Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Gravure Offset Printing for Printed Electronics

인쇄전자를 위한 그라비아 옵셋 인쇄

  • 김충환 (한국기계연구원 나노기계연구본부) ;
  • 최병오 (한국기계연구원 나노기계연구본부) ;
  • 류병순 (한국기계연구원 나노기계연구본부) ;
  • 김동수 (한국기계연구원 나노기계연구본부)
  • Published : 2008.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology, with low cost and high productivity, can make it possible to produce printed electronics such as TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatus of gravure-offset printing are developed for fine line-width/gap printing and the results obtained from the apparatus shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. The roll-to-roll printing system for fine line-width printing based on primary experiment is presented. The printing results obtained from the system shows around 30 micro-meter line-width/gap printing patterns.

Keywords

References

  1. Choi, B. O., Kim, D. S., Lee, T. M., Kim, C. H., Lee, M. H., Jo, J. D. and Lim, K. J., "Study on the Roll Printing Process for Fine Line-width Printing," KSME Fall Annual Meeting, pp. 926-930, 2005
  2. Kim, C. H., Ryu, B. S., Lee, T. M., Yun, S. N., Choi, B. O., Lim, K. J. and Lee, M. H., "Development of Roll-to-Roll Printing System for Fine Line-width Printing," KSPE Spring Annual Meeting, pp. 569-570, 2006
  3. Pudas, M., Hagberg, J. and Leppavuori, S., "Gravure offset printing of polymer inks for conductors," Progress in Organic Coatings, Vol. 49, No. 4, pp. 324-335, 2004 https://doi.org/10.1016/j.porgcoat.2003.09.013
  4. Makela, T., Jussila, S., Vilkman, M., Kosonen, H. and Korhonen, R., "Roll-to-roll method for producing polyaniline pattern on paper," Synthetic Metals, Vol. 135, pp. 41-42, 2003 https://doi.org/10.1016/S0379-6779(02)00753-1
  5. Ramsey, B. J., Evans, P. S. A. and Harrison, D., "A novel circuit fabrication technique using offset lithography," J. Electronic Manufacturing, Vol. 7, No. 1, pp. 63-68, 1997 https://doi.org/10.1142/S0960313197000075
  6. Harrey, P. M., Evans, P. S. A., Ramsey, B. J. and Harrison, D. J., "Intedigitated capacitors by offset lithography," J. Electronic Manufacturing, Vol. 10, No. 1, pp. 69-77, 2000 https://doi.org/10.1142/S096031310000006X
  7. Becker, E., Johannes, H. H., Benstem, T., Dobbertin, T., Heithecker, D., Metzdorf, D., Neuner, H. and Kowalsky, W., "A New Structuring Technique for Polymer Integrated Circuits," 1st International IEEE Conference on Polymers and Adhesives in Microelectronics and Photonics, pp. 95-97, 2001
  8. Kim, C. H., Lee, T. M., Kim, D. S. and Choi, B. O., "Distortion of Printed Patterns in Printed Electronics," Journal of KSPE, Vol. 24, No. 8. pp. 74-80, 2007