Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Analytical Prediction of Chatter Vibration in Milling Process

밀링 가공 시 채터 진동 예측의 해석적 방법

  • Published : 2009.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the analytical prediction of stability lobes in milling. The stability lobes are obtained by measuring the frequency response function (FRF) of a machining center at the cutting point of the end mill cutter, identifying cutting constants, and approximating cutting force coefficients. The stability lobes are experimentally verified through cutting tests.

Keywords

References

  1. Tobias, S. A., 1965, Machine-Tool Vibration, John Wiley & Sons, Inc., New York
  2. Koenigsberger, F. and Tlusty, J., 1970, Machine Tool Structures Volume 1, Pergamon Press
  3. Merritt, H.E., 1965, “Theory of Self-Exited Machine-Tool Chatter,” Journal of Engineering for Industry, Vol. 87. pp. 447-454 https://doi.org/10.1115/1.3670861
  4. Tlusty, J., 1978, “Analysis of the State of Research in Cutting Dynamics,” Annals of the CIRP, Vol. 27/2, pp. 583-589
  5. Tlusty, J. and Ismail, F., 1981, “Basic Non-Linearity in Machining Chatter,” Annals of the CIRP, Vol. 30/1, pp. 299-304 https://doi.org/10.1016/S0007-8506(07)60946-9
  6. Tlusty, J. and Ismail, F., 1983, “Special Aspects of Chatter in Milling,” Transactions of the ASME, Vol. 105, pp.24-32
  7. Tlusty, J., Zaton, W. and Ismail, F., 1983, “Stability Lobes in Milling,” Annals of the CIRP, Vol. 32/1, pp. 309-313 https://doi.org/10.1016/S0007-8506(07)63411-8
  8. Tlusty, J., 1986, “Dynamics of High-Speed Milling,” Journal of Engineering for Industry, Vol. 108, pp. 59-67 https://doi.org/10.1115/1.3187052
  9. Ioannis Minis, Rafael Yanushevsky, Abel Tembo, 1990, “Analysis of Linear and Nonlinear Chatter in Milling,” Annals of the CIRP, Vol. 39/1, pp. 459-462 https://doi.org/10.1016/S0007-8506(07)61096-8
  10. Tlusty, J., 2000, Manufacturing Processes and Equipment, Prentice Hall
  11. Smith, S. and Tlusty, J., 1990, “Update on High-Speed Milling Dynamics,” Transactions of the ASME, Vol. 112, pp. 142-149 https://doi.org/10.1115/1.2899557
  12. Smith, S. and Tlusty, J., 1991, “An Overview of Modeling and Simulation of the Milling Process,” Journal of Engineering for Industry, Vol. 113, pp. 169-175 https://doi.org/10.1115/1.2899674
  13. Smith, S. and Tlusty, J., 1993, “Efficient Simulation Programs for Chatter in Milling,” Annals of the CIRP, Vol. 42/1, pp. 463-466 https://doi.org/10.1016/S0007-8506(07)62486-X
  14. Smith, S. and Tlusty, J., 1997, “Current Trends in High-Speed Machining,” Transactions of the ASME, Vol. 119, pp. 664-666 https://doi.org/10.1115/1.2836806
  15. Minis, I. and Yanushevsky, R., 1993, “A New Theoretical Approach for the Prediction of Machine Tool Chatter in Milling,” Journal of Engineering for Industry, Vol. 115, pp. 1-8 https://doi.org/10.1115/1.2901633
  16. Altintas, Y. and Budak, E., 1995, “Analytical Prediction of Stability Lobes in Milling,” Annals of the CIRP, Vol. 44, No. 1, pp. 357-362 https://doi.org/10.1016/S0007-8506(07)62342-7
  17. Budak, E. and Altintas, Y., 1998, “Analytical Prediction of Chatter Stability in Milling - Part I: General Formulation,” Transactions of ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 120, pp. 22-30 https://doi.org/10.1115/1.2801317
  18. Budak, E. and Altintas, Y., 1998, “Analytical Prediction of Chatter Stability in Milling - Part II: Application of the General Formulation to Common Milling Systems,” Transactions of ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 120, pp. 31-36 https://doi.org/10.1115/1.2801318
  19. Altintas, Y., 2000, Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations and CNC Design, Cambridge University Press, New York
  20. Altintas, Y., 2001, “Analytical Prediction of Three Dimensional Chatter Stability in Milling,” International Journal of JSME, Section C, Vol. 44, No. 3, pp. 717-723 https://doi.org/10.1299/jsmec.44.717
  21. Tlusty, J., Smith, S. and Winfough, W.R., 1996, “Techniques for the Use of Long Slender End Mills in High-speed Milling,” Annals of the CIRP, Vol. 45/1, pp. 393-396 https://doi.org/10.1016/S0007-8506(07)63088-1
  22. Davies, M.A., Dutterer, B., Pratt, J.R., Schaut, A.J., 1998, “On the Dynamics of High-Speed Milling with Long, Slender Endmills,” Annals of the CIRP, Vol. 47/1, pp. 55-60 https://doi.org/10.1016/S0007-8506(07)62784-X
  23. Davies, M.A., Pratt, J.R., Dutterer, B. and Burns, T.J., 2000, “The Stability of Low Radial Immersion Milling,” Annals of the CIRP, Vol. 49/1, pp. 37-40 https://doi.org/10.1016/S0007-8506(07)62891-1
  24. Davies, M.A., Pratt, J.R., Dutterer, B. and Burns, T.J., 2002, “Stability Prediction for Low Radial Immersion Milling,” Journal of Manufacturing Science and Engineering, Vol. 124, pp. 217-225 https://doi.org/10.1115/1.1455030
  25. Bayly, P.V., Mann, B.P., Schmitz, T.L., Peters, D.A., Stepan, G. and Insperger, T., 2002, “Effects of Radial Immersion and Cutting Direction on Chatter Instability in End-Milling,” Proceedings of IMECE, pp. 1-14
  26. Bayly, P.V., Halley, J.E., Mann, B.P. and Davies, M.A., 2003, “Stability of Interrupted Cutting by Temporal Finite Element Analysis,” Transactions of the ASME, Vol. 125, pp. 220-225 https://doi.org/10.1115/1.1556860
  27. Smith, S. and Tlusty, J., 1992, “Stabilizing Chatter by Automatic Spindle Speed Regulation,” Annals of the CIRP, Vol. 41/1, pp. 433-436 https://doi.org/10.1016/S0007-8506(07)61238-4
  28. Tlusty, J., 1993, “High-Speed Machining,” Annals of the CIRP, Vol. 42/2, pp. 733-738 https://doi.org/10.1016/S0007-8506(07)62536-0
  29. Kwon Won-Tae, 1994, “Cutting Force Analysis under Chatter Condition with a Worn Tool,” Transactions of the Korean Society of Mechanical Engineers, Vol. 18, No. 2, pp. 292-301
  30. Kim Gi Dae, Kwon Won Tae, Chu Chong Nam and Lee Jang Moo, 1994, “In-Process Chatter Detection Using Multiple Sensors in Turning,” Transactions of the Korean Society of Mechanical Engineers, Vol. 18, No. 7, pp. 1618-1631
  31. Jae-Hyun Park, Seong-Wook Hong, Hyun-soo Kim and Joong-Youn Park, 2000, “Milling Chatter Stability Analysis in Consideration of Gyroscopic Effect,” Journal of the Korean Society of Precision Engineering, Vol. 17, No. 2, pp. 58-63
  32. Moon-Ki Kim, 2001, “Diagnosis of Chatter Vibration using Frequency Domain in a Milling Process,” Transactions of the Korean Society of Machine Tool Engineers, Vol. 10, No. 3, pp.12-18
  33. Kim, Y.K., Yoon, M.C., Ha, M.K. and Sim, S.B., 2002, “A Study on the Behavior of Chatter in Milling Operation,” Journal of the Korean Society of Manufacturing Technology, Vol. 1, No. 1, pp. 123-132
  34. Moon-Chul Yoon, Hyun-Deog Cho and Eung-Soog Lee, 2003, “Natural Mode Analysis for Chatter Lobe Estimation,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 2, No. 2, pp. 60-66
  35. Sang-Lok Oh, Do-Hun Chin and Moon-Chul Yun, 2004, “Detection and Analysis of Chatter in Endmilling Operation,” Transactions of the Korean Society of Machine Tool Engineers, Vol. 13, No. 6, pp. 10-16
  36. Faassen, R.P.H., van de Wouw, N., Oosterling, J.A.J. and Nijmeijer, H., 2003, “Prediction of Regenerative Chatter by Modelling and Analysis of High-Speed Milling,” International Journal of Machine Tools & Manufacture, Vol. 43, pp. 1437-1446 https://doi.org/10.1016/S0890-6955(03)00171-8
  37. Ganguli, A., Deraemaeker, A. and Preumont, A., 2007, “Regenerative Chatter Reduction by Active Damping Control,” Journal of Sound and Vibration, Vol. 300, pp. 847-862 https://doi.org/10.1016/j.jsv.2006.09.005
  38. Duncan, G.S., Schmitz, T.L. and Kurdi, M., 2005, “Stability Lobe Uncertainty,” Proceedings of American Society for Precision Engineering Annual Meeting
  39. Duncan, G.S., Kurdi, M., Schmitz, T.L. and Snyder, J., 2006, “Uncertainty Propagation for Selected Analytical Milling Stability Limit Analyses,” Transactions of the NAMRI/SME, Vol. 34, pp. 17-24
  40. Il Hae Kim and Dong Young Jang, 2007, “A Cylindrical Spindle Displacement Sensor and its Application on High Speed Milling Machine,” Transactions of the Korean Society of Machine Tool Engineers, Vol. 16, No. 5, pp. 108-114
  41. Hun-Keun Jang, Il Hae Kim and Dong Young Jang, 2007, “Chatter Monitoring of Milling Process using Spindle Displacement Signal,” Transactions of the Korean Society of Machine Tool Engineers, Vol. 16, No. 6, pp. 140-145
  42. Budak, E., Altintas, Y. and Armarego, E. J. A., 1996, “Prediction of Milling Force Coefficients from Orthogonal Cutting Data,” Journal of Manufacturing Science and Engineering, Vol. 118, pp. 216-224 https://doi.org/10.1115/1.2831014
  43. Ewins, D.J., 2000, Modal Testing, Theory, Practice, and Application, Research Studies Press Ltd.