Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

A Rotordynamics Analysis of High Efficiency and Hybrid Type Vacuum Pump

고효율 복합형 진공펌프의 로터다이나믹 해석

  • 김병옥 (한국기계연구원 e-엔지니어링연구센터) ;
  • 이안성 (한국기계연구원 e-엔지니어링연구센터) ;
  • 노명근 ((주)엘오티베큠)
  • Published : 2007.10.20
Download PDF
⟨ Previous Next ⟩

Abstract

A rotordynamic analysis was performed with a dry vacuum pump, which is a major equipment in modern semiconductor and LCD manufacturing processes. The system is composed of screw rotors, lobes picking air, helical gears, driving motor, and support rolling element bearings of rotors and motor. The driving motor-screw rotor system has a rated speed of 6,300 rpm, and was modeled utilizing a rotordynamic FE method for analysis, which was verified through 3-D FE analysis and experimental modal analysis. As loadings on the bearings due to the gear action were significant in the system considered, each resultant bearing load was calculated by considering the generalized forces of the gear action as well as the rotor itself. Each resultant bearing loading was used in calculating each stiffness of rolling element bearings. Design goals are to achieve wide separation margins of lateral and torsional critical speeds, and favorable unbalance responses of the rotor in the operating range. Then, a complex rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds, whirl natural frequencies and mode shapes, unbalance responses under various unbalance locations, and torsional interference diagram. Results show that the entire system is well designed in the operating range. In addition, the procedure of rotordynamic analysis for dry vacuum pump rotor-bearing system was proposed and established.

Keywords

References

  1. Bahen, R and Kuhn, M., 1993, 'Reliability of Dry Pumps Due to Process Related Adaptation and Prefailure Warning', Vacuum, Vol. 44, pp. 709-717 https://doi.org/10.1016/0042-207X(93)90130-3
  2. Lessard, Philip A., 2000, 'Dry Vacuum Pumps for Semiconductor Processes : Guidelines for Primary Pump Selection', Journal of Vacuum Science and Technology, Vol. 18, No.5, pp.1777-1783 https://doi.org/10.1116/1.582423
  3. Shimada, T., Yanagisawa, T. and Tagawa, K., 1990, 'Characterization of Noise Generated by a Dry Pump by Using a Vane Vacuum Pump and Noise Reduction', Journal of Noise Control Engineering, Vol. 35., No.3, pp.95-104 https://doi.org/10.3397/1.2827773
  4. Loffe, I. V., Koss, V. A, Gray, M and Livesey, R G., 1995, 'Modeling of a Multistage Claw Rotor Vacuum Pump', Journal of Vacuum Science and Technology, Vol. 13, No.2, pp.327-334
  5. Ando, K., Akutsu, I. and Ohmi, T., 1999, 'Grandational Lead Screw Vacuum Pump Development', Journal of Vacuum Science and Technology, Vol. 17, No.5, pp.583-597 https://doi.org/10.1116/1.590598
  6. Akutsu, I., Ozaki, M, Kyuko, S., Miyashita, T., Ozawa, M., 2000, 'Grandational Lead Screw Vacuum Pump', Journal of Vacuum Science and Technology, Vol. 18, No.3, pp.853-865
  7. Kim, B. O., Lee, A. S. and Noh, M. K, 2007, 'A Rotordynamic Analysis of Dry Pump Rotor-bearing System for High-speed Operation (in Korean)', Journal of Fluid Machinery, Vol. 10., No. 3, pp. 47-54 https://doi.org/10.5293/KFMA.2007.10.3.047
  8. Rao, J. S., 1996, 'Rotor Dynamics', Third Edition, New Age International Publishers, pp. 233-237
  9. Gitin, M. M, 1998, 'Handbook of Gear Design', McGraw-Hill Publishing, pp.3.20-3.22
  10. Harris, T. A, 2001, 'Rolling Bearing Analysis', John Wiley & Sons
  11. EL-SAYED, H. R, 1980, 'Stiffness of Deepgroove Ball Bearings', Wear, Vol. 63, pp.89-94 https://doi.org/10.1016/0043-1648(80)90075-7
  12. ISO 1940-1, 2003, Mechanical Vibrationbalance Quality Requirement for Rotors in a Constant (rigid) State
  13. API 617, 2002, Axial and Centrifugal Compressors and Expanders-compressors for Petroleum, Chemical and Gas Industry Services