Abstract

The purpose of this study is to find the proper width of fabric which can bring high efficiency on productivity. We focus on the marking method by comparing and analyzing the marking efficiency of flare skirt. This study employs 4 criteria to mark the flare skirt, which are angle, location, width, and direction, respectively. There can be 3 different angles$(180^{\circ},\;270^{\circ},\;360^{\circ})$, and 2 different locations(the center line and the middle of the pattern) according to fixing of the warp line of the fabric. Also, width can be classified into 2 groups(110cm, 150cm), and marking direction can be grouped into 2(one direction marker and one direction per each size marker). These 4 criteria make $24(3{\times}2{\times}2{\times}2)$ cases for this study. Main findings are follows. Fist, the skirt with the 150cm width has higher efficiency rate than that of 110cm. Second, fixing the warp line at the center line has higher efficiency rate than that in the middle. Finally, per size marker has much higher efficiency than the just direction marker. In sum, we find that 150cm width with the center warp line and per size marker brings the highest efficiency rate.

Keywords

• flare skirt;
• marker;
• marking efficiency;
• CAD system

• 플레어 스커트;
• 마커;
• 마킹 효율;
• 캐드 시스템;