Abstract
The panels are used as a composite part of the completed deck. They replace the main bottom transverse deck reinforcement and also serve as a form surface for the cast-in-place concrete upper layer that contains the top of deck reinforcement. In this paper, three types of the detail for joints was selected and their structural performance in terms of strength and crack contral was investigated through static tests on composite beams. Form the results, the validity of loop joints for continuity of half-depth precast deck was observed and especially an overlapping length of loop joint and transverse reinforcement were checked. The results suggest that increasing the loop overlapping length increases the flexural strength of half-depth precast deck with loop joints. In terms of crack contral, the loop joint with transverse reinforcement showed better performance.
프리캐스트 패널은 교량바닥판의 합성 구조부재로서 사용된다. 프리캐스트 패널의 횡방향 철근은 교량바닥판의 주철근 역할을 하며, 또한 패널 상부의 현장타설 콘크리트 시공시 거푸집 대용으로도 적용된다. 이 논문에서 3가지 이음부 형상을 적용한 합성보 시험체에 대해서 정적실험을 수행하여 강도 및 균열폭을 검토하였다. 실험결과, 루프이음을 적용한 반단면 프리캐스트 부재의 연속성이 우수함을 확인하였고, 루프이음의 겹이음 길이와 횡방향 보강철근의 영향도 검토하였다. 루프이음의 겹이음 길이가 증가할수록 루프이음 반단면 프리캐스트 부재의 휨강도가 증가하였다. 또한, 루프이음부에 횡방향 보강철근은 균열제어에 매우 효율적임을 확인하였다.