Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Optimization of Finish Cutting Condition of Impeller with Five-Axis Machine by Response Surface Method

반응표면법을 이용한 5축 임펠러 정삭 가공의 최적화

  • 임표 (전북대학교 공업기술 연구소) ;
  • 양균의 (전북대학교 기계항공시스템 공학과)
  • Published : 2007.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

An impeller is a important part of turbo-machinery. It has a set of twisted surfaces because it consists of many blades. Five-axis machining is required to produce a impeller because of interference between tool and workpiece. It can obtain good surface integrity and high productivity. This paper proposes finish cutting method for machining impeller with 5-axis machining center and optimization of cutting condition by response surface method. Firstly, cutting methods are selected by consideration of operation characteristics. Secondly, response factors are determined as cutting time and cutting error for prediction of productivity. Experiments are projected by central composite design with axis point. Thirdly, regression linear models are estimated as single surface in the leading edge and as dual surface in the hub surface cutting. Finally, cutting conditions are optimized.

Keywords

References

  1. Nelik, Lev, 1999, 'Centrifugal and Rotary Pumps : Fundamentals with Applications,' CRC Press
  2. Johanna, S., Frederic, M., Jean, Max Redonnet and Walter, R., 2005, 'Analysis of Improved Positioning in Five-Axis Ruled Surface Milling Using Envelope Surface,' Computer-Aided Design, Vol. 37, Issue 10, pp. 989-998 https://doi.org/10.1016/j.cad.2004.09.002
  3. Lauwers, B., Dejonghe, P. and Kruth J. P., 2003, 'Optimal and Collision Free Tool Posture in Five-Axis Machining Through the Tight Integration of Tool Path Generation and Machine Simulation,' Computer-Aided Design, Vol. 35, Issue 5, pp. 421-432 https://doi.org/10.1016/S0010-4485(02)00045-3
  4. Choi, B. K., Park, J. W. and Jun, C. S., 1993, 'Cutter-location Data Optimization in 5-Axis Surface Machining,' Computer-Aided Design, Vol. 25, No. 6, pp. 377-386 https://doi.org/10.1016/0010-4485(93)90033-K
  5. Li, S. X. and Jerard, R. B., 1994, '5-axis Machining of Sculptured Surfaces with a Flat-end Cutter,' Computer-Aided Design, Vol. 26, No. 3, pp. 165-178 https://doi.org/10.1016/0010-4485(94)90040-X
  6. Jensen, C. G., Red, W. E. and Pi, J., 2002, 'Tool Selection for Five-axis Curvature Matched Machining,' Computer Aided Design, Vol. 34, pp. 251-266 https://doi.org/10.1016/S0010-4485(01)00086-0
  7. Chen, S. L., Wang, W. T., 2001, 'Computer Aided Manufacturing Technologies for Centrifugal Compressor Impellers,' Journal of Materials Processing Technology, Vol. 115, pp. 284-293 https://doi.org/10.1016/S0924-0136(01)00828-7
  8. Suresh, P. V. S., Venkateswara, Rao P. and Deshmukh S. G., 2002, 'A Genetic Algorithmic Approach for Optimization of Surface Roughness Prediction Model,' International Journal of Machine Tools and Manufacture, Vol. 42, Issue 6, pp. 675-680 https://doi.org/10.1016/S0890-6955(02)00005-6
  9. Lim, P., Lee, H. K. and Yang, G. E., 2005, 'High Speed Machining of the Thin Surface Parts Using Liquid Metal and Selection of Machining Condition by Latin Square Method,' Journal of Korean Society of Precision Engineering, Vol. 22, No. 10, pp. 99-106
  10. Wang, M.Y. and Chang, H. Y., 2004, 'Experimental Study of Surface Roughness in Slot End Milling AL2014-T6,' International Journal of Machine Tools & Manufacture, Vol. 44, pp. 51-57 https://doi.org/10.1016/j.ijmachtools.2003.08.011
  11. Park, S. H., 2001, 'Morden Design of Experiments,' Minyongsa, pp. 305-329
  12. Park, S. H., 2003, 'Regression Analysis,' Minyongsa, pp. 175-318

Cited by

  1. Structural Optimization for Small Scale Vertical-Axis Wind Turbine Blade using Response Surface Method vol.16, pp.4, 2013, https://doi.org/10.5293/kfma.2013.16.4.022
  2. Baseplate Design to Improve Swaging Performance of Actuator in a HDD vol.33, pp.8, 2009, https://doi.org/10.3795/KSME-A.2009.33.8.760
  3. Analytical Prediction of Heating Temperature to Manufacture Rotor with Shrink Fit for Ultra High Speed Motor According to Change Dimension of Rotor vol.33, pp.9, 2009, https://doi.org/10.3795/KSME-A.2009.33.9.963
  4. Static and Dynamic Analysis and Optimization Design of 40,000-rpm High-Speed Spindle for Machine Tools vol.37, pp.1, 2013, https://doi.org/10.3795/KSME-A.2013.37.1.105
  5. Enhancement of J estimation for typical nuclear pipes with a circumferential surface crack under tensile load vol.24, pp.3, 2010, https://doi.org/10.1007/s12206-010-0114-0