DOI QR코드

DOI QR Code

Electrical Insulation Design of a 154 kV Class HTS Transformer

154 kV급 고온초전도 변압기의 전기절연 설계

  • 천현권 (경상대 대학원 전기공학과) ;
  • 곽동순 (경상대 대학원 전기공학과) ;
  • 최재형 (경상대 대학원 전기공학과) ;
  • 김상현 (경상대 전기공학과)
  • Published : 2007.03.31

Abstract

In the response to the demand for electrical energy, much effort was given to develop and commercialize high temperature superconducting (HTS) power equipment has been made around the world. Especially, a HTS transformer is one of the most promising devices. Recently, Korea Polytechnic University and Gyeongsang National University are developing a power distribution and transmission class HTS transformer that is one of the 21st century superconducting frontier projects in Korea. For the development of 154 kV class HTS transformer, the cryogenic insulation technology should be established. We have been analyzed insulation composition and investigated electrical characteristics such as the breakdown of $LN_2$, barrier, kapton films, and the surface flashover of FRP in $LN_2$. Furthermore, we are going to compare with measured each value and apply the value to the most suitable insulating design of the HTS transformer.

Keywords

References

  1. B. W. McConnell, S. P. Mehta, and M. S. Walker, "HTS transformers," IEEE Power Engineering Review, pp. 7-11, June 2000
  2. W. S. Kim, S. Y. Hahn, K. D. Choi, H. G. Joo, and K. W. Hong, "Design of a 1 MVA high Tc superconducting transformer," IEEE Trans. Appl. Supercond., Vol. 13, No. 2, pp. 2291-2293, June 2003 https://doi.org/10.1109/TASC.2003.813080
  3. T. Kim, W. S. Kim, S. H. Kim, K. D. Choi, G. W. Hong, H. G. Joo, and S. Y. Hahn, "AC Loss Effects on the Design of HTS Windings for 1 MVA Power Transformer," Journal of the Korea Institute of Applied Superconductivity andCryogenics, Vol. 6, No. 4, pp. 32-36, 2004
  4. S. M. Baek, J. M. Joung, and S. H. Kim, "Breakdown Properties of Coolant for HTS Apparatus Operating at Cryogenic Temperature," Journal of the Korea Institute of Applied Superconductivity and Cryogenics, Vol. 5, No. 1, pp. 52-55, 2003
  5. H. Craig Miller, "Surface Flashover of Insulations," IEEE Trans. on Electrical Insulation, Vol.24, No. 5, pp. 765-786, 1989 https://doi.org/10.1109/14.42158
  6. J. Gerhold, "Properties of cryogenic insulants," Cryogenics, Vol. 38, No. 11, pp. 1063-1081, Nov. 1998 https://doi.org/10.1016/S0011-2275(98)00094-0
  7. S. H. Kim, S. M. Baek, Y. S. Kim, S. Y. Chung, and J. M. Joung, "Surface flashover characteristics in liquid nitrogen for application of superconducting pancake coils," Cryogenics, Vol. 42, No. 6-7, pp. 415-418, 2002 https://doi.org/10.1016/S0011-2275(02)00066-8
  8. S. M. Baek, J. M. Joung, J. H. Lee, and S. H. Kim, "Electrical Breakdown Properties of Liquid Nitrogen for Electrical Insulation Design of Pancake Coil Type HTS Transformer," IEEE Trans. Appl. Supercond., Vol. 13, No. 2, pp. 2317-2320, June 2003 https://doi.org/10.1109/TASC.2003.813112