DOI QR코드

DOI QR Code

Development of Automatic Displacement Measuring System Using 3D Digital Photogrammetry Image and Its Application

수치사진영상을 이용한 자동 변위계측시스템의 개발과 적용

  • 한중근 (중앙대학교 공과대학 건설환경공학과) ;
  • 김영석 (한국건설기술연구원 지반연구부) ;
  • 조삼덕 (한국건설기술연구원 지반연구부) ;
  • 곽기석 (한국건설기술연구원 지반연구부) ;
  • 홍기권 (중앙대학교 공과대학 토목공학과)
  • Published : 2007.05.31

Abstract

Recently, for the stabilization estimation of structures, many automatic measuring instruments with expensiveness and high accuracy have been developed and utilized. However, the existing manual measuring systems are almost impossible to measure the real-time for the whole surface of large-scale structures and an automatic measuring system has disadvantages with demanding enormous expense. In this study, 3D digital visual monitoring system was developed by using digital photogrammetry technique. To confirm application of developed system, it was applied to the measurement of the wall displacement of concrete surface and displacement measurement of reinforced-soil wall block. Then, the result of the test was compared with measuring value of total station. Based on the results of the comparison, the application of visual monitoring system was evaluated. The results show that the developed visual monitoring system could be available in displacement measure of structures.

최근 구조물의 안정성 평가를 위해서 많은 고가의 고정밀도 자동화 계측장치가 개발 사용되고 있다. 그러나 정밀장치를 사용한 기존의 수동계측은 대형구조물 전체에 대해 실시간 계측이 불가능하며 자동화계측에도 막대한 비용이 요구되는 단점이 있다. 따라서 본 연구에서는 실시간 수치사진영상을 이용한 3차원 자동화 비쥬얼모니터링시스템을 개발하였다. 그리고 대형구조물의 실시간 계측분야에 있어서 개발시스템의 적용성 및 정밀도에 대한 신뢰성을 확인하기 위해 콘크리트 벽면의 강체변위에 대한 계측실험과 보강토옹벽블록의 변위계측실험을 실시하였고, 실험결과를 기존의 정밀계측장치인 토탈스테이션의 측정결과와 비교하였다. 이를 바탕으로 개발시스템이 기존 계측시스템의 단점을 해결할 수 있었고, 고정밀도이면서 실시간 계측시스템으로서의 활용이 가능함을 확인할 수 있었다.

Keywords

References

  1. 강준묵 (1992), 지상사진측량에 의한 구조물변형의 최적해석에 관한 연구최종보고서, 한국과학재단
  2. 강준묵, 배상호, 송승호 (1999), 윈도우 시스템체계를 이용한 수치사진기법 구축, 대한토목학회 논문집, 제19권 제III-2호, pp. 325-334
  3. 강준묵, 윤희천, 배상호 (1995), 교량의 안전진단을 위한 3차원 변형해석에 관한 연구, 한국측지학회, 13(1), pp.69-76
  4. 박운용, 김조수, 이인수 (2001), GPS를 이용한 불안정 댐의 모니터링, 대한토목학회 논문집, 21(3-D), pp.383-392
  5. 배상호 (2003), 구조물변위 해석을 위한 수치사진측량의 컴포넌트 개발, 충남대학교 박사학위논문
  6. 한중근, 배상호 오다영 (2001), 사면의 지표변위계측을 위한 사진측량기법의 적용, 한국환경복원녹화기술학회, 제4권 제3호, pp.10-18
  7. 한중근, 송영석 (2003), 사면안정해석을 위한 사진측량을 이용한 사연변위계측시스템, 한국지반공학회 논문집, 제19권 4호, pp. 23-32
  8. 한중근, 조삼덕, 강명진, 홍기권 (2005), Dam 계측을 위한 비쥬얼 모니터링 System 개발, 중앙대학교 기술과학연구소 논문집, 제 35-1집, pp.81-89
  9. C.S. Fraser (1991), A resume of some industrial applications of photogrammetry, ISPRS Journal of Photogrammetry and Remote Sensing
  10. C.S. Fraser (1995), Full Automation of Sensor Calibration, Exterior Orientation and Triangulation in Industrial Vision Metrology, International Workshop on Image analysis and Information Fusion
  11. C.S. Fraser and M.R. Shortis (1998), State of the Art of 3D Measurment Systems for Industrial and Engineering Applications, 21st International Congress of FIG
  12. Gruen A. (1992), Recent advances of photogrammetry in robot vision, Journal of photogrammetry and remote sensing, Vol.47, 307-323 https://doi.org/10.1016/0924-2716(92)90021-Z
  13. M.A. Chapman and D.O. Lichti (1995), CCD camera calibration using the finite element method, Proceedings of SPIE
  14. Marsha Jo Hannah (1989), A system for digital stereo image matching, Photogrammatic Engineering and Remote Sensing, pp. 1765-1770
  15. M.R. Shortis, T.A. Clarke and T. Short (1994), Comparison of some techniques for the subpixel location of discrete target images, Proceedings of SPIE, Vol.2350, pp.239-250
  16. M. Stewart and M. Tsakiri (2001), Long-term dam surface monitoring using the global positioning system, Electronic Journal of Geotechnical Engineering, 6, pp.1-19
  17. R.A.H. Munjy (1985), A finite element analysis of the effect of having fiducial marks in non-topographic photogrammetry, Annual Meeting 51st, Washington, DC, 160-169
  18. R.A.H. Munjy (1986), Calibrating non-metric cameras using the finite-element method
  19. Soo Cheol Lee, Een Jun Hwang and Jung Geun Han (2006), Efficient Image Retrieval Based on Minimal Spatial Relationships, Journal of Information Science and Engineering, Vol.22, pp. 447-459
  20. Wong and EI-Hakim (1990), Working group VII: digital and realtime close-range photogrammetry, Close-Range Photogrammetry Meets Machine Vision, SPIE Proceedings, Vol.1395