The KSFM Journal of Fluid Machinery (한국유체기계학회 논문집)

Korean Society for Fluid machinery (한국유체기계학회)
권호 표지
DOI QR코드

DOI QR Code

Design Optimization of Centrifugal Pump Impeller Using DOE

실험계획법을 사용한 원심펌프 임펠러 최적설계

  • 김성 (한양대학교 대학원/한국생산기술연구원) ;
  • 최영석 (한국생산기술연구원 열유체시스템팀) ;
  • 윤준용 (한양대학교 기계공학과) ;
  • 김덕수 (효성에바라(주) 기술연구소)
  • Published : 2008.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the performance characteristics of the impeller in a centrifugal pump were investigated using DOE(Design of Experiment) with commercial CFD software. Geometric parameters of vane plane development were defined with the meridional shape and frontal view of the impeller. The incidence angles and the exit blade angle were selected as main parameters using 2k factorial and the influences of selected design parameters were examined through the optimization process using RSM.

Keywords

References

  1. A. J. Stepanoff., 1957, "Centrifugal and Axial Flow Pumps."
  2. Imaichi, K. and Murakami, Y. and Tsurusaki, H. and Cho, K. R., 2002, "The Basis of Pump Design."
  3. 김 성, 최영석, 이경용, 윤준용, 2007, "자오면 고정형상에서 날개각 분포가 원심펌프성능에 미치는 영향," 대한설비공학회 하계학술대회 발표논문집, pp. 21-26
  4. 김덕수, 최영석, 전상규, 윤준용, 2005, "벌루트 형상이 원심펌프의 성능에 미치는 영향에 대한 수치해석적 연구," 2005 유체기계연구개발발표회 논문집 pp. 497-502
  5. Myers, R. H. and Montgomery, D.C., 2001, "Response Surface Methodology," Wiley Interscience Publication
  6. 이상복, 2001, "NINITAB을 활용한 예제 중심의 실험계획법," 이레이크
  7. 박성현, 2003, "현대실험계획법," 민영사
  8. 최영석, 김 성, 김선창, 2006, "반응표면기법을 이용한 자동세차기 노즐시스템의 최적설계," 제4회 한국유체공학학술대회 논문집 pp. 357-360
  9. 정욱희, 최영석, 권오명, 이경용, 2007, "CFD 및 DOE를 활용한 자동세차기 노즐시스템의 최적설계," 유체기계저널, 제10권 제5호, pp. 34-40 https://doi.org/10.5293/KFMA.2007.10.5.034

Cited by

  1. vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.059
  2. Effect of Surface Roughness on Performance Analysis of Centrifugal Pump for Wastewater Transport vol.38, pp.2, 2014, https://doi.org/10.3795/KSME-B.2014.38.2.147
  3. Shape Optimization of Impeller Blades for 15,000 HP Centrifugal Compressor Using Fluid Structural Interaction Analysis vol.38, pp.6, 2014, https://doi.org/10.3795/KSME-B.2014.38.6.547
  4. Optimum design and performance of marine sea water pump with impeller using CFRP vol.16, pp.11, 2015, https://doi.org/10.5762/KAIS.2015.16.11.7878
  5. Development of Drainage Pump for Rescue Sinking Ship vol.39, pp.3, 2015, https://doi.org/10.5916/jkosme.2015.39.3.248
  6. Shape Optimization of High Power Centrifugal Compressor Using Multi-Objective Optimal Method vol.39, pp.5, 2015, https://doi.org/10.3795/KSME-B.2015.39.5.435
  7. CFD Analysis of Submersible Slurry Pump with Two Blades vol.35, pp.3, 2011, https://doi.org/10.3795/KSME-B.2011.35.3.263
  8. Effects of Impeller Shape of Submersible Nonclogging Pump on its Performance vol.36, pp.12, 2012, https://doi.org/10.3795/KSME-B.2012.36.12.1201