Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Numerical Simulation of Effects of TGO Growth and Asperity Ratio on Residual Stress Distributions in TC-BC-TGO Interface Region for Thermal Barrier Coatings

열차폐 코팅의 TGO 성장과 형상비에 따른 TC-BC-TGO 계면에서의 잔류응력 변화에 대한 유한요소해석

  • Jang, Jung-Chel (Department of Material Science and Engineering, Hanyang University) ;
  • Choi, Sung-Churl (Department of Material Science and Engineering, Hanyang University)
  • 장중철 (한양대학교 신소재공학과) ;
  • 최성철 (한양대학교 신소재공학과)
  • Published : 2006.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

The residual stresses in the interface region of the Thermal Barrier Coating (TBC)/Thermally Grown Oxide (TGO)/Bond Coat (BC) were calculated on the TBC-coated superalloy samples using a Finite Element Method (FEM). It was found that the stress distribution of the interface boundary was dependent upon mainly the geometrical shape or its aspect ratio and the thickness of TGO layer, which was formed by growth and swelling behavior of oxide layer. Maximum compressive residual stress in the TBC/TGO interface is higher than that of the TGO/bond coat interface, and the tensile stress had nothing to do with change of an aspect ratio. The compressive residual stresses in the TBC/TGO and TGO/bond coat interface region increased gradually with the TGO growth.

Keywords

References

  1. G. C. Chang and R. A. Miller, 'Behavior of Thermal Barrier Coatings for Advanced Gas Turbine Blades,' Surface and Coating Technology, 30 [1] 13-28 (1987) https://doi.org/10.1016/0257-8972(87)90004-1
  2. E. Tzimas, H. Mullejans, S. D. Peteves, J. Bressers, and W. Stamm, 'Failure of Thermal Barrier Coating Systems under Cyclic Themomechanical Loading,' Acta Mater., 48 4699- 707 (2000) https://doi.org/10.1016/S1359-6454(00)00260-3
  3. A. G. Evans, D. R. Mumm, J. W. Hutchinson, G. H. Meier, and F. S. Pettit, 'Mechanisms Controlling the Durability of Thermal Barrier Coatings,' Progress in Mater. Sci., 46 505- 53 (2001) https://doi.org/10.1016/S0079-6425(00)00020-7
  4. A. M. Freborg, B. L. Ferguson, W. J. Brindley, and G. J. Petrus, 'Modeling Oxidation Induced Stresses in Thermal Barrier Coatings,' Mater. Sci. Eng. A, 245 [1] 182-90 (1998) https://doi.org/10.1016/S0921-5093(97)00849-6
  5. G. J. Petrus and B. L. Ferguson, 'A Software Tool to Design Thermal Barrier Coatings : A Technical Note,' J. Thermal Spray Tech., 6 [1] 29-34 (1997) https://doi.org/10.1007/BF02646309
  6. M. J. Pindera, J. Aboudi, and S. M. Arnold, 'Analysis of Plasma-Sprayed Thermal Barrier Coatings with Homogeneous and Heterogeneous Bond Coats under Spatially Uniform Cyclic Thermal Loading,' NASA/TM-2003-210803, Dec., 2003
  7. J. Rosler, M. Baker, and M. Volgmann, 'Stress State and Failure Mechanisms of Thermal Barrier Coatings : Role of Creep in Thermally Grown Oxide,' Acta Mater., 49 3659-70 (2001) https://doi.org/10.1016/S1359-6454(01)00283-X
  8. M. Martena, D. Botto, P. Fino, S. Sabbadini, M. M. Gola, and C. Badini, 'Modelling of TBC System Failure : Stress Distribution as a Function of TGO Thickness and Thermal Expansion Mismatch,' Engineering Failure Analysis, 13 [3] 409-26 (2006) https://doi.org/10.1016/j.engfailanal.2004.12.027
  9. R. C. Hendricks and G. McDonald, 'The Effect of Annealing on the Creep of Plasma Sprayed Ceramics,' pp. 13-6, Presented in Seventh Annual Conference on Ceramics and Advances Materials, Cocoa Beach, Florida, Jan., 1983
  10. C. H. Hsueh and E. R. Fuller, Jr., 'Residual Stresses in Thermal Barrier Coatings : Effects of Interface Asperity Curvature/Height and Oxide Thickness,' Mater. Sci. Eng. A, 283 [1-2] 46-55 (2000) https://doi.org/10.1016/S0921-5093(00)00746-2
  11. X. Y. Gong and D. R. Clarke, 'On the Measurement of Strain in Coatings Formed on a Wrinkled Elastic Substrate,' Oxidation of Metals, 50 [5/6] 355-77 (1998) https://doi.org/10.1023/A:1018848607100
  12. F. Kroupa and J. Plesek, 'Nonlinear Elastic Behavior in Compression of Thermally Sprayed Materials,' Mater. Sci. Eng. A, 328 [1-2] 1-7 (2002) https://doi.org/10.1016/S0921-5093(01)01653-7
  13. M. Levit, I. Grimberg, and B. Z. Weiss, 'Residual Stresses in Ceramic Plasma-Sprayed Thermal Barrier Coatings : Measurement and Calculation,' Mater. Sci. Eng. A, 206 [1] 30-8 (1996) https://doi.org/10.1016/0921-5093(95)09980-8