DOI QR코드

DOI QR Code

Development of a Mower Attachable Hydraulic Boom for Tractor

트랙터용 유압붐 부착형 모워 개발에 관한 연구

  • Jang I.J. (Bio-Industrial Machinery Engineering, Kyungpook National University) ;
  • Kim T.S. (Graduate Student, Kyungpook National University) ;
  • Son J.R. (National Institute of Agricultural Engineering) ;
  • Bae C.Y. (Hangil A&G Co., Ltd.)
  • Published : 2006.08.01

Abstract

This study designed to develop a mower which can reach to side of a tractor or inclined road side and operate weeding. The prototype consists of 4 parts; the base and turning equipment, the boom, the arm, the weeder. The hydraulic actuators were divided into two operations, weeding and operation of boom and they were controlled by electrical equipment. Weeding was very effective when pressure set up at $15{\ell}/min$ using weeding, as $2.27kg{\cdot}m$, 2,210rpm. Weeding range of flail mower was 1.1 to 2.6m from the center of turning equipment at a flat. In case of disk mower, it was 1.5 to 2m. As a result of operation test, flail mower was appropriate for weeding at fence and short weeds, disk mower was appropriate for long weeds.

Keywords

References

  1. Kwon, Y. W., H. S. Hwang and B. H. Kang. 1993. Herbicidal Phytotoxicity under Adverse Environments and Countermeasures. Journal of KSWS. 13(4). pp. 210-233
  2. Kim, K. U. 1992. Crop Injury (Growth Inhibition) Induced by Herbicides and Remedy to Reduce It, Journal of KSWS. 12(3). pp. 261-270
  3. Lee, I. Y., J. E. Park, S. T. Lim, J. R. Cho and E. S. Lim. 2002. Crop Injury Caused by Herbicides. Journal of KSWS. 22(2). pp. 178-184
  4. Alamo Group. 1995. Products Catalog. England
  5. Berry France. 1998. Products Catalog. France
  6. Fort & PEGORARO SpA. 1998. Products Catalog. France
  7. 조명동. 1997. 경사지 과수원 종합관리 국제세미나 참관기. 원예화세계 제2권 4호 p54
  8. 정창화. 2002. 트랙터 부착형 이앙기의 개발. 경북대학교 석사 학위 논문
  9. 아세아 종합기계(주). 1999. 아세아 MF 트랙터 사용설명서. 부품명세서
  10. 오인식, 박원규, 김병갑, 허유만, 조성구. 2001 물관리 기계에 관한 연구 : 용배수로 수초제거기 개발 농업기계화시험연구보고서. 2000. 농촌진흥청농업기계화연구소. pp. 50-57

Cited by

  1. Electro-hydraulic Characteristic Analysis of Arm-type Implement for Three-point Hitch vol.36, pp.5, 2011, https://doi.org/10.5307/JBE.2011.36.5.314
  2. Development of a Lifting Utility with Balance-controlled Platform vol.36, pp.3, 2011, https://doi.org/10.5307/JBE.2011.36.3.171
  3. Performance Analysis of Electronic Control System for Weeding Implement such as Slope Land vol.8, pp.3, 2015, https://doi.org/10.17661/jkiiect.2015.8.3.229