Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Formability Sensitivity to Die Design in Warm Square Cup Deep Drawing of AZ31 Sheet

AZ3l 판재의 온간 사각컵 디프드로잉에서 금형 설계에 대한 성형성 민감도의 평가

  • 김기덕 (한국생산기술연구원 정밀금형팀) ;
  • 김흥규 (한국생산기술연구원 정밀금형팀)
  • Published : 2007.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

Magnesium alloy has low formability at room temperature and therefore, in many cases, forming at elevated temperatures is necessary to obtain the required material flow without failure. Tn the present study, square cup deep drawing tests using the magnesium alloy AE31 sheet were experimentally conducted using the porches and dies with different edge radius to evaluate the formability sensitivity to the die design variables. The experimental results showed that the fracture position over the cup wall moved from the punch nose to the flange as the die temperature increased, and that the drawing depth change was more affected by the punch radius than the die radius.

Keywords

References

  1. H. Takuda, T. Yoshii, N. Hatta, 1999, Finite-element analysis of the formability of a magnesium-based alloy AZ31 sheet, J. Mat. Proc. Tech., Vol. 89-90, pp. 135-140 https://doi.org/10.1016/S0924-0136(99)00039-4
  2. F. K. Chen, T. B. Huang, 2003, Formability of stamping magnesium-alloy AZ31 sheets, J. Mat. Proc. Tech., Vol. 142, pp. 643-647 https://doi.org/10.1016/S0924-0136(03)00684-8
  3. F. K. Chen, T. B. Huang, C. K. Chang, 2003, Deep drawing of square cups with magnesium alloy AZ31 sheets, Int. J. Mach. Tool. Manufac., Vol. 43, pp. 1553-1559 https://doi.org/10.1016/S0890-6955(03)00198-6
  4. E. Doege, K. Droder, 2001, Sheet metal forming of magnesium wrought alloys-formability and process technology, J. Mat. Proc. Tech., Vol. 115, pp. 14-19 https://doi.org/10.1016/S0924-0136(01)00760-9
  5. 김흥규, 이위로, 홍석관, 김종덕, 한병기, 2006, 마그네슘 합금 AZ31 판재의 온간 사각컵 디프드로잉 공정의 유한요소 해석, 한국소성가공학회지, 제 15권, 제 3호, pp. 232-240 https://doi.org/10.5228/KSPP.2006.15.3.232
  6. 박진기, 김영석, T.Kuwabara, 유봉선, 2005, AZ31 마그네슘 합금 판재의 소성변형특성, 한국소성가공학회지, 제 14권, 제 6호, pp. 520-526 https://doi.org/10.5228/KSPP.2005.14.6.520
  7. 추동균, 강충길, 이준희, 2005, 툴 표면처리 및 온도가 AZ31 마그네슘 판재의 드로잉에 미치는 영향, 한국소성가공학회 2005년도 추계학술대회 논문집, pp. 118-121
  8. N. Ogawa, M. Shiomi, and K. Osakada, 2002, Forming limit of magnesium alloy at elevated temperatures for precision forging, Int. J. Mach. Tool. Manufac., Vol. 42, pp. 607-614 https://doi.org/10.1016/S0890-6955(01)00149-3
  9. D. L. Yin, K. F. Zhang, G. F. Wang, and W. B. Han, 2005, Warm deformation behavior of hot-rolled AZ31 Mg alloy, Mat. Sci. Eng. A, Vol. 392, pp. 320-325 https://doi.org/10.1016/j.msea.2004.09.039