DOI QR코드

DOI QR Code

On the Influence of End Plates upon the Tip Vortex Cavitation Characteristics of a Fin Stabilizer

안정기 핀의 팁 보오텍스 캐비테이션 특성에 미치는 날개 끝판의 효과

  • Seo, Dae-Won (Dept. of Naval Architecture and Ocean Engineering, Inha University) ;
  • Kim, Joung-Hyun (Dept. of Naval Architecture and Ocean Engineering, Inha University) ;
  • Lee, Seung-Hee (Dept. of Naval Architecture and Ocean Engineering, Inha University)
  • Published : 2008.02.29

Abstract

Fins are widely used for roll stabilization of passenger ferries and high performance naval ships, among others. In the present study, numerical simulations are performed to investigate the influence of end-plates upon the cavitation characteristics of a stabilizer fin for various angles of attack and speeds and the results are verified through a series of model experiments. It is found that a considerable retardation in tip vortex cavitation can be achieved with attachment of end-plates at the tip of the stabilizer fin. The results can be utilized for the design of stabilizer fins as well as the development of high performance control devices for ships.

Keywords

References

  1. Akihisa, K.,Kazuaki, W., Hajime, Y., Masatsugu, M., Noriso, I., Shunji, S. and Koyu K., 2002, 'On the mechanism of the bursting phenomena of propeller tip vortex cavitation, Journal of Marine Science and Technology, 6:181-192 https://doi.org/10.1007/s007730200006
  2. Bu, G.T., Han, J.M., Song, I.H. and Sin, S.C., 2003, 'Viscous Flow Analysis for the Rudder Section Using FLUENT Code,' Journal of SNAK, Vol. 30, No. 37, pp. 30-36
  3. Choi, J.E. and Chung S.H., 2005, 'Cavitating Flow Characteristics around a 2-Dimensional Hydrofoil,' Proceeding of the Annual Autumn Meeting, SNAK, pp.119-130
  4. Choi, J.-E., Chung, S.-H. and Lee, D.H, 2007, 'Cavitating Flow Characteristics around a 2-Dimensional Hydrofoil Section,' Journal of SNAK, Vol. 44, No. 2, pp. 74-82 https://doi.org/10.3744/SNAK.2007.44.2.074
  5. 'FLUENT 6.1 user's guide ,' 2005, Fluent Inc.
  6. 'GRIDGEN user manual version 15,' 2003, Pointwise Inc.
  7. Hwang, Y.S. and Park, J.J., 2004, 'A numerical simulation of 2d viscous flows around udder sections considering section type and gap shape,' Proceeding of the Annual Spring Meeting, SNAK, pp. 1070-1075
  8. Jang, Y.H., Choi, Y.B., Lee, S.H., Park, J.S., Kim, S.P. and Park, J.J., 2005, 'A study on the rudder optimization for the improvement rudder cavitation erosion,' Proceeding of the Annual Autumn Meeting, SNAK, pp. 346-351
  9. Lee, S.-J., Seo, J.S. and Han, J.H., 2007, 'Experimental Study on the Cavitation Noise of a Hydrofoil,' Journal of SNAK, Vol. 44, No. 2, pp. 111-118 https://doi.org/10.3744/SNAK.2007.44.2.111
  10. Seo, D.-W., Jeong, S.-W. and Lee, S.-H., 2007, 'Influence of Tail Blades on the Performance of a Fin,' Journal of SNAK, Vol. 44, No. 2, pp. 55-63 https://doi.org/10.3744/SNAK.2007.44.2.055
  11. Song, I.H., Ahn, J.W., Moon, I.S. and Kim, K. S., 2000, 'Influence of the Leading Edge Shape of a 2-Dimensional hydrofoil on Cavitation Characteristics,' Journal of SNAK, Vol. 37, No. 1, pp. 60-66
  12. Wilcox, D. C., 1993, Turbulence Modeling for CFD, DCW Industries

Cited by

  1. A Study to Improve the Performance of a Fixd Type Fin Stabilizer with Coanda Effect vol.37, pp.3, 2013, https://doi.org/10.5394/KINPR.2013.37.3.257
  2. Performance Analysis of Stabilizer Fin Applied Coanda System vol.30, pp.1, 2016, https://doi.org/10.5574/KSOE.2016.30.1.18