References
- Korea Institute of Nuclear Safety(KINS), 2004, "Evaluation of the Integrity of the Narrow Gap welds," Regulatory research on the integrity of reactor components, HR-571
-
Huh, Y., Cho, S. K., Koo, J. M. and Seok, C. S., 2007, "Plastic
$\eta$ -factor for Fracture Toughness Test of SA508 Narrow-gap Welds," 2007 Spring Conference of KSME - Kim, Y. J. and Schwalbe, K. H., 2001, "Mismatch Effect on Plastic Yield Loads in Idealised Weldments I- Weld Center Cracks," Engineering Fracture Mechanics, Vol.68, pp.163-182 https://doi.org/10.1016/S0013-7944(00)00093-X
- Kim, Y. J. and Schwalbe, K. H., 2001, "Mismatch Effect on Plastic Yield Loads in Idealised Weld- ments II- Heat Affected Zone Cracks," Engineering Fracture Mechanics, Vol.68, pp.183-199 https://doi.org/10.1016/S0013-7944(00)00094-1
- Song, T. K., Oh, C. K., Kim, Y. J., Kim, J. S. and Jin, T. E., "Elastic-Plastic Fracture Mechanics Analyses For Circumferential Part-Through Surface Cracks At The Interface Between Elbows and Pipes," KSME(A), Vol. 31, No. 6, pp. 710-717 https://doi.org/10.3795/KSME-A.2007.31.6.710
- ASTM, 2001, Standard Test Methods for Tension Testing of Metallic Materials, ASTM E8-01
- Huh, Y., 2008, "A Study on the Evaluation of the Fracture Toughness for the Narrow Gap Welding," Doctoral thesis of Sungkyunkwan University
- 2007, "ABAQUS User''s manual," SIMULIA Inc
- Park, B. G., Oh, C. K., Kim, Y. J., Kim, Y. J., Kim, Y. S. and Jin, T. E., 2004, "The Analysis of Circumference Through-Wall Cracked Pipe Considering Weld Characteristic," 2004 Spring Conference of KSME
- Hao, S., Schwalbe, K. H. and A, Cornec., 2000, "The Effect of Yield Strength Mis-Match on the Fracture Analysis of Welded Joints: Slip-Line Field Solutions for Pure Bending," International Journal of Solids and Structures 37, pp. 5385-5411 https://doi.org/10.1016/S0020-7683(99)00246-2
Cited by
- A Study on the Evaluation of the Fracture Toughness for the Narrow Gap Welding Part of Nuclear Piping vol.34, pp.1, 2010, https://doi.org/10.3795/KSME-A.2010.34.1.67