Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지

The Effects of Blending Starches on the Development of Plybond Strength of Two-ply Linerboard

삼성분 전분혼합에 의한 이겹지의 층간결합강도 개선

  • Lee, Hak-Lae (Dept. of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Ryu, Jeong-Yong (Chemical biotechnology research center, Korea Research Institute of Chemical Technology)
  • 이학래 (서울대학교 농업생명과학대학 산림과학부) ;
  • 류정용 (한국화학연구원 바이오정밀화학연구센터)
  • Published : 2007.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The effects of blending starches with different gelatinization temperatures on the development of ply-bond strength were systematically investigated using a three component mixture design technique. Oxidized corn starches with different gelatinization temperatures were blended with natural corn starch and sprayed for plybonding. Optimum blend ratio for maximizing plybond strength improvement for the starch blends was 40% of natural starch, 27% of oxidized starch with low gelatinization temperature and 33% of oxidized starch with high gelatinization temperature. Starch granules with the lowest gelatinization temperature gelatinizes at the lowest temperature, while the natural corn starch gelatinizes at later stage of drying. The improvement of plybond strength with starch blends were verified on machine trial as well. Plybond strength improvement obtained from the machine trial was lower than that achievable with handsheets, which was attributed to the lower internal bond strength of the linerboards made from recycled fibers.

Keywords

References

  1. Attwood, B. and Moore, G., An Introduction to the Theory and Practice of Multiply Forming: I, Pira International (1995)
  2. Muller, H., Advanced multi-layer and multi-ply sheet forming technology for paper, tissue and board grades, The 21 st International Conference on Pulping and Papermaking Technology Proceedings, p. 41, Korea TAPPI, Seoul (1994)
  3. Ryu, J. Y., and Lee, H. L., Improvement of ply bond strength of two-ply sheets by spraying of starch blends, Tappi J. 6(5):1 (2007)
  4. 류정용, 이학래, 전분분무를 통한 다층지의 물성개선, 펄프종이기술
  5. Cutrone, L. Computer Techniques in 'Principles of Paint Formulation,' Ed. Woodbridge, R., p. 110, Blackie & Son Ltd., London (1991)
  6. 이학래, 강희철, 남춘래, 윤재한, 김영하, 도공액의 최적화와 고속 도공용 라텍스, 펄프종이기술 25(4): 73 (1993)
  7. 佐藤潔, 新規層間 スブレ-用紙力劑について, 紙 べルプ技術協會 1996 年次大會 Proceeding B-14 : 331 (1996)
  8. Willner, T., Multi-fourdrinier machines for manufacturing containerboard, The 12th International Seminar on Pulping and Papermaking Technology Proceedings, p. 13, Korea TAPPI, Seoul (1989)
  9. 김순철, 골板紙製造 新技術 -접착제-, 골판지포장.물류 2(12) : 83 (1996)