Journal of Industrial and Engineering Chemistry

The Korean Society of Industrial and Engineering Chemistry (한국공업화학회)
권호 표지

Effect of polymer cement modifiers on mechanical and physical properties of polymer-modified mortar using recycled artificial marble waste fine aggregate

Hwang, Eui-Hwan;Ko, Young-Soo;Jeon, Jong-Ki

  • Published : 20080300
⟨ Previous Next ⟩

Abstract

Various polymer-modified mortars using recycled artificial marble waste fine aggregate (AMWFA) were prepared and investigated for the purpose of feasibility of recycling. Styrene-butadiene rubber (SBR) latex and polyacrylic ester (PAE) emulsion were employed as polymer modifier, and compared each other. The replacement ratio of AMWFA was also changed to investigate the effect of it on physical properties. Adding polymer cement modifier into mortar reduced water-cement ratio, and PAE was the more effective polymer cement modifier to reduce water-cement ratio than SBR. PAE emulsion-modified mortar increased the air content entrained as the proportion of PAE was increased. There was little difference in water absorption between SBR latex and PAE emulsion. The compressive strength decreased in the presence of polymer cement modifiers compared to that of no polymer cement modifiers, but the compressive strength of 20% of polymer-cement ratio was higher than that of 10%. After the hot water resistance test, both compressive strength and flexural strength were decreased. (C) 2007 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.

Keywords

References

  1. H.K. Lee, H.S. Kim, J. Korean Ind. Eng. Chem. 14 (2003) 622
  2. W.I. Kim, H.j. Kim, I.K. Hong, J. Korean Ind. Eng. Chem. 11 (2000) 220
  3. E.H. Hwang, T.S. Hwang, J. Ind. Eng. Chem. 13 (2007) 585
  4. H.S. Park, C.G. Kim, S.J. Kim, J. Ind. Eng. Chem. 12 (2006) 216
  5. E.H. Hwang, Y.S. Ko, J.K. Jeon, J. Ind. Eng. Chem. 13 (2007) 387
  6. W.T. Kuo, K.L. Lin,W.C. Chang, H.L. Luo, J. Ind. Eng. Chem. 12 (2006) 702
  7. M.J.P. Slapak, J.M.N. van Kasteren, A.A.H. Drinkenburg, Resour. Conserv. Recycling (2000) 81
  8. W. Kaminsky, J.S. kim, J. Anal. Appl. Pyrol. 51 (1999) 127 https://doi.org/10.1016/S0165-2370(99)00012-1
  9. H.T. Kim, S.C. Oh, J. Ind. Eng. Chem. 11 (2005) 648
  10. E.H. Hwang, D.S. Kil, B.K. Lee, B.J. Lee, J. Korea Soc.Waste Manage. 19 (2002) 553
  11. K. Demura, Y. Ohama, T. Satoh, in: Proceedings of the International RILEM Workshop on Disposal and Recycling of Organic and Polymeric Construction Materials, E and FN Spon, London, (1995), p. 169
  12. Y. Ohama, N.W. Choi, in: Mortars, Asphalt, Ferreira, Fernandes, Marques (Eds.), Proceedings of the International Conference on Polymer Concrete, University of Porto, Portugal, (2002), p. 161
  13. J.H. Lee, H.G. Kim, J.S. Shin, C.H. Kang, J. Korean Ind. Eng. Chem. 13 (2002) 588
  14. Y.K. Yang, T.S. Hwang, S.M. Kim, N.S. Kwak, E.H. Hwang, J. Korean Ind. Eng. Chem. 15 (2004) 786
  15. Y.N. Chun, S.I. Kim, J. Ind. Eng. Chem. 12 (2006) 552
  16. C.G. Lee, S.H. Kang, J.S. Kim, J.S. Yun, Y. Kang, M.J. Choi, J. Korean Ind. Eng. Chem. 15 (2004) 188
  17. E.H. Hwang, D.S. Kil, J.Y. Shin, T.S. Hwang, S.H. Yang, in: N. Laksmanan, C.V. Vaidyanathan, Y. Ohama, M. Neelamegam (Eds.), Proceedings of the Fifth Asian Symposium on Polymers in Concrete, Chennai, India, (2006), p. 323
  18. E.H. Hwang, D.S. Kil, T.S. Hwang, J. Korean Ind. Eng. Chem. 11 (2000) 792
  19. E.H. Hwang, T.S. Hwang, D.S. Kil, J. Korean Ind. Eng. Chem. 10 (1999) 1066
  20. E.H. Hwang, D.S. Kil, I.S. Oh, J. Korean Ind. Eng. Chem. 8 (1997) 979
  21. Y. Ohama, in: N. Laksmanan, C.V. Vaidyanathan, Y. Ohama, M. Neelamegam (Eds.), Proceedings of the Fifth Asian Symposium on Polymers in Concrete, Chennai, India, (2006), p. 3
  22. K.S. Yeon, in: N. Laksmanan, C.V. Vaidyanathan, Y. Ohama, M. Neelamegam (Eds.), Proceedings of the Fifth Asian Symposium on Polymers in Concrete, Chennai, India, (2006), p. 13
  23. Y. Ohama, K. Shiroishida, SP-89, American Concrete Institute, 1985,, p. 313
  24. Y. Ohama, in: Franco Sandrolini (Ed.), Proceedings of the Nineth International Symposium on Polymers in Concrete, Bologna, Italy, (1998), p. 1
  25. D.W. Fowler, G.W. Depuy, in: D. Van Gemert, K.U. Leuven (Eds.), Proceedings of the Eighth International Symposium on Polymers in Concrete, Oostende, Belgium, (1995), p. 67
  26. R.N. Swamy, in: D. Van Gemert, K.U. Leuven (Eds.), Proceedings of the Eighth International Symposium on Polymers in Concrete, Oostende, Belgium, (1995), p. 21
  27. E.H. Hwang, T.S. Hwang, Y. Ohama, J. Korean Ind. Eng. Chem. 5 (1994) 786
  28. E.H. Hwang, T.S. Hwang, E. Kamada, J. Korean Ceramic Society 31 (1994) 949
  29. Y. Ohama, Concrete Admixtures Handbook, Noyes Publication, New Jersey, 1984, p. 337
  30. Hashimoto, Y. Ohama, The International of the College of Engineering of Nihon University, Series A, 19, 1987, p. 113
  31. R.N. Swamy, H. Nagao, in: D. Van Gemert, K.U. Leuven (Eds.), Proceedings of the Eighth International Symposium on Polymers in Concrete, Oostende, Belgium, (1995), pp. 257-262
  32. Y. Ohama, M. Miyake, in: D. Van Gemert, K.U. Leuven (Eds.), Proceedings of the Eighth International Symposium on Polymers in Concrete, Oostende, Belgium, (1995), p. 331
  33. Y.K. Jo, Y. Ohama, K. Demura, in: K.S. yeon, J.D. Choi (Eds.), Proceedings of the First Asian Symposium on Polymers in Concrete, Chuncheon, Korea, (1994), p. 231
  34. E. Sakai, J. Sugita, Cement Concrete Res. 25 (1995) 127 https://doi.org/10.1016/0008-8846(94)00120-N
  35. N.F.O. Evbuomwan, in: H. Yiun-Yuan, W. Keru, C. Zhiyuan (Eds.), Proceedings of the Sixth International Symposium on Polymers in Concrete, Shanghai, China, (1990), p. 52
  36. E. Semerad, P. Kremnitzer, W. Lacom, F. Holub, P. Sattler, in: B.W. Staynes (Ed.), Proceedings of the Fifth International Symposium on Polymers in Concrete, Brighton, England, (1987), p. 223