International journal of steel structures (국제강구조저널)

Korean Society of Steel Construction (한국강구조학회)
권호 표지

Analytical Models for the Initial Stiffness and Plastic Tensile Load Capacity of a Double Angle Connection Subjected to Tension

Yang, Jae-Guen;Jeon, Seong-Sam

  • Published : 2008.09.10
⟨ Previous Next ⟩

Abstract

This study has been performed to establish the effects of bolt gage distance and number of bolts on the stiffness and strength of a double angle connection under tension. In addition, analytical models have been proposed to predict the initial stiffness and plastic tensile load capacity of a double angle connection under tension. The effects of prying action have been included in the development of these analytical models. The results obtained from these analytical models have been compared with those obtained from the Thornton model and the Faella model to verify their applications. Six experimental tests have been performed to obtain load-displacement curves of a double angle connection under tension

Keywords

References

  1. American Institute of Steel Construction (AISC) (2001). Manual of steel construction. 3rd Ed., vols. 1-2, Chicago
  2. Astaneh, A. (1985). 'Procedure for design and analysis of hanger-type connections.' Engng J AISC, Vol. 22, pp. 63-6
  3. Ballio, G., and Mazzolani, F.M. (1994). 'Strutture in Acciaio.' Hoepli, Milan.
  4. Chen, W. F. (1987). Joint flexibility in steel frames. Elsevier Applied Science
  5. Chen, W. F., and Lui, E. M. (1991). Stability design of steel frames. CRC Press
  6. Faella, C., Piluso, V., and Rizzano, G. (1996). 'Prediction of the flexural resistance of bolted connections with angles.' IABSE Colloquium on semi-rigid structural connections, pp. 25-7
  7. Faella, C., Piluso, V., and Rizzano, G. (1998). 'Experimental analysis of bolted connections: Snug versus preloaded Bolts.' J Struct Engng ASCE, Vol. 124, pp. 765-74 https://doi.org/10.1061/(ASCE)0733-9445(1998)124:7(765)
  8. Faella, C., Piluso, V., and Rizzano, G. (2000). Structural steel semi-rigid connections : Theory, design and software. CRC Press
  9. Hong, K., Yang, J. G., and Lee, S. K. (2001). 'Parametric study of double angle framing connections subjected to shear and tension.' J Construct Steel Res, Elsevier Science Ltd, Vol. 57, pp. 997-1013 https://doi.org/10.1016/S0143-974X(01)00019-0
  10. Jaspart, J. P. (1991) Etude de la Semi-rigidite des Noeuds Poutre-Colonne et son Influence sur la Resistance et la Stabilite des Ossatures en Acier, Ph. D. Thesis, University of Liege, Belgium
  11. Jaspart, J. P., and Maquoi, R. (1991). 'Plastic capacity of end-plate and flange cleated connections - prediction and design rules.' Second International Workshop on Connection in Steel Structures, Pittsburgh, USA
  12. Jaspart, J. P., Steenhuis, M., and Weinand, K. (1995). 'The stiffness model of Revised Annex J of Eurocode 3.' Third International Workshop on Connection in Steel Structures, Trento, Italy
  13. Kishi, N., and Chen, W. F. (1990). 'Moment-rotation relations of semi-rigid connections with angles.' J Struct Engng, ASCE Vol. 116, pp. 1813-34 https://doi.org/10.1061/(ASCE)0733-9445(1990)116:7(1813)
  14. Lachal et al. (2006). 'Experimental and analytical investigations of bolted haunched beam-to-column joints with a view of seismic design.' Int J of Adv Steel Construction, Vol. 2, pp. 137-61
  15. Lorenz, R. F., Kato, B., and Chen, W. F. (1992). Semi-rigid connections in steel frames. CTBUH. McGraw-Hill
  16. Richard, R. M., and Abbott, B. J. (1975). 'Versatile elasticplastic stress-strain formula.' J Eng Mech Div ASCE, 101(EM4), pp. 511-15
  17. Richard, R. M., Hsia, W. K., and Chmielowiec, M. (1988) 'Derived moment rotation curves for double framing angles.' Comput & Struct, Elsevier Science Ltd, Vol. 3, pp. 485-94
  18. Salmon, C.G., and Johnston, J. E. (1998). Steel structures: design and behavior. 4th ed. Harper Collins
  19. Stefano, De., and Astaneh, A. (1991). 'Axial forcedisplacement behavior of steel double Angles.' J Construct Steel Res, Elsevier Science Ltd, Vol. 20, pp. 161-81 https://doi.org/10.1016/0143-974X(91)90030-5
  20. Thornton, W. A. (1985). 'Prying action-a general treatment.' Engng J, AISC, Vol. 22, pp. 67-75
  21. Thornton, W. A. (1992). 'Strength and serviceability of hanger connections.' Engng J, AISC, Vol. 29, pp. 145-49
  22. Thornton, W. A. (1996). 'A rational approach to design of tee shear connections.' Engng J, AISC, Vol. 33, pp. 34-7
  23. Thornton, W. A. (1997) 'Strength and ductility requirements for simple shear connection with shear and axial load.' Proceedings of National Steel Construction Conference, AISC, Vol. 38, pp. 1-17
  24. Yang, J. G., and Lee, G. Y. (2005) 'Design Specifications for Low-Rise Steel Frames with Double Angle Connections.' Report No. KRF-2005-202-D00530, Korea Research Foundation