Metals and materials international

The Korean Institute of Metals and Materials (대한금속재료학회)
권호 표지

Dilatometric Analysis of Austenite Formation during Intercritical Annealing

Suh, Dong-Woo;Oh, Chang-Seok;Kim, Sung-Joon

  • Published : 20080600
⟨ Previous Next ⟩

Abstract

Dilatometry is a useful method to investigate the transformation kinetics of ferrous alloys. In the present study, a dilatometric analysis procedure that considers the effect of non-isotropic volume change was applied to evaluate the kinetics of austenite formation during the intercritical annealing of TRIP steels. Metallographic analysis was conducted to validate the dilatometric analysis results. The austenite fractions from the dilatometric analysis showed reasonable agreement with those from the metallographic one. This verifies that the kinetics of austenite formation during heat treatment of low carbon TRIP steel can be reliably analyzed with the proposed procedure

Keywords

References

  1. C. Jing, D. W. Suh, C. S. Oh, Z. Wang, and S. J. Kim, Met. Mater. Int. 13, 13 (2007) https://doi.org/10.1007/BF03027817
  2. J. Huang J, W. J. Poole and M. Milizer, Metall. & Mater. Trans. 35A, 3363 (2004)
  3. F. L. G. Oliveira, M. S. Andrade and A. B. Cota AB, Mater. Charac. 58, 256 (2007) https://doi.org/10.1016/j.matchar.2006.04.027
  4. G. R. Speich, V. A. Demarest and R. L. Miller, Metall. Trans. 12A, 1419 (1981)
  5. C. I. Garcia and A. J. DeArdo, Metall. Trans. 12A, 521 (1981)
  6. ASTM International, Designation: A 1033-04 (2004)
  7. J. Zhao, C. Mesplont and B. C. De Cooman, ISIJ Int. 41, 492 (2001) https://doi.org/10.2355/isijinternational.41.492
  8. S. Choi S, Mat. Sci. & Eng. A363, 72 (2003)
  9. T. A. Kop, J. Sietsuma and S. J. Van Der Zwaag, J. Mater. Sci. 36, 519 (2001) https://doi.org/10.1023/A:1004805402404
  10. C. S. Oh, H. N. Han, C. G. Lee, T. H. Lee and S. J. Kim, Met. Mater. Int. 10, 399 (2004) https://doi.org/10.1007/BF03027339
  11. D. W. Suh, C. S. Oh, H. N. Han and S. J. Kim, Acta Mater. 55, 2659 (2007) https://doi.org/10.1016/j.actamat.2006.12.007
  12. D. W. Suh, H. N. Han and S. J. Kim, Mater. Trans. 48, 882 (2007) https://doi.org/10.2320/matertrans.48.882
  13. R. A. Jaramillo, M. T. Lusk, M. C. Mataya, Acta Mater. 52, 851 (2004) https://doi.org/10.1016/j.actamat.2003.11.017
  14. R. A. Jaramillo and M. T. Lusk, Acta Mater. 52, 859 (2004) https://doi.org/10.1016/j.actamat.2003.10.020
  15. R. G. Stringfellow, D. M. Parks and G. B. Olson, Acta Metall. Mater. 40, 1703 (1992) https://doi.org/10.1016/0956-7151(92)90114-T
  16. S. Denis, S. Sjostrom, A. Simon, Metall. Trans. A 18, 1203 (1987) https://doi.org/10.1007/BF02647190
  17. H. N. Han, J. K. Lee, D. W. Suh and S. J. Kim SJ, Phil. Mag. 87, 159 (2007) https://doi.org/10.1080/14786430600953731
  18. S. J. Kim, C. G. Lee, T. H. Lee and C. S. Oh CS, ISIJ Int. 42, 1452 (2002) https://doi.org/10.2355/isijinternational.42.1452
  19. Thermo-Calc Software, User's Guide, Version Q
  20. G. W. Greenwood and R. H. Johnson, Proc. Roy. Soc. A 238, 403 (1965)
  21. J. Agren, Acta Metall. 30, 841 (1982) https://doi.org/10.1016/0001-6160(82)90082-7