Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Dynamic Characteristic Analysis of MR Impact Damper for Vehicle System

차량용 MR충격댐퍼의 동특성 해석

  • 송현정 (인하대학교 기계공학부) ;
  • 우다윗 (인하대학교 대학원 기계공학과) ;
  • 최승복 (인하대학교 기계공학부)
  • Published : 2006.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the dynamic characteristics of MR impact damper for vehicle collision system. Various types of mechanism have been proposed to reduce force transmitted to the vehicle chassis and finally to protect occupants from injury. In the case of head-on collision, the bumper makes main role of isolation material for collision attenuation. In this study, the proposed bumper system consists of MR impact damper and structures. The MR impact damper utilizes MR fluid which has reversible properties with applied magnetic field. The MR fluid operates under flow mode. The bellows is used for generation of fluid flow. A mathematical model of the MR impact damper is derived incorporating with Bingham model of the MR fluid. Field dependent damping force is investigated with time and frequency domain. The MR impact damper is then incorporated with vehicle crash system. The governing equation of motion of vehicle model is formulated considering occupant model. Dynamic characteristics of vehicle collision system investigated with computer simulation.

Keywords

References

  1. Witteman, W., 1999, 'Improved Vehicle Crashworthiness Design by Control of the Energy Absorption for Different Collision Situations,' PhD. Dissertation, Eindhoven University of Technology, Automotive Engineering & Product Design Technology, Eindhoven, The Netherlands
  2. Mizuno, K. and Kajzer, J., 1999, 'Compatibility Problems in Frontal, Side, Single Car Collisions and Car-to-pedestrian Accidents in Japan', Accident Analysis Prev., Vol. 31, No. 4, pp. 381 - 391 https://doi.org/10.1016/S0001-4575(98)00076-1
  3. Witteman, W., 2005, 'Adaptive Frontal Structure Design to Achieve Optimal Deceleration Pulses' , Proceedings of the 19th International Technical Conference on the Enhanced Safety of Vehicles (ESV); Washington DC, United States, p. 8
  4. Wagstrom, L., Thomson, R. and Pipkorn, B., 2004, 'Structural Adaptivity for Acceleration Level Reduction in Passenger Car Frontal Collisions' , International Journal of Crash Vol. 9, No. 2, pp. 121 - 127 https://doi.org/10.1533/ijcr.2004.0285
  5. Jawad, S. A. W., 1996, 'Intelligent Hydraulic Bumper for Frontal Collision Mitigation' , Crashworthiness and Occupant Protection in Transportation Systems ASME, AMD-Vol. 218, pp. 181-189
  6. Lee, D. Y., Choi, Y. T. and Wereley, N. M., 2002, 'Performance Analysis of ERIMR Impact Damper Systems Using Herschel-Bulkley Model' , Journal of Intelligent Material Systems and Structures, Vol. 13, No. 7- 8, pp, 525 - 531 https://doi.org/10.1106/104538902031061
  7. Ahmadian, M., Appleton, R. and Norris, J. A., 2002, 'An Analytical Study of Fire Out of Battery Using Magnetorheological Dampers' , Shock and Vibration, Vol. 9, pp. 129 -142 https://doi.org/10.1155/2002/983140
  8. Lee, H. S. and Choi, S. B., 2000, 'Control and Response Characteristics of a Magnetorheological Fluid Damper for Passenger Vehicles' , Journal of Intelligent Material Systems and Structures, Vol. 11, No. 1, pp. 80 - 87 https://doi.org/10.1177/104538900772664422
  9. Lee, H. S., Choi, S. B. and Lee, S. K., 2001, ' Vibration Control of a Passenger Vehicle Featuring MR Suspension Units' , Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 11, No. 1, pp. 41 - 48
  10. Song, H. J., Choi, S. B., Kim, J. H. and Kim, K. S., 2004, 'Performance Evaluation of ER Shock Damper Subjected to Impulse Excitation' , Journal of Intelligent Material Systems and Structures Vol. 13, pp. 625 - 628 https://doi.org/10.1177/1045389X02013010003
  11. Elmarakbi, A. M. and Zu, J. W., 2004, 'Dynamic Modeling and Analysis of Vehicle Smart Structures for Frontal Collision Improvement' , International Journal of Automotive Technology, Vol. 5, No, 4, pp. 244 - 255
  12. Kamal, M., 1979, 'Analysis and Simulation of Vehicle-to-barrier Impact' , SAE Transactions, SAE Paper No.700414
  13. Weaver, J. R., 1968, 'A Simple Occupant Dynamics ModeJ' , Journal of Biomechanics, Vol. 1, pp. 185 - 191 https://doi.org/10.1016/0021-9290(68)90003-1
  14. Ham, S. J., Kim, D. S. and Lee, M. S., 1997, 'Study on Passenger Damage Variation for Vehicle Collision Deceleration Difference', A Previous Report of Daewoo Motor Company, pp. 64 -71

Cited by

  1. A Study on Deploying Time of Active Hood Lift System of Passenger Vehicles with Principal Design Parameters vol.26, pp.1, 2016, https://doi.org/10.5050/KSNVE.2016.26.1.063
  2. Performance Evaluation of Active Hood Lift System of Passenger Vehicles with Different Operating Method vol.26, pp.3, 2016, https://doi.org/10.5050/KSNVE.2016.26.3.242
  3. Experimental Evaluation of Deployment Time of Active Hood Lift System According to Structural Improvement vol.26, pp.3, 2016, https://doi.org/10.5050/KSNVE.2016.26.3.265