Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Compressive Characteristics of Composites According to the Micro-structure and Stacking angle

직조구조차이와 적층각의 변화에 따른 섬유강화복합재료의 압축특성

  • Published : 2009.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, static compressive test and compression-compression fatigue test of carbon/epoxy composites which have different micro-structures were carried out with respect to the bias angle. In order to find out the effect of the micro-structure of the fabric composite on compressive characteristics the specimens made of UD carbon/epoxy composite comprising the same fiber and matrix system as the fabric composite were also prepared. The compressive strength and modulus were measured and these values were used to develop a semi-empirical formula for predicting compressive strength of the fabric composite with bias angles. The fatigue behavior of the fabric composite with respect to the bias angle variation was also investigated.

본 논문에서는 편향각을 갖는 직물 복합재료 시편을 제작하여 정적 압축실험과 피로실험을 수행하고 그 결과를 비교하였다. 직물구조의 차이에 따른 압축거동을 평가하기 위해 동일한 섬유와 기지로 구성된 일방향 복합재료와 평직 복합재료의 적층순서를 동일하게 조절한 시편을 준비하였다. 정적 압축실험을 통해 편향각을 갖는 시편의 강성과 강도를 측정하였고, 측정된 강도를 바탕으로 압축강도 예측식을 제안하였다. 피로실험을 통해 복합재료의 직물 구조의 차이에 의한 피로수명의 변화를 관찰하였으며, 편향각의 변화와 하중조건에 따른 피로수명의 차이를 비교하였다.

Keywords

References

  1. 김영익, 최상민, "국내개방 항공기의 복합재료 적용사례," 한국복합재료학회지, Vol. 16, No. 1, 2003, pp. 68-74
  2. 이상진, 정종철, 오경원, 조세현, 목재균, "복합재료를 적용한 도시형 연료전지 고무차륜 Tram 시스템 및 차체 제작기술 개발," 한국복합재료학회지, Vol. 18, No. 2, 2005, pp. 59-64
  3. 권종오, 이재규, 김효철, 김재성, "새로운 생산 시스템을 이용한 복합재료 선박의 시험 건조와 성능에 관한 연구," 대한조선학회 추계학술대회 논문집 2001, pp. 100-103
  4. 홍건호, 한복규, 김기수, "섬유 복합재료의 건설구조물 적용 기술," 한국복합재료학회지, Vol. 18, No. 5, 2005, pp. 40-46
  5. Chang, S. H., Sutchliffe, M. P. F. and Sharma, S. B., "Microscopic Investigation of Tow Geometry Changes ina Woven Prepreg Material during Draping and Consolidation," Composites Science and Technology, Vol. 64, 2004, pp. 1701-1707 https://doi.org/10.1016/j.compscitech.2004.01.004
  6. Tan, S. C., " Stress Analysis and the Testing of Celanese and IITRI Compression Specimens," Composite Science and Technology, Vol. 44, No. 1, 1992, pp. 57-70 https://doi.org/10.1016/0266-3538(92)90025-X
  7. Haberle, J. G. and Matthews, F. L., "The Influence of Test Method on the Compressive Strength of Several Fiber-reinforced Plastics," Journal of Advanced Materials, Vol. 25, No. 1, 1993, pp. 35-45
  8. Hosur, M. V., Adya, M., Vaidya, U. K., Mayer, A. and Jeelani, S., "Effect of stitching and weave architecture on the high strain rate compression response of affordable woven carbon/epoxy composites," Composite Structures, Vol. 59, 2003, pp. 507-523 https://doi.org/10.1016/S0263-8223(02)00247-7
  9. Fleck, N. A., "Compressive Failure of Fiber Composites," Advances in Applied Mechanics, Vol. 33, 1997, pp. 43-117 https://doi.org/10.1016/S0065-2156(08)70385-5
  10. Daniel, I. M., Hsiao, H. W. and Wooh, S. C., "Failure mechanisms in thick composites under compressive loading," Composites Part B: Engineering, Vol. 27, No. 6, 1996, pp. 543-552 https://doi.org/10.1016/1359-8368(95)00010-0
  11. Reifsnider, K. L. and Mirzadeh, F., "Compressive strength and mode of failure of 8H Celion 3000/PMRI5 woven composite material," Journal of Composites Technology & Research, Vol. 10, No. 4, 1998, pp. 156-164 https://doi.org/10.1520/CTR10279J
  12. 김성집, 장승환, "편향각과 전단각이 탄소섬유/에폭시 평직 복합재료의 압축특성에 미치는 영향," 대한기계학회논문집(A), Vol. 30, No.7, 2006, pp. 68-74 https://doi.org/10.3795/KSME-A.2006.30.7.857
  13. Marie-Laetitia Pastor, Xavier Balandraud, Michel Gre'diac, Jean-Louis Robert, "On the fatigue response of aluminium specimens reinforced with carbon epoxy patches," Composite Structures Vol. 83, 2008, pp. 237-246 https://doi.org/10.1016/j.compstruct.2007.10.038
  14. Cornelia E. Demers, " Fatigue strength degradation of E-glass FRP composites and carbon FRP composites," Construction and Building Materials Vol. 23, 1998, pp. 311-318 https://doi.org/10.1016/j.conbuildmat.2007.12.004
  15. Jen, M. H. R. and Lee, C. H., "Strength and life in thermoplastic composite laminates under static and fatigue loads. Part 1: Experimental," International journal of fatigue, Vol. 20, No. 9, 1998, pp. 605-615 https://doi.org/10.1016/S0142-1123(98)00029-2
  16. ASTM D 3410/3410M - 03, "Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading."
  17. ASTM D695 -02a, "Standard Test Method for Compressive Properties of Rigìd Plastics."