한국전기전자재료학회논문지 (Journal of the Korean Institute of Electrical and Electronic Material Engineers)

  • 제21권6호
  • /
  • Pages.562-568
  • /
  • 2008
  • /
  • 1226-7945(pISSN)
  • /
  • 2288-3258(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

정공주입층에 따른 OLED 소자의 발광 특성

Emission Properties of OLED Devices with Various Hole Injection Materials

  • 발행 : 2008.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the hole injection layer(HIL) materials have been synthesized and analyzed. Their HOMO levels are $4.93{\sim}5.22\;eV$, and their energy band gaps are $2.74{\sim}3.19\;eV$. Their glass transition temperatures($T_g$) are all above $114^{\circ}C$, which implies that they are highly thermal-stable. The green OLED devices with a structure of ITO(150 nm)/NEW_HIL(50 nm)/NPB(30 nm)/$Alq_3$(50 nm)/Al:Li(100 nm) were fabricated and tested, incorporating these newly synthesized HIL materials. According to the test results of OLED devices, the I-V-L performances of these devices increase in the following sequence: ELM307 > ELM200 > ELM321 > ELM327 > ELM325. In addition, the OLED device with ELM307 as a HIL has the highest brightness and efficiency at the same driving voltage. These experimental results have shown that ELM307 can be used as one of the most promising candidates for HIL materials.

키워드

참고문헌

  1. C. W. Tang and S. A. VanSlyke, "Organic electroluminescent diodes", Appl. Phys. Lett., Vol. 51, p. 913, 1987 https://doi.org/10.1063/1.98799
  2. 주성후, "SiNx 박막에 의한 OLED 소자의 보호막 특성", 전기전자재료학회논문지, 19권, 8호, p. 758, 2006 https://doi.org/10.4313/JKEM.2006.19.8.758
  3. 김경민, 주성후, "2원 첨가 적색 OLED 소자의 발광 특성", 전기전자재료학회논문지, 20권, 6호, p. 531, 2007 https://doi.org/10.4313/JKEM.2007.20.6.531
  4. C. N. Li, A. B. Djurisic, C. Y. Kwong, P. T. Lai, W. K. Chan, and S. Y. Liu, "Indium tin oxide surface treatments for improvement of organic light-emitting diode performance", Appl. Phys. A, Vol. 80, p. 301, 2005 https://doi.org/10.1007/s00339-003-2146-0
  5. C. W. Tang, S. A. VanSlyke, and C. H. Chen, "Electroluminescence of doped organic thin films", J. Appl. Phys., Vol. 65, p. 3610, 1989 https://doi.org/10.1063/1.343409
  6. L. S. Liao, K. P. Klubek, and C. W. Tang, "High-efficiency tandem organic light- emitting diodes", Appl. Phys. Lett., Vol. 84, p. 167, 2004 https://doi.org/10.1063/1.1638624
  7. C. Adachi, K. Nagai, and N. Tamoto, "Molecular design of hole transport materials for obtaining high durability in organic electroluminescent diodes", Appl. Phys. Lett., Vol. 66, p. 2679, 1995 https://doi.org/10.1063/1.113123
  8. S.-F. Chen and C.-W. Wang, "Influence of the hole injection layer on the luminescent performance of organic light-emitting diodes", Appl. Phys. Lett., Vol. 85, No. 5, p. 765, 2004 https://doi.org/10.1063/1.1775282
  9. S. A. VanSlyke, C. W. Tang, and L. C. Roberts, "Electroluminescent device with organic luminescent medium", US Patent, 4,720,432, 1988
  10. Y. Shirota, Y. Kuwabra, H. Inada, T. Wakimoto, H. Nakada, Y. Yonemoto, S. Kawami, and K. Imai, "Multilayered organic electroluminescent device using a novel starburst molecule, 4,4,4-tris(3-methylphenyl- phenylamino)triphenylamine, as a hole transport material", Appl. Phys. Lett., Vol. 65, p. 807, 1994 https://doi.org/10.1063/1.112238
  11. K. Okumoto and Y. Shirota, "Exciplex formation at the organic solid/solid interface and tuning of the emission color in organic electroluminescent devices", J. Lumin., Vol. 87, p. 1171, 2000 https://doi.org/10.1016/S0022-2313(99)00584-0
  12. Y. Yang and A. J. Heeger, "Polyaniline as a transparent electrode for polymer light- emitting diodes: Lower operating voltage and higher efficiency", Appl. Phys. Lett., Vol. 64, p. 1245, 1994 https://doi.org/10.1063/1.110853
  13. C. Hosokawa, H. Higashi, and T. Kusumoto, "Novel structure of organic electro- luminescence cells with conjugated oligomers", Appl. Phys. Lett., Vol. 62, p. 3238, 1993 https://doi.org/10.1063/1.109085
  14. J. Y. Lee, J.-Y. Park, S.-H. Min, K.-W. Lee, and Y. G. Baek, "A thermally stable hole injection material for use in organic light-emitting diodes", Thin Solid Films, Vol. 515, p. 7726, 2007 https://doi.org/10.1016/j.tsf.2007.03.056
  15. L. Fenenko and C. Adachi, "Influence of heat treatment on indium-tin-oxide anodes and copper phthalocyanine hole injection layers in organic light-emitting diodes", Thin Solid Films, Vol. 515, p. 4812, 2007 https://doi.org/10.1016/j.tsf.2006.11.116