Food Science and Biotechnology

Korean Society of Food Science and Technology (한국식품과학회)
권호 표지

Assessment and Applications of Multi-Degradable Polyethylene Films as Packaging Materials

  • Published : 2006.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

Degradation performance of environmentally friendly plastics that can be disintegrated by combination of sunlight, microbes in soil, and heat produced in landfills was evaluated for use in industries. Two multi-degradable master batches (MCC-101 and MCC-102 were manufactured, separately mixed with polyethylene using film molding machine to produce 0.025 mm thick films, and exposed to sunlight, microbes, and heat. Low- and high-density polyethylene (LDPE and HDPE) films containing MCC-101 and MCC-102 became unfunctional by increasing severe cleavage at the surface and showed high reduction in elongation after 40 days of exposure to ultraviolet light. LDPE and HDPE films showed significant physical degradation after 100 and 120 days, respectively, of incubation at $68{\pm}2^{\circ}C$. SEM images of films cultured in mixed mold spore suspension at $30^{\circ}C$ and 85% humidity for 30 days revealed accelerated biodegradation on film surfaces by the action of microbes. LDPE films containing MCC-l01 showed absorption of carbonyls, photo-sensitive sites, at $1710\;cm${-1}$ when exposed to light for 40 days, whereas those not exposed to ultraviolet light showed no absorption at the same frequency. MCC-101-based LDPE films showed much lower $M_w$ distribution after exposure to UV than its counterpart, due to agents accelerating photo-degradation contained in MCC-101.

Keywords

References

  1. Guillet JE. Polymers and Ecological Problems. Plenum Press, New York, NY, USA. pp. 45-60 (1973)
  2. Brown DT. Plastic Waste Management. Marcel Dekker Inc., New York, NY, USA. pp. 1-35 (1993)
  3. Garcia C, Hernandes T, Costa F. Comparison of humic acids derived from city refuse with more developed humic acids. Soil Sci. Plant Nutr. 38: 339-346 (1992) https://doi.org/10.1080/00380768.1992.10416498
  4. Narayan R. Impact of governmental policies, regulations, standards activities on an emerging biodegradable plastics industry. pp. 261-272. In: Biodegradable Plastics and Polymers. Doi Y, Fukuda K (eds). Osaka, Japan (1993)
  5. Huag JH, Shetty AS, Wang MS. Biodegradable plastics, A review. Adv. In Polym. Technol. 10: 23-30 (1990) https://doi.org/10.1002/adv.1990.060100103
  6. Bloembergen S, David J, Geyer D, Gustafson A, Snook J, Narayan R. Biodegradation and composting studies of polymeric materials. pp. 601-609. In: Biodegradable Plastics and Polymers. Doi Y, Fukuda K. (eds). Osaka, Japan (1993)
  7. Doane WM. USDA research on starch-based biodegradable plastics. Starch. 44: 292-295 (1992)
  8. Scott G. Photo-biodegradable plastics: their role in the protection of the environment. Polymer Deg. Stabil. 29: 136-143 (1990)
  9. Albertsson AC, Barenstedt C, Karlsson S. Susceptibility of enhanced environmentally degradable polyethylene to thermal and photo-oxidation. Polymer Deg. Stabil. 37: 163-168 (1992) https://doi.org/10.1016/0141-3910(92)90080-O
  10. Lee SI, Sur SH., Hong KM, Shin YS, Jang SH, Shin BY. A study on the properties of fully bio-photodegradable composite film. J. Int. Ind. Technol. 29: 129-134 (2001)
  11. Shin BY, Lee HB, Cho MH. Photodegradation of HDPE film containing mechanically induced photosensitive groups. Environ. Res. 15: 31-40 (1995)
  12. Korea Food and Drug Administration. Test method for plastics. Chapter 6. Standards for containers and packaging. pp. 28-60. In: Food Code, Seoul, Korea (2001)
  13. ASTM D3826-98. Standard practice for determining degradation end point in degradable polyethylene and polypropylene using a tensile test. American Society of Testing and Materials, Philadelphia, PA, USA (1998)
  14. ASTM 021-96. Standard practice for determining resistance of synthetic polymeric materials to fungi. Annual book of ASTM standards. American Society of Testing and Materials, Philadelphia, PA, USA (1996)
  15. Jitendra KP, Singh RP. UV-irradiated biodegradability of ethylenepropylene copolymers, LDPE, and I-PP in composting and culture environments. Biomacromolecules 2: 880-885 (2001) https://doi.org/10.1021/bm010047s
  16. Shin BY, Jang SH, Jung BW. A study on the photo-biodegradable film containing calcium carbonate, starch and crab shell. J. Int. Ind. Technol. 25: 103-119 (1997)
  17. Hamid SG., Maadhah AG, Amin MB. Handbook of Polymer Degradation. Marcel Dekker Inc., New York, NY, USA. pp. 219-230 (1992)
  18. Willet J. Mechanical properties of LDPE/granular starch composites. J. Appl. Polym. Sci. 54: 1685-1695 (1994) https://doi.org/10.1002/app.1994.070541112
  19. Iring M, Tudos F. Thermal oxidation of polyethylene and polypropylene: Effects of chemical structure and reaction conditions on the oxidation process. Prog. Polym. Sci. 15: 217 (1990)
  20. Nakasuka S, Andrady AL. Thermo-gravimetric determination of starch content in starch-polyethylene blend films. J. Appl. Polym. Sci. 45: 1881-1887 (1992) https://doi.org/10.1002/app.1992.070451102
  21. Jung BW, Shin CH, Kim YJ, Jang SH, Shin BY. A study on the biodegradability of plastic films under controlled composting conditions. J. Int. Ind. Technol. 27: 107-116 (1999)
  22. Ryu KE, Kim YB. Biodegradation of polymers. Polym. Sci. Technol. 9: 464-472 (1998)
  23. Koenig MF, Huang SJ. Biodegradable blends and composites of polycapolactone and starch derivatives. Polymer 36: 1877-1882 (1995) https://doi.org/10.1016/0032-3861(95)90934-T
  24. Na K, Shin EK, Kim YE, Kim DW, Lee KY. Preparation of biodegradable film using polysaccharides. J. Res. Int. Catalysis 20: 117-123 (1998)
  25. Cole MA. Agricultural and Synthetic Polymers. Glass E. and Swift G. (eds). American Chemical Society, Washington, DC, USA. pp. 76-90 (1988)
  26. Chung MS, Lee WH, You YS, Kim HY, Park KM. Degradability of multi-degradable HDPE and LDPE food packaging films. Food Sci. Biotechnol. 12: 548-553 (2003)
  27. Chung MS, Lee WH, You YS, Kim HY, Park KM. Manufacturing muti-degradable food packaging films and their degradability. Korean J. Food Sci. Technol. 35: 877-883 (2003)
  28. Schnabel W. Polymer Degradation: Principles and Practical Applications. Hanser Publishers, Cincinnati, OH, USA (1981)