EOD) of Clays and Suspensions: Components of Voltage in an Elecroos-motic Cell,' Drying Technology, 17(3), 565-574(1999) https://doi.org/10.1080/07373939908917552