Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

The Heating Characteristics of Electric Bare Wire Melted by AC Current

AC 전류에 의해 용융된 나전선의 발열 특성

  • 송길목 (전기안전연구원 전기재해연구그룹) ;
  • 최충석 (전기안전연구원 전기재해연구그룹) ;
  • 김향곤 (전기안전연구원 전기재해연구그룹) ;
  • 김영석 (전기안전연구원 전기재해연구그룹)
  • Published : 2006.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

For a fire cause judgement this paper describes the heating characteristics of electric bare wire melted by AC current. The cower wires prepared for the experiment were 1.2[mm], 1.6[mm], and 2.0[mm] in diameter. Through the cross section analysis(CSA), it was confirmed that the dendrite structure grew at the angle of about 40[$^{\circ}$] or 60[$^{\circ}$] when the fusing current was applied to the wires. The larger the fusing current is, the more decreased the growth angle of the dendrite structure is. It was confirmed that the dendrite structure was arranged like the columnar structure.

이 논문은 화재원인판정에 있어서, 교류전류에 의해 용융된 나전선의 발열특성을 기술한 것이다. 실험을 위해 동전선은 1.2[mm], 1.6[mm], 2.0[mm]의 직경인 것을 준비하였다. 단면분석을 통해 용단전류가 전선에 공급되었을 때, 수지상 조직은 약40[$^{\circ}$] 또는 60[$^{\circ}$]의 각도로 성장하는 것을 확인하였다. 용단전류가 커지면 커질수록 수지상 조직의 성장각도는 줄어들었다. 그것은 주상조직과 유사하다는 것을 확인하였다.

Keywords

References

  1. Chung-Seog Choi, Kil-Mok Shong, Hyang-Kon Kim, Dong- Ook Kim, Dong-Woo Kim, 'The Analysis of Dendrite Structure of Electric Wire Melted by Fusing Current', 2003J-K Joint Symp. on ED&HVE, pp.145-148, 2003
  2. W.H. Preece, 'On the heating effects of electric currents' , Proc.Royal Soc., vol. 36, pp.464-471, 1884 https://doi.org/10.1098/rspl.1883.0133
  3. John D. DeHaan, 'Kirk's Fire Investigation', 5th edition, Prentice Hall, pp.305, 2002
  4. Kil-Mok Shong, Hyang-Kon Kim, Chung-Seog Choi and Hee-Ro Kwak, 'A Study on the Electrical Fire Analysis of PVC Insulateds Flexible Cord by Over-Current', KIEE 2003spring conference, pp.131-133, 2003
  5. Atila Metrol Member, 'Estimation of Aluminium and Gold Bond Wire Fusing Current and Fusing Time', IEEE Trans. on CP & MT, VOL. 18, NO. 1, pp.210-214, 1995
  6. Babrauskas, V., 'Fires due to Electric Arcing: Can 'Cause' Beads Be Distinguished from 'Victim' Beads by Physical or Chemical Testing?', Fire and Materials, pp.189-201, 2003
  7. 김정근 외 2, '금속현미경 조직학', 도서출판 골드 초판, pp.14-183, 1999
  8. Sheera Knechi, Bill Gonzalez, Kimberley Sieber, 'Fusing Current of Short Aluminum Bond Wire', 1996 InterSociety Conf. on TP, pp.329-333, 1996
  9. William D. Callister, Jr., 'Materials Science and Engineering an Introduction', Wiley 6th edition, pp.594-636, 2003
  10. Eugene Loh, 'Physical Analysis of Data on Fused -Open Bond Wires', IEEE Trans. on CH & MT, VOL. CHMT-6, NO. 2, 1983