DOI QR코드

DOI QR Code

Characteristics of Water Leakage from Cooling Components in a Storage Ring

방사광 차단용 진공부품의 냉각수 누설 특성

  • Park, C.D. (Vacuum Lab., Pohang Accelerator Laboratory)
  • 박종도 (포항가속기연구소 진공 연구실)
  • Published : 2008.01.30

Abstract

We analyzed the characteristics of water leakage from cooling components of the storage ring in the Pohang Light Source. The water leaks led localized pressure bumps and abnormal pressure changes. The leakage also changed the residual gas compositions depending not only on the position between leakage place to gas analyzer but also on on/off switching of ion pump and electron beam. We found that the residual gas analysis of $CH_4$, CO, NO was useful in determining water leaks.

포항가속기연구소 저장링에 설치된 방사광 차단용 진공부품에서 냉각수가 누설되었을 때의 진공도 분포, 압력 변화, 잔류 기체의 변화 등을 측정하여 그 특성을 분석하였다. 냉각수 누설 시에 압력 상승은 국부적으로 나타났으며 잔류 기체의 변화 양상은 누설 위치로부터 잔류기체 분석기까지 거리와 이온펌프 및 전자빔의 On/Off에 따라서 크게 달랐으며 특정 기체의 선택적 상승도 나타났다. 냉각수 누설의 발견은 전압변화 측정으로 가능하였으며 잔류기체 분석기로는 물분자를 직접 측정하기보다는 $CH_4$, CO, NO 등 특성 기체의 증가를 분석함으로 누설 여부를 판단할 수 있었다.

Keywords

References

  1. C. D. Park, K. H. Kil, C. K. Kim and S. M. Chung, American Institute of Physics Conference Proceding, No 236 (AIP, New York, USA, 1990), p. 202
  2. K. H. Gil, C. K. Kim, and C. W. Chung, J. Kor. Vac. Soc. 16, 46 (2007) https://doi.org/10.5757/JKVS.2007.16.1.046
  3. 배석희,인상렬,정광화,이영백,신용현,"진공공학", 한국경제신문 (2000)
  4. C. D. Park, Y. J. Han, H. J. Kim, H. S. Youn and W. C. Choi, J. Kor. Vac. Soc. 1, 336 (1992)
  5. J. M. Lafferty, "Foundation of Vacuum Science and Technology", John Wiley & Sons, Inc. p. 472, 638 (1998)
  6. M. H. Hablanian, "High-Vacuum Technology. A practical guide", Marcel Dekker, Inc. p.451 (1990)
  7. C. D. Park, Y. J. Han, C. K. Kim, and S. M. Chung, Proceedings of the 1997 Particle Accelerator Conference PAC97, (IEEE, Piscataway, USA, 1997), p. 3633
  8. J. Miertusova, F. Giacuzzo, F. Daclon, Proceedings of the 1994 European Particle Accelerator Conference EPAC94, p. 2470

Cited by

  1. Magnetic Permeability Measurement of Stainless Steels in Vacuum Chamber Fabrication vol.19, pp.6, 2010, https://doi.org/10.5757/JKVS.2010.19.6.460