A Modularized Charge Equalization Converter for a Hybrid Electric Vehicle Lithium-Ion Battery Stack

  • Park, Hong-Sun (Department of Electrical Engineering and Computer Science, KAIST) ;
  • Kim, Chong-Eun (Department of Electrical Engineering and Computer Science, KAIST) ;
  • Kim, Chol-Ho (Department of Electrical Engineering and Computer Science, KAIST) ;
  • Moon, Gun-Woo (Department of Electrical Engineering and Computer Science, KAIST) ;
  • Lee, Joong-Hui (SK Institute of Technology)
  • Published : 2007.10.20

Abstract

This paper proposes a modularized charge equalization converter for hybrid electric vehicle (HEV) lithium-ion battery cells, in which the intra-module and the inter-module equalizer are Implemented. Considering the high voltage HEV battery pack, over approximately 300V, the proposed equalization circuit modularizes the entire $M^*N$ cells; in other words, M modules in the string and N cells in each module. With this modularization, low voltage stress on all the electronic devices, below roughly 64V, can be obtained. In the intra-module equalization, a current-fed DC/DC converter with cell selection switches is employed. By conducting these selection switches, concentrated charging of the specific under charged cells can be performed. On the other hand, the inter-module equalizer makes use of a voltage-fed DC/DC converter for bi-directional equalization. In the proposed circuit, these two converters can share the MOSFET switch so that low cost and small size can be achieved. In addition, the absence of any additional reset circuitry in the inter-module equalizer allows for further size reduction, concurrently conducting the multiple cell selection switches allows for shorter equalization time, and employing the optimal power rating design rule allows fur high power density to be obtained. Experimental results of an implemented prototype show that the proposed equalization scheme has the promised cell balancing performance for the 7Ah HEV lithium-ion battery string while maintaining low voltage stress, low cost, small size, and short equalization time.

Keywords

References

  1. A. Emadi, S. Williamson, and A. Khaligh, 'Power electronics intensive solutions for advanced electric, hybrid electric, and fuel cell vehicular power systems,' IEEE Trans. Power Electron., vol. 21. pp. 567-577, May 2006 https://doi.org/10.1109/TPEL.2006.872378
  2. S. Williamson, A. Emadi, and K. Rajashekara, 'Comprehensive efficiency modeling of electric traction motor drives for hybrid electric vehicle propulsion applications,' IEEE Trans. Veh. Tech., vol. 56. pp. 1561-1572, July 2007 https://doi.org/10.1109/TVT.2007.896967
  3. J. M. Miller, 'Hybrid electric vehicle propulsion system architecture of the e-CVT type,' IEEE Trans. Power Electron., vol. 21. pp. 756-767, May 2006 https://doi.org/10.1109/TPEL.2006.872372
  4. A. Affanni, A. Bellini, G. Franceschini, P. Guglielmi, and C. Tassoni, 'Battery choice and management for new-generation electric vehicles,' IEEE Trans. Ind. Electron., vol. 52, pp. 1343-1349, Oct. 2005 https://doi.org/10.1109/TIE.2005.855664
  5. B. T. Kuhn, G. E. Pitel, and P. T. Krein, 'Electrical properties and equalization of lithium-ion cells in automotive applications,' in Proc. 2005 IEEE Vehicle Power and Propulsion Conf., Chicago, USA, Sep. 2005, pp. 55-59
  6. N. H. Kutkut and D. M. Divan, 'Dynamic equalization techniques for series battery stacks,' in Proc. 18th Annu. Int. Telecommunications Energy Conf., Boston, USA, Oct. 1996, pp. 514-521
  7. B. Lindemark, 'Individual cell voltage equalizers (ICE) for reliable battery performance,' in Proc. 13th Annu. Int. Telecommunications Energy Conf., Kyoto, Japan, Nov. 1991, pp. 196-201
  8. N. H. Kutkut, H. L. N. Wiegman, D. M. Divan and D. W. Novotny, 'Design considerations for charge equalization of an electric vehicle battery system,' IEEE Trans. Ind. Appl., vol. 35, pp. 28-35, Feb. 1999 https://doi.org/10.1109/28.740842
  9. M. Tang and T. Stuart, 'Selective buck-boost equalizer for series battery packs,' IEEE Trans. Aerosp. Electron. Syst., vol. 36, pp. 201-211, Jan. 2000 https://doi.org/10.1109/7.826322
  10. D. C. Hopkins, C. R. Mosling, and S. T. Hung, 'Dynamic equalization during charging of serial energy storage elements,' IEEE Trans. Ind. Appl., vol. 29, pp. 363-368, Mar.-Apr. 1993 https://doi.org/10.1109/28.216545
  11. N. H. Kutkut, H. Wiegman, and R. Marion, 'Modular battery charge equalizers and method of control,' U.S. Patent 6 150 795, Nov. 21, 2000
  12. H. Schmidt and C. Siedle, 'The charge equalizer-a new system to extend battery lifetime in photovoltaic system, U.P.S. and electric vehicle,' in Proc. 15th Annu. Int. Telecommunications Energy Conf., Paris, France, Sep. 1993, pp. 144-151
  13. Y.-S. Lee and G.-T. Cheng, 'Quasi-resonant zero-current-switching bidirectional converter for battery equalization applications,' IEEE Trans. Power Electron., vol. 21, pp. 1213-1224, Sep. 2006 https://doi.org/10.1109/TPEL.2006.880349
  14. N. H. Kutkut, 'A modular non dissipative current diverter for EV battery charge equalization,' in Proc. 13th Annu. Appl. Power Electron. Conf. and Exp., Anaheim, USA, Feb. 1998, pp. 686-690
  15. P. T. Krein, S. West, and C. Papenfuss, 'Equalization requirements for series VRLA battery,' in Proc. 16th Annu. Battery Conf. on Applications and Advances, Long Beach, USA, Jan. 2001, pp. 125-130
  16. N. H. Kutkut, 'Non-dissipative current diverter using a centralized multi-winding transformer,' in Proc. 28th Power Electron. Specialists Conf., St. Louis, USA, June1997, pp. 648-654
  17. H. -S. Park, C. -E. Kim, G. -W. Moon, J. -H. Lee, and J. K. Oh, 'Two-stage cell balancing scheme for hybrid electric vehicle Lithium-ion battery strings,' in Proc. 38th Power Electron. Specialists Conf., Orlando, USA, June 2007