Applying Axiomatic Design to Design Evaluation of a Deep-Sea Manganese Nodule Miner

공리적 설계를 적용한 심해저 망간단괴 집광시스템의 설계평가

  • Choi, Jong-Su (Ocean Engineering Research Department, Maritime & Ocean Engineering Research Institute, KORDI) ;
  • Hong, Sup (Ocean Engineering Research Department, Maritime & Ocean Engineering Research Institute, KORDI) ;
  • Kim, Hyung-Woo (Ocean Engineering Research Department, Maritime & Ocean Engineering Research Institute, KORDI) ;
  • Yeu, Tae-Kyung (Ocean Engineering Research Department, Maritime & Ocean Engineering Research Institute, KORDI) ;
  • Lee, Tae-Hee (School of Mechanical Engineering, Hanyang University)
  • 최종수 (한국해양연구원 해양시스템안전연구소 해양시스템연구부) ;
  • 홍섭 (한국해양연구원 해양시스템안전연구소 해양시스템연구부) ;
  • 김형우 (한국해양연구원 해양시스템안전연구소 해양시스템연구부) ;
  • 여태경 (한국해양연구원 해양시스템안전연구소 해양시스템연구부) ;
  • 이태희 (한양대학교 기계공학부)
  • Published : 2008.08.31

Abstract

The conceptual design evaluation of Deep-Sea Manganese Nodule Miner(DSNM) based on Axiomatic Design was preformed. Functional Requirements(FRs) in functional domain and Design Parameters(DPs) in physical domain were embodied for the given concept design of DSNM. Interactions between FRs and DPs were sequentially analyzed from the first level hierarchy to the lower level hierarchy. The interactions were expressed as design matrices which showed the dependence or independence between FRs and DPs. The results showed that the design of DSNM was not a coupled one, but a decoupled. Finally, it was conceptually verified that DSNM was a good design satisfying the independence axiom of the Axiomatic Design.

심해저 망간단괴 집광시스템(이하, 집광시스템)의 개념설계가 공리적 설계(Axiomatic Design)의 관점에서 평가되었다. 또한 이미 수행된 집광시스템의 개념설계에 대해 기능적 영역의 기능요구와 물리적 영역의 설계파라미터가 구체화되었다. 기능요구와 설계파라미터의 상호관계는 첫 번째 수준 계층에서 하위 수준 계층으로 순차적으로 분석되었다. 이러한 상호관계는 설계행렬의 형태로 표현되었고 기능요구와 설계파라미터 사이의 독립성을 판단하기 위한 지표로 사용되었다. 설계행렬의 분석결과 본 집광시스템은 설계파라미터간에 연성이 되지 않는 비연성화된 설계임이 확인되었다. 결과적으로, 본 집광시스템은 독립공리(Independence Axiom)를 만족하는 잘된 설계임이 개념적으로 입증되었다.

Keywords

References

  1. 박경진, 강병수, 2007. 해석적 설계방법론, 동명사, 21−104 pp
  2. 호리베 요시오, 오마찌 호꾸이찌로, 간노 마사요시, 1987. 해양광물자원, 겸지사, 28-56 pp
  3. 홍 섭, 1995a, 심해저 광물자원 개발기술 및 환경보존 연구 : 심해저 망간단괴 집광 및 채광운용시스템 개발연구, 과학기술부, i-iii pp
  4. 홍 섭, 1995b, 심해저 광물자원 개발기술 및 환경보존 연구 : 심해저 망간단괴 집광 및 채광운용시스템 개발연구, 과학기술부, 37-62 pp
  5. 홍 섭, 1997, 심해저 광물자원 개발기술 및 환경보존 연구 : 심해저 망간단괴 집광 및 채광운용시스템 개발연구, 과학기술부, 57-130 pp
  6. 홍 섭, 1999, 심해저 광물자원 개발기술 및 환경보존 연구 : 심해저 망간단괴 집광 및 채광운용시스템 개발연구, 과학기술부, 37-354 pp
  7. Chung, J.S., 1996. Deep-ocean Mining: Technologies for Manganese Nodules and Crusts, Int. J. of Offshore and Polar Eng., ISOPE, 6(7): 244-254
  8. Chung, J.S., 1999. Deep-Ocean Mining Issues and Ocean Mining Working Group (OMWG), Proc. of ISOPE OMS-1999 Symp., ISOPE, pp. 14-17
  9. Chung, J.S., 2003. Deep-ocean Mining Technology: Learning Curve I, Proc. of ISOPE OMS-2003 Symp., Japan, ISOPE, pp. 1-6
  10. Deepak, C.R., Shajahan, M.A., Atmanand, M.A., Annamalai, K., Jeyamani, R., Ravindran, M., Schulte, E., Handschuh, R., Panthel, J., Grebe, H. and Schwarz, W., 2001. Developmental tests on the Underwater Mining System Using Flexible Riser Concept, Proc. of ISOPE OMS-2001 Symp., ISOPE, pp. 94-98
  11. Gong, D., Yang, N. and Yu, M., 2003. Development of Control System of COMRA's Deep Sea Miner, Proc. of ISOPE PACOMS-2005 Symp., ISOPE, pp. 75-80
  12. Suh, N.P., 1990. The Principle of Design, Oxford University Press, 25-95 pp
  13. Yamada, H. and Yamazaki, T., 1998. Japan's Ocean Test of Nodule Mining System, Proc. of 8th ISOPE Conf., ISOPE, pp. 13-19
  14. Yamazaki, T. and Park, S.H., 2005. Economic Validation Analyses of Japan's Nodule, Crust, and Kuroko-type SMS Mining in 2004, Proc. of ISOPE OMS-2005 Symp., ISOPE, pp. 65-70
  15. Yang, K. and El-Haik, B., 2003. Design for Six Sigma, McGraw Hill, 199-233 pp