References
- T. W. Montemarano, J. Ship Prod. 2, 145 (1986)
- R. E. Dolby, Proc. Int. Workshop on the Innovative Strucrtural materials for Infrastructure in 21st Century, p. 131, NIMS, Tsukuba, Japan (2000)
- N. Yurioka, Proc. First Int. Conf. on Adv. Structural Steels (ICASS 2002), p. 119, NIMS, Tsukuba, Japan (2002)
- E. Takahashi and K. Iwai, J. JWS. 48, 885 (1979)
- J. Vuik, IIW Doc. IX-1686-92 (1992)
- R. J. Pargeter, TWI Report. 461, (1992)
- H. J. Kim, Int. J. KWS. 2, 52 (2002)
- Y. Ito and K. Bessyo, J. JWS. 37, 683 (1968)
- M. McParlan and B. A. Graville, Welding J. 55, 95-s (1976)
- P. H. M. Hart, Welding J. 65, 14-s (1986)
- A. P. Chakaravarti and S. R. Bala, Welding J. 68, 1-s (1989)
- T. Yatake, N. Yurioka, R. Kataoka and E. Tsunerromi, J. JWS. 50, 291 (1981)
- N. Okuda, Welding J. 66, 141-s (1987)
- AWS A4.3-93: AWS, USA (1992)
- D. J. Abson, A. Duncan and R. J. Pageter, IIW Doc. 1533- 88 (1988)
- S. S. Tuliani, Welding Res. Int. 6, 19 (1976)
- V. S. Wright and I. T. Davison, Metal Const. 11, 129 (1979)
- J. M. F. Motta and R. L. Apps, Welding J. 61, 222-s (1982)
- D. J. Allen, B. Chew and P. Harris, Welding J. 61, 212-s (1982)
- G. Jinjin and W. Zuqian, Welding Int. 3, 984 (1989) https://doi.org/10.1080/09507118909449067
- J. H. Kim, J. S. Seo, H. J. Kim , H. S. Ryoo, K. H. Kim and M. Y. Huh, Met. Mater. -Int., 14, 239 (2008) https://doi.org/10.3365/met.mat.2008.04.239
- H. J. Kim and B. Y. Kang, ISIJ Int. 43, 706 (2003) https://doi.org/10.2355/isijinternational.43.706
- J. L. Davidson, S. P. Lynch and A. Majurndar, Pro. of the Conf. on Hydrogen Management in Steel Weldments, p. 21, Defense-Science Technology Organization, Melbourne, Australia, (1996)
Cited by
- 고강도 철강 및 용접부의 수소지연파괴 평가 vol.29, pp.6, 2011, https://doi.org/10.5781/kwjs.2011.29.6.653
- 고강도 용착금속의 미세조직이 저온균열에 미치는 영향 vol.32, pp.1, 2008, https://doi.org/10.5781/jwj.2014.32.1.22
- Effect of martensite on cold cracking in 600-MPa grade flux-cored arc weld metals using the Y-groove test vol.59, pp.5, 2015, https://doi.org/10.1007/s40194-015-0240-5
- Evaluation on Reheat Cracking of Multi-pass Weld Metal of YP 690 QT Steel vol.56, pp.8, 2018, https://doi.org/10.3365/kjmm.2018.56.8.580
- Hydrogen permeation and distribution at a high-strength X80 steel weld under stressing conditions and the implication on pipeline failure vol.46, pp.44, 2008, https://doi.org/10.1016/j.ijhydene.2021.04.115
- The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review vol.11, pp.18, 2021, https://doi.org/10.3390/app11188619