Korean Journal of Air-Conditioning and Refrigeration Engineering (설비공학논문집)

The Society of Air-Conditioning and Refrigerating Engineers of Korea (대한설비공학회)
권호 표지

Experimental Study on the Characteristics of the Heat Transfer and the Pressure Drop inside the Small Diameter Tube with the Heat Transfer Enhancing Geometry

소구경 전열관 내의 열전달촉진 형상변화에 따른 열전달 및 압력강하 특성에 관한 실험적 연구

  • Park Chan-Woo (Dept. of Computer Based Applied Mechanical Engineering, Iksan National College) ;
  • Chin Sung-Min (Environment & Process Technology Division, Korea Institute of Science & Technology) ;
  • Jurng Jong-Soo (Environment & Process Technology Division, Korea Institute of Science & Technology)
  • 박찬우 (익산대학 컴퓨터응용기계과) ;
  • 진성민 (한국과학기술연구원 환경공정연구부) ;
  • 정종수 (한국과학기술연구원 환경공정연구부)
  • Published : 2006.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

Friction and heat transfer coefficients were measured inside the corrugated tube using water as the working fluid. The test is performed for 16 tubes which outer diameter of tubes are 12.7 mm. These specifications are 4 indentation depths and 4 indentation pitches, respectively. The range of the water velocity inside the tube is from 0.5 to 3.0 m/s (8,500

Keywords

References

  1. Vicente, P. G., Garcia, A. and Viedma, A., 2004, Mixed convection heat transfer and iso thermal pressure drop in corrugated tubes for laminar and transition flow, Int. Comm. Heat Mass Transfer, Vol. 31, No.5, pp. 651-662 https://doi.org/10.1016/S0735-1933(04)00052-1
  2. Vicente, P. G., Garcia, A and Viedrna, A, 2004, Experimental investigation on heat transfer and frictional characteristics of spirally corrugated tubes in turbulent flow at different Prandtl numbers, International Journal of Heat and Mass Transfer, Vol. 47, pp. 671-681 https://doi.org/10.1016/j.ijheatmasstransfer.2003.08.005
  3. Sara, R., 1996, Experimental investigation of the heat transfer and pressure drop augmentation for laminar flow in spirally enhanced tubes, 2nd European Thermal-Sciences and 14th UIT National Heat Transfer Conference, pp.203-208
  4. Ravigururajan, T. S. and Rabas, T. J., 1996, Turbulent flow in . the integrally enhanced tubes, part 2: Analysis and performance comparison, heat transfer engineering, Vol. 17, No.2, pp.30-37 https://doi.org/10.1080/01457639608939871
  5. Yang Dong, Li Huixiong and Chen Tingkuan, 2001, Pressure drop, heat transfer and performance of single-phase turbulent flow in spirally corrugated tubes, Experimental Thermal and Fluid Science, Vol. 24, pp. 131-138 https://doi.org/10.1016/S0894-1777(01)00047-4