Belt Pattern Making for Hip-hugger garment using 3D Body Scan Data

3차원 인체 스캔 데이터를 활용한 Hip-hugger 의류용 벨트 패턴 설계

  • Park, Soon-Jee (School of Textiles, Yeungnam University) ;
  • Choi, Sin-Ae (Department of Clothing & Fashion, Graduate School, Yeungnam University)
  • 박순지 (영남대학교 섬유패션학부) ;
  • 최신애 (영남대학교 대학원 의류패션학과)
  • Received : 2008.03.20
  • Accepted : 2008.10.20
  • Published : 2008.10.31

Abstract

This study was designed to testify the possibility and devise the method to manipulate the 3D body scan data to produce rounded-belt pattern adaptable to hip-type variation of women in their 20's. The results of this research were as follows : Firstly, based on drop-value distribution of hip and waist girth, 151 subjects were classified into three hip-types; Type 1 (15.23%) was 'cylinder type', showing lowest drop-value, Type 2 (69.54%) was 'average type' and Type3 (15.23%) was 'hourglass type' showing highest drop-value. Secondly, using CAD program, design lines for round shape belt were set on the surface of 3D scan data of representative subject of each type. And divided 3D surfaces were flattened onto the plane by the internal tools of CAD program. The measure, 'lifting value of round belt pattern', implying the level of curve ratio of pattern was higher in back than front. This result might be linked to the fact that the hip part is more protruded than the abdomen part. And the measures also showed highest values in Type 3(hourglass type) and lowest in Type 1(cylinder type), meaning that the pattern of Type 3 showed more rounded shape than that of Type 1. This finding implied that round belt for body type having high drop-value should be shaped more curved. Thirdly, difference ratios of outline length and area between 3D curves(body surface) and 2D plane(pattern) were 4.5% and 1.3%, respectively. This result demonstrated and solidified the feasibility of designing digital garment pattern from 3D body scan data.

Keywords

References

  1. 김혜경, 권숙희, 이숙녀, 김순자, 전은경, 박은주, 조정미, 서추연. (1998). 피복인간공학 실험설계방법론, 서울: 교문사
  2. 박순지.(1998). 20대 여성의 하반신 체형분석에 의한 슬랙스 원형설 계에 관한 피복인간 공학적 연구. 연세대학교 대학원 박사학위 논문
  3. 산업자원부 기술표준원. (2005). 제5차 한국인 인체치수 조사자료. 57-59
  4. 이혜영. (1993). 기성복제작을 위한 표준치수체계의 설정에 관한 연 구. 이화여자대학교 대학원 석사학위논문
  5. 정연희, 홍경희, 김시조. (2005). Triangle Simplification에 의한 3D 인체형상분할과 삼각조합방법에 의한 2D 패턴구성. 한국의류학회, 29(9), 1359-1368
  6. 조영한, 박정환, 김재현, 박순지, 서추연, 김태규, 이희정. (2007). 3차 원 인체 스캔 데이터를 이용한 의복패턴 생성에 관한 연구. 한 국정밀공학회, 2007년도 추계학술대회논문집
  7. 조정미. (1992). 한국 미혼여성의 하반신체형 분석과 체형변인이 플 레어스커트 입체성능에 미치는 영향. 연세대학교 대학원 박사학 위논문
  8. Park S. J., & Miyoshi. M. (2003). Development of Theory and Auto CAD Program for Designing the Individual Bodice Pattern from 3D Scanning Data of Human Body. Journal of ARAHE, 10(4), 216-225
  9. 文化女子大學被服構成學硏究室編. (1985). 被服構成學 理論編, 東京: 文化出版局
  10. 朴淳志. (2003). 人體の三次元スキャニングデ-タから上半身原 型の設計のための理論開發. 文化女子大學 論文博士學位 論文