DOI QR코드

DOI QR Code

Fatigue Strength Analysis of Pontoon Type VLFS Using Spectral Method

통계해석법에 의한 폰툰식 VLFS의 피로강도해석

  • Park, Seong-Whan (System Engineering Research Division, Horea Institute of Machinery & Materials) ;
  • Han, Jeong-Woo (System Engineering Research Division, Horea Institute of Machinery & Materials) ;
  • Han, Seung-Ho (System Engineering Research Division, Horea Institute of Machinery & Materials) ;
  • Ha, Tae-Bum (Research and Development Center, Korean Register of Shipping) ;
  • Lee, Hong-Gu (Research and Development Center, Korean Register of Shipping) ;
  • Hong, Sa-Young (Maritime and Ocean Engineering Research Institute (MOERI), KORDI) ;
  • Kim, Byoung-Wan (Maritime and Ocean Engineering Research Institute (MOERI), KORDI) ;
  • Kyoung, Jo-Hyun (Maritime and Ocean Engineering Research Institute (MOERI), KORDI)
  • 박성환 (한국기계연구원 시스템엔지니어링연구본부) ;
  • 한정우 (한국기계연구원 시스템엔지니어링연구본부) ;
  • 한승호 (한국기계연구원 시스템엔지니어링연구본부) ;
  • 하태범 (한국선급 기술연구소) ;
  • 이홍구 (한국선급 기술연구소) ;
  • 홍사영 (해양안전시스템연구소 해양시스템개발부) ;
  • 김병완 (해양안전시스템연구소 해양시스템개발부) ;
  • 경조현 (해양안전시스템연구소 해양시스템개발부)
  • Published : 2006.06.20

Abstract

The fatigue strength analysis of VLFS is carried out by using a 3-dimensional plate finite element model with a zooming technology which performs the modeling of wide portions of the structure by a coarse mesh but the concerned parts by a very fine mesh of t by t level. And a stepwise substructure modeling technique for global loading conditions is applied which uses the motion response of the global structure from 2-D plate hydroelastic analysis as the enforcing nodal displacements of the concern 3-D structural zooming model. Seven incident wave angles and whole ranges of frequency domains of wave spectrum are considered. In order to consider the effect of breakwater, the modified JONSWAP wave spectrum is used. Applying the wave data of installation region, the longterm spectrum analysis is done based on stochastic process and the fatigue life of the structure is estimated. Finally some design considerations from the view point of fatigue strength analysis of VLFS are discussed.

Keywords

References

  1. 박성환, 이탁기, 홍사영, 2005, ' 폰툰식 VLFS 의 초기구조설계에 관한 연구,' 대한조선학회 논문집, 제 42 권, 제 6 호, pp. 644-653 https://doi.org/10.3744/SNAK.2005.42.6.644
  2. 이탁기,박성환, 홍사영, 2004, ' 등가판 모델을 이용한 VLFS 하부구조의 구조해석,' 대한조선학회 춘계학술대회 논문집, pp.114-118
  3. 한국선급, 2005, 선급 및 강선규칙 적용지침, Part 3, ' 부록 3-3 선체 피로강도 평가 지침'
  4. 홍사영 등, 2004, 초대형 부유식 해상구조물 기술개발 (6 차년도 보고서), 해앙수산부 언구개발 사업 최종보고서, UCM00690-04099
  5. ANSYS Inc. 2005, ANSYS Release 9.0
  6. Det Norske Veritas, 2001, Fatigue Assessment of Ship Structures, DNV Classification Notes, NO.30.7
  7. Han, S.H., Han, J. and Shin, B.C., 1998, 'Fatigue Strength Estimation and Fatigue Design of Welded Members under Hot-Spot Stress Concept,' Transaction of KSME Vol. A22, No. 11, pp. 2072-2083
  8. Han, S.H. and Shin, B.C., 2000, 'The Use of Hot Spot Stress for Estimating the Fatigue Strength of Welded Components,'' Steel Research 71, No. 11, pp. 466-473 https://doi.org/10.1002/srin.200005716
  9. Kim, B.W., Kyoung, J.H. , Hong, S.Y. and Cho, S.K., 2005, ' Investigation of the Effect of Stiffness Distribution and Structure Shape on Hydroelastic Responses of Very Large Floating Structures ,' Proceedings of 15th International Offshore and Polar Engineering Conference, Seoul, Korea, Vol. 1, pp. 210-217
  10. Shigeru Tozawa, Akinobu Kawamura and Hiroshi Shirakihara, 1996, ' Technical Outline of Structural Design for Mega-Float, ' Inter. Workshop on VLFS, Hayama, Japan , pp. 11-18
  11. Technological Research Association of Mega-Float, 1996-2000, ' The Study Report of Mega-Float in FY 1995-1999, ' (in Japanese)