A Parameter Regionalization Study of a Modified Tank Model Using Characteristic Factors of Watersheds

유역특성인자를 이용한 수정탱크모형 매개변수의 지역화

Lee, Sang-Ho;Kang, Shin-Uk
이상호;강신욱

  • Published : 20070700

Abstract

Multiple regression equations were derived to estimate regional parameters of a modified Tank Model with three serial tanks. The regional parameters can be used to compute long term runoff from ungaged watersheds. The Tank Model parameters were estimated for the fifteen watersheds of dam sites and stream stations. A global optimization method of Shuffled Complex Evolution algorithm was found to be more proper than local optimization methods for parameter estimation of the Tank Model. The six watershed characteristic factors are predictor variables of the regression equations. Model verification was performed for the watersheds of Chungju Dam and Seolmacheon using the fitted parameters from the regression equations. The absolute errors of long term runoff from the verification are eight percent or less.

Keywords

References

  1. 강신욱, 이상호, 이길성(2002) 탱크모형 유출응답의 지체를 위한 모형수정. 한국수자원학회 학술발표회논문집, 한국수자원학회, pp. 1223-1229
  2. 김선주, 김필식, 윤찬영(2000) 미계측유역의 일유출량 추정을 위한 탱크모형 매개변수의 추정. 한국농공학회 학술발표회논문집, 한국농공학회, pp. 412-418
  3. 김현영, 박승우(1986) 유역특성에 따른 탱크모형 매개변수의 변화. 한국농공학회지, 한국농공학회, 제28권, 제2호, pp. 42-52
  4. 강민구, 박승우, 임상준, 김현준(2002) 전역최적화 기법을 이용한 강우-유출모형의 매개변수 자동보정. 한국수자원학회논문집, 한국수자원학회, 제35권, 제5호, pp. 541-552
  5. 김현영, 박승우(1988) 관개용 저수지의 일별 유입량과 방류량의 모의발생(I). 한국농공학회지, 한국농공학회, 제30권, 제1호, pp. 50-62
  6. 노재경(1991) 토양수분 저류에 의한 일 유출량 유역 모형. 박사학위논문, 서울대학교
  7. 박봉진, 차형선, 김주환(1997) 유전자 알고리즘을 이용한 저류함수모형의 매개변수 추정에 관한 연구. 한국수자원학회논문집, 한국수자원학회, 제30권, 제4호, pp. 347-355
  8. 이길성, 김상욱(2001) 유전자 알고리즘을 시용한 SSARR 모형의 자동보정 대한토목학회논문집, 대한토목학회, 제21권 제3B호, pp. 171-183
  9. 이상호, 안태진, 윤병만, 심명필(2003) 적설 및 융설 모의를 포함한 탱크모형의 소양강댐 및 충주댐에 대한 적용. 한국수자원학회논문집, 한국수자원학회, 제36권, 제5호, pp. 851-861
  10. 한국도시행정연구소(2000). 전국통계연감
  11. 허유만, 박승우, 임상준(1993) 중소유역의 일별 용수수급해석을 위한 하천망모형의 개발(I) - 중소유역의 일유출량 추정. 한국농공학회지, 한국농공학회, 제35권, 제1호, pp. 40-49
  12. Box, M.J. (1965) A new method of constrained optimization and a comparison with other methods. Computer Journal, Vol. 8, pp. 42-52 https://doi.org/10.1093/comjnl/8.1.42
  13. Burnash, R.J.C. (1995) The NWS River forecasting system - catchment modeling. Computer models of watershed hydrology, Water Resources Pub., Colorado, p. 359
  14. Chow, V.T., Maidment D.R., and Mays L.W. (1988) Applied hydrology, McGraw-Hill, Singapore, pp. 211-213
  15. Duan, Q. (1991) A global optimization strategy for efficient and effective calibration of hydrologic models. Ph.D. dissertation, Univ. of Arizona, Tucson
  16. Duan, Q., Sorooshian, S., and Gupta, V.K. (1994) Optimal use of the SCE-UA global optimization method for calibrating watershed model. Journal of Hydrology, Vol. 158, pp. 265-284 https://doi.org/10.1016/0022-1694(94)90057-4
  17. Gupta, V.K., Sorooshian, S., and Yapo, P.O. (1997) Status of automatic calibration for hydrologic models: comparison with multilevel expert calibration. Journal of Hydrologic Engineering, ASCE, Vol. 4, No.2, pp. 135-143 https://doi.org/10.1061/(ASCE)1084-0699(1999)4:2(135)
  18. Kuester J.L. and Mize, J.H. (1973) Optimization techniques with FORTRAN. McGraw-Hill Inc
  19. Neider, J.A. and Mead, R. (1965) A simplex method for function minimization. Computer Journal, Vol. 7, pp. 308-313 https://doi.org/10.1093/comjnl/7.4.308
  20. Rosenbrock, H.H. (1960) An automatic method for finding the greatest or least value of a function. Computer Journal, Vol. 3, pp.175-184 https://doi.org/10.1093/comjnl/3.3.175
  21. Sorooshian, S. and Gupta, V.K. (1995) Model calibration. Computer models of watershed hydrology. Water Resources Pub., Colorado, pp. 23-68
  22. Yokoo, Y., Kazama, S., Sawamoto, M., and Nishimura H. (2001) Regionalization of lumped water balance model parameters based on multiple regression. Journal of Hydrology, Vol. 246, pp. 209-222 https://doi.org/10.1016/S0022-1694(01)00372-9